Notices
General Technical
Sponsored by:
Sponsored by: CARiD

question

Thread Tools
 
Search this Thread
 
Old Feb 3, 2008 | 12:54 PM
  #1  
flashgordon666's Avatar
flashgordon666
Thread Starter
Scooby Regular
 
Joined: Dec 2007
Posts: 292
Likes: 0
Default question

on the way home i thought id see how fast my scooby could go so at 60mph in 5th gear i put my foot down, at 80mph it felt like the engine wasnt putting the power anywhere and the rev counter went from 5 to 7, is that normal??
I tried it again at 100mph the rev was 6-7 is that normal. Seen as my mph goes up to 180.
Reply
Old Feb 3, 2008 | 03:00 PM
  #2  
Jolly Green Monster's Avatar
Jolly Green Monster
Former Sponsor
iTrader: (4)
 
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Default

clutch slip?
Reply
Old Feb 3, 2008 | 03:01 PM
  #3  
tow13's Avatar
tow13
Scooby Regular
iTrader: (2)
 
Joined: Jan 2008
Posts: 200
Likes: 0
Default

nah dosnt sound right your saying you where doing a 100 (on track)at about 6k revs ball park figure i think you should have been doing 140 are you getting any spikes on your revs shooting up and no difference in speed if so you may have clutch probs.
Reply
Old Feb 3, 2008 | 03:46 PM
  #4  
Gav1's Avatar
Gav1
Scooby Regular
 
Joined: Jan 2005
Posts: 436
Likes: 0
From: Stoke on Trent
Default

if your revs are spiking but youre getting no gain in speed your clutch is fooked.

as per prev reply it sounds like your clutch is slipping.
Reply
Old Feb 3, 2008 | 05:41 PM
  #5  
flashgordon666's Avatar
flashgordon666
Thread Starter
Scooby Regular
 
Joined: Dec 2007
Posts: 292
Likes: 0
Default

yeah if i put my foot down say at 80 it will rev up spike you can hear everything working but to me it should shift to 100 in like a couple seconds, if i do it slow its ok. but it doesnt seen to want to go past 100mph like all the powers there but it aint goign anywhere, and when it splike you jump 2k revs without the other mph moving much maybe 81-83mph.
  1. How much is the labour to do a clutch? I can get a clutch.
  2. If I keep using it when will it go and
  3. what could happen
  4. how do i know its gone.
  5. And are they easy to replace.
Reply
Old Feb 3, 2008 | 06:34 PM
  #6  
tow13's Avatar
tow13
Scooby Regular
iTrader: (2)
 
Joined: Jan 2008
Posts: 200
Likes: 0
Default

you will know when your clutch goes mate you will have difficulty in selecting gears and pos not engage at all.you will be looking at about £280/£300 for an excedy clutch fitted as for the life span of it all depends how you drive it could go shortly or last for ages.when you get it done though it might be worth your while fitting a light weight fly wheel as well.
Reply
Old Feb 3, 2008 | 07:06 PM
  #7  
flashgordon666's Avatar
flashgordon666
Thread Starter
Scooby Regular
 
Joined: Dec 2007
Posts: 292
Likes: 0
Default

Originally Posted by tow13
might be worth your while fitting a light weight fly wheel as well.
what would that do? reduce weight > more speed?
Reply
Old Feb 4, 2008 | 06:23 PM
  #8  
tow13's Avatar
tow13
Scooby Regular
iTrader: (2)
 
Joined: Jan 2008
Posts: 200
Likes: 0
Default

i think its to do with inertia on the fly a lighter one does not need as much power to turn hence your car revs faster.
Reply
Old Feb 4, 2008 | 07:00 PM
  #9  
Turbotits's Avatar
Turbotits
Scooby Regular
20 Year Member
iTrader: (2)
 
Joined: Jan 2004
Posts: 4,312
Likes: 0
From: Hertfordshire
Default

def the clutch. getting some slip as the boost come in right where the max torque is

New clutch is the only way
Reply
Old Feb 5, 2008 | 06:16 PM
  #10  
Marx Mcrae's Avatar
Marx Mcrae
Scooby Regular
iTrader: (4)
 
Joined: May 2003
Posts: 2,567
Likes: 0
From: Doncaster, UK
Default

If you dont get a new fly wheel then be prepared to have you original one skimmed
Reply
Old Feb 5, 2008 | 08:49 PM
  #11  
flashgordon666's Avatar
flashgordon666
Thread Starter
Scooby Regular
 
Joined: Dec 2007
Posts: 292
Likes: 0
Default

Originally Posted by Marx Mcrae
If you dont get a new fly wheel then be prepared to have you original one skimmed
ive seen ones on sale names "skimmed" and just thought it was a made. I take it skimmed is repolished or something.

PS marx nice body work

Yeah i just tried it again foot down in 3rd and stop power after 50ish. But if i do it slow its ok.
Also battery lights now coming on when i start scobby, so ill charge it and see if i dont have to buy a new one like i did on my celica.
Reply
Old Feb 6, 2008 | 03:47 PM
  #12  
tow13's Avatar
tow13
Scooby Regular
iTrader: (2)
 
Joined: Jan 2008
Posts: 200
Likes: 0
Default

if you do get your fly skimmed make sure it is done from someone you trust or have a good record etc etc as i have heard they can be put off balance.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
Nov 4, 2021 07:12 PM
slimwiltaz
General Technical
20
Oct 9, 2015 07:40 PM
IanG1983
Wheels, Tyres & Brakes
2
Oct 6, 2015 03:08 PM
Brzoza
Engine Management and ECU Remapping
1
Oct 2, 2015 05:26 PM
the shreksta
Other Marques
26
Oct 1, 2015 02:30 PM




All times are GMT +1. The time now is 08:41 AM.