Intercooler spray bottle.....
12 January 2009, 08:11 PM
#1
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Oct 2008
Location: West Sussex
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Intercooler spray bottle.....
I'm fitting a genuine spray bottle into the boot of my wrx bugeye, but seems to be something missing. Am i right in thinking that it's held in by 2 bolts? If so is there a bracket that the front bolt of the bottle bolts too?
I have the complete bottle (bottle & tray), but the bolt hole for the front fixing doesn't line up with anything.....anyone shed any light on this please.
Any pictures would be nice
Rich
I have the complete bottle (bottle & tray), but the bolt hole for the front fixing doesn't line up with anything.....anyone shed any light on this please.
Any pictures would be nice
Rich
14 January 2009, 05:01 AM
#2
Scooby Newbie
Join Date: Dec 2008
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Hey mate
you need to make sure that you have go the right year bottle for the right year car. most of them will line up with the back seat support brackets. If you find your not lining up then you might have the wrong bottle. You could always get a bracket made just make sure that the bottom of the bottle sits in the floor in the boot
Lee
you need to make sure that you have go the right year bottle for the right year car. most of them will line up with the back seat support brackets. If you find your not lining up then you might have the wrong bottle. You could always get a bracket made just make sure that the bottom of the bottle sits in the floor in the boot
Lee
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Flat4x4-again
General Technical
2
29 September 2015 06:32 PM