Painting orange wedges
I have decided to paint my orange wegdes on my DMB classic silver.
Just wondering do they require rubbing down first and do you need a coat of primer?
Also what paint is the best to use?
Cheers
Just wondering do they require rubbing down first and do you need a coat of primer?
Also what paint is the best to use?
Cheers
Best to clean them up with panel wipe and use a proper plastic primer (not the sh*t you get in rattle cans from halfords)...
Go to your local paint supplier and get a small tin of cellulose thinners and some UPol plastic primer.. wipe down the wedges with the celly, give them a very light sand with some 800 gritt then prime with the upol.
Go to your local paint supplier and get a small tin of cellulose thinners and some UPol plastic primer.. wipe down the wedges with the celly, give them a very light sand with some 800 gritt then prime with the upol.
i did mine last week.i prised them off gently with a screw driver then used thinners to get the paint off using a sponge and a tooth brush.then gave them a good wash down and rinse.i have left mine unpainted as the plastic is a charcoal grey colour which looks good with my dbm colour.
Popped mine off when I bought the car new in May 2000.
Hung them in the garage and sprayed matt black - didn't bother with any prep.
Re-installed 3 hours later - jobs a good 'un
Now needing re-spray as stone-chips of Orange are showing through ...
Hung them in the garage and sprayed matt black - didn't bother with any prep.
Re-installed 3 hours later - jobs a good 'un
Now needing re-spray as stone-chips of Orange are showing through ...
Trending Topics
i did mine last week.i prised them off gently with a screw driver then used thinners to get the paint off using a sponge and a tooth brush.then gave them a good wash down and rinse.i have left mine unpainted as the plastic is a charcoal grey colour which looks good with my dbm colour.
did you actually know that if you soak the wedges in thinners or paint stripper they are actually black to start with.Thats what i did stripped them back to the bare plastic and just gave them a couple of coats in matt black spray paint job done
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
shorty87
Wheels And Tyres For Sale
0
Sep 25, 2015 08:36 PM








