Notices
Drivetrain Gearbox, Diffs & Driveshafts etc

Rear LSD diff (R160) question...

Thread Tools
 
Search this Thread
 
Old May 9, 2008 | 05:05 PM
  #1  
WimprezawrX's Avatar
WimprezawrX
Thread Starter
Scooby Regular
 
Joined: Feb 2007
Posts: 330
Likes: 0
From: The Netherlands
Default Rear LSD diff (R160) question...

I have a Plated LSD rear R160 diff...

When i drive a round a slight corner, it looks and hears like, there is something braking of the car....

Its a hard mechanical sound, what is not okee... i think.

I have tryed everything, and thinking of taking it off the car...

I all ready changed the preload to less tight
(about 35nm, it was 65nm )...

I can also change the ramp, its now sitting in the easy ramp...









Does anybody have more experiences?

Tomorrow iam setting it on the hard ramp, hope it helps...

Any ideas are welcome...

Last edited by WimprezawrX; May 9, 2008 at 05:29 PM.
Reply
Old May 9, 2008 | 05:29 PM
  #2  
PeeVee's Avatar
PeeVee
Scooby Regular
iTrader: (1)
 
Joined: Dec 2000
Posts: 1,496
Likes: 0
From: Canterbury. Kent
Default

This is perfectly normal & there is nothing wrong with the diff.

No matter what you do it will always make a noise.

Phil
Reply
Old May 9, 2008 | 05:34 PM
  #3  
WimprezawrX's Avatar
WimprezawrX
Thread Starter
Scooby Regular
 
Joined: Feb 2007
Posts: 330
Likes: 0
From: The Netherlands
Default

Originally Posted by Barretts Motorsport
This is perfectly normal & there is nothing wrong with the diff.

No matter what you do it will always make a noise.

Phil

I now that it makes noise...

But these kinds of bangs?
I can feel, hear and looks like something is going to break...

Also its a oem plated diff, cant imagane that Subaru make it so noisy...
Reply
Old May 9, 2008 | 05:36 PM
  #4  
WimprezawrX's Avatar
WimprezawrX
Thread Starter
Scooby Regular
 
Joined: Feb 2007
Posts: 330
Likes: 0
From: The Netherlands
Default

Is the ramp sitting okee, this way???

Reply
Old May 9, 2008 | 05:40 PM
  #5  
PeeVee's Avatar
PeeVee
Scooby Regular
iTrader: (1)
 
Joined: Dec 2000
Posts: 1,496
Likes: 0
From: Canterbury. Kent
Default

These diffs are not really meant for road use, they are designed for competition cars.

Road cars are built with a viscous diff because they are silent.

I'm afraid you are going to either put up with the noise/bangs or refit the standard viscous unit.

Phil
Reply
Old May 9, 2008 | 05:42 PM
  #6  
PeeVee's Avatar
PeeVee
Scooby Regular
iTrader: (1)
 
Joined: Dec 2000
Posts: 1,496
Likes: 0
From: Canterbury. Kent
Default

Originally Posted by WimprezawrX
Is the ramp sitting okee, this way???

I'm on a restricted work internet connection so can't see your piccis unless you post them directly on scoobynet.
Reply
Old May 9, 2008 | 08:16 PM
  #7  
WimprezawrX's Avatar
WimprezawrX
Thread Starter
Scooby Regular
 
Joined: Feb 2007
Posts: 330
Likes: 0
From: The Netherlands
Default

This is the only way i can put pictures up...
Reply
Old May 10, 2008 | 08:53 AM
  #8  
PeeVee's Avatar
PeeVee
Scooby Regular
iTrader: (1)
 
Joined: Dec 2000
Posts: 1,496
Likes: 0
From: Canterbury. Kent
Default

You need to set the ramp angles at 45/45 degrees
Reply
Old May 10, 2008 | 04:52 PM
  #9  
WimprezawrX's Avatar
WimprezawrX
Thread Starter
Scooby Regular
 
Joined: Feb 2007
Posts: 330
Likes: 0
From: The Netherlands
Default

Hi,

Just finished the diff.

Ive set the preload on oem (about 60/65nm)
Turned the cone spring around, now pressing in the hart of the plates...
(was pressing only in the middel)
Also changed the ram, to slow working (was fast)

Drove a it on the hiway for an half hour, and changed the LSD oil..

It's now reasonbly quiet, no more bang and klunks...

Not when i drive on to the parking lot, or with sharp turning ...

You deff feel/hear the plated diff working under the car

I am a ferry happy man again...
Reply
Old May 18, 2008 | 09:14 PM
  #10  
swisstonihasher's Avatar
swisstonihasher
Scooby Regular
 
Joined: Jun 2006
Posts: 1,568
Likes: 0
From: South West
Default

What's plated diff give you over say an R180?

I've got the suretrac R180 and love it, it wants to kick the back end out on high power in bends which is perfect for my driving style as hate front going (never happens with all mods I've done). Just wonder what plate would give extra?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
Nov 4, 2021 07:12 PM
radave
Subaru Parts
2
Jul 16, 2016 02:19 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM
WrxSti03
Drivetrain
11
Sep 29, 2015 10:21 AM




All times are GMT +1. The time now is 09:16 AM.