hope sopmeone can help, i have a 2002 sti running 415 at the moment but im restriceted because of the maf tube size, been told by andy forrest to upgrade to an 80mm tube as all my other pipework is 80mm but cant fid one anywhere

 

Any use to you? close enough to 80mm to work?

3" MAF tube for WRX/STi

 

Not sure what induction etc you have, but Roger Clarke do an 80mm induction kit with a huge K&N cone filter.

You need to fit it - or any 80mm MAF tube - immediately prior to mapping. Do not drive it until mapped, as I know to my cost!

 

I HAVE the roger clarke one but its no use there is no where for it to go so sending it back, so i also need a new induction kit.

WUZ Andy says i idealy need an 80mm one.

 

Out of interest, why does it not fit?

 

its huge, if you imagine the end of the cone on the inner wing the end of the trumpet is past the intake pipe, and there is no mount for a MAF on it.

 

Must be different to my one then?

 

They sent you th wrong one, contact and tell them you are running the oem ecu and you need the "short" filter to go with the maf version, also they should supply you the Samco pipe (extra cost) as this is crucial to the install and getting the car sorted out in respect of scaling etc.

cheers

bob

 

AH OK, i already have the 80mm samco afta maf pipe, so im ok there, il send it back ASAP cheers

 

i cant seem to find the 80mm one on the RC site, i have found the one they sent me and its the Gobstopper one 260mm long with 100mm trumpet

 

It's a special they did for Bob Rawle, probably best you give them a call.

 

AH ok thanks for the reply guys hopefully i can get this sorted and get the car to produce the power it should

 

anyone got any other 80mm induction kit options??

 

Presumably, RCM sent you this one, right?:-

Roger Clark Motorsport - RCM Product Detail



But you prob need this one?:-

Roger Clark Motorsport - RCM Product Detail

It looks like the same one in tim's pic, so hopefully will fit in the available space.

(I think this is what Bob is getting at(?))

 

Can't RCM supply one like mine then? I'm sure they still do it.

 

Tim, is your kit this?:-

Roger Clark Motorsport - RCM Product Detail

Roger Clark Motorsport - RCM Product Detail

 

im not sure they havent got back to me yet

 

No - the filter looks the same, but the trumpet is not right as it does not have the MAF flange.

I bought mine second hand, so don't know the part number I'm afraid.

 

Oops stupid me.

Yours is this one isn't it?:-

Roger Clark Motorsport - RCM Product Detail

This should be what the OP needs too, yes?

 

yeah basicaly need that but it doesnt say if its 80mm or not

 

Ring 'em!

Olly's extremely helpful over the phone and will tell you all you need to know, etc...

 

No, that's still not the right one, as it's not 80mm. As already suggested bu others, I really recommend you phone them.

 

I'll get me coat.

At least that answers the OP's question as far as that particular item goes.

 

CHEERS LADS WILL phone them on monday

 

I've got the bigger MAF pipe, plus MAF housing and RCM induction for sale if your interested.

PM me for more details.