Does anyone know where I could get a T-Piece from? I've tried my local halfords and the only ones they had were miles to big Any ideas? I need it to fit my Boost gauge on a MY96.
Thanks

 

I think you can use one off the washer pipes to your screen jets,i did to use a boost guage recently but wasnt a permanent fixture.

 

I have some brass ones in stock off the Dawes Devices Deluxe Kits.

Jamie

www.j-w-racing.com
www.performanceexhausts.net

 

pet shop
they use them for the air lines on fish tanks


garry

 

RPM in Ware. I've got a spare plastic one you can have . Email me your address off line.


AllanB

 

Thanks
Guys

 

And if all those suggestions fail, Demon Tweeks have loads of different sizes in their (race) catalogue.

 

I used a washer jet one from Halfords, get the 4.6mm diameter one it fits perfectly into the original pipe. I used a short bit of 3mm ID rubber hose from B&Q to hook the boost pipe into the t-piece. Put the short bit of hose onto the T-piece then the pipe from the gauge goes inside the bit of hose.

Stuart