Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Thinking of upgradeing the turbo

Thread Tools
 
Search this Thread
 
Old Nov 28, 2006 | 02:06 PM
  #1  
Biggs's Avatar
Biggs
Thread Starter
Scooby Regular
iTrader: (14)
 
Joined: Aug 2005
Posts: 1,088
Likes: 0
From: East Barnet/southgate on the borders of North London and Hertfordshire
Default Thinking of upgradeing the turbo

Hi guys/gals

Ive got a my99 uk 2000 turbo.which at the moment has a td05 amongst a few other mods and its pushing roughly 340 bhp... I thinking of changeing the turbo in the near future in the hope to be chaseing the 400bhp mark.

What i would like to know is what turbo would be best for this (if not the unit i already have).. I would like to try and keep lag as low as possible (who dosent) as at the moment its a great car to drive on the road.. i dont do any track driving at all but would like to do the occasional qtr mile run.

any input greatly recieved

cheers

me
Reply
Old Nov 28, 2006 | 02:59 PM
  #2  
renno rannes's Avatar
renno rannes
Scooby Regular
 
Joined: Aug 2004
Posts: 732
Likes: 0
From: Dublin
Default

If its still the UK gearbox in the car id Imagine that will be one of the limiting factors or at least worth budgeting for if it does happen to brake at some stage. Ive heard the limit is around the 350lbs level.

There are a few people running that on standard UK internals I THINK but I dont know if id chance it myself to be honest. Then your injectors are 440cc which are good for around 350bhp and even with the raised fuel pressure I cant see them streching to your target.

20g Turbo with normal fuel might get you close to 400bhp but on a 2 Litre car the 18g would be my choice for mid range power and every day driver although wont make 400bhp. Think the only way to defo clear 400 is a TD06 49 or the likes which on a 2.0 Litre you will be sacrificing your early spool up.

Im sure there will be others along to go into more detail or cover the parts ive left out but hopefully that will give you something to look into
Reply
Old Nov 28, 2006 | 03:26 PM
  #3  
Biggs's Avatar
Biggs
Thread Starter
Scooby Regular
iTrader: (14)
 
Joined: Aug 2005
Posts: 1,088
Likes: 0
From: East Barnet/southgate on the borders of North London and Hertfordshire
Default

Cheers mate like i said the td05 is just part of my mods i do run bigger injectors,walbro pump,front mount,bigger exhaust blah blah ive got a water inj kit sitting here too thats going to get fitted at somepoint over christmas.

Again i love the way the car pulls at the minute so if i can get abit more power out of her with the td05 then thats a bonus as i dont want to loose the spool up

How can i determine what varient of td05 i have ?? is it something i can determine just by looking at it..or does it need removeing and measureing etc ?
Reply
Old Nov 28, 2006 | 03:37 PM
  #4  
Neilo's Avatar
Neilo
Scooby Regular
 
Joined: Jul 2003
Posts: 5,734
Likes: 0
From: Behind the wheel of a Time Attack R33 GTR
Default

if you dont know, then its most likely a run of the mill 16g.
Reply
Old Nov 28, 2006 | 04:55 PM
  #5  
Midlife......'s Avatar
Midlife......
Scooby Regular
iTrader: (2)
 
Joined: Feb 2004
Posts: 11,583
Likes: 4
Default

I've got a TD05 18G running methanol / water injection with the usual mods...near as damn it to 400 BHP

Spools up pretty good too

Midlife.....
Reply
Old Nov 28, 2006 | 06:11 PM
  #6  
renno rannes's Avatar
renno rannes
Scooby Regular
 
Joined: Aug 2004
Posts: 732
Likes: 0
From: Dublin
Default

Originally Posted by Midlife......
I've got a TD05 18G running methanol / water injection with the usual mods...near as damn it to 400 BHP

Spools up pretty good too

Midlife.....
Nice, what boost are you running Midlife ?

@biggs. Thats good you have alot already in place so.
Reply
Old Nov 28, 2006 | 08:22 PM
  #7  
Biggs's Avatar
Biggs
Thread Starter
Scooby Regular
iTrader: (14)
 
Joined: Aug 2005
Posts: 1,088
Likes: 0
From: East Barnet/southgate on the borders of North London and Hertfordshire
Default

Originally Posted by renno rannes
@biggs. Thats good you have alot already in place so.
Yeah like i say mate its had a few bits done i think now its just the turbo holding it back from the power im after

heres my engine spec

Tek3 By Andy Forest 1.75bar
Front Entry Td05
550cc injectors
Iridium Spark Plugs
Walbro Pump
Fse FPR
Hybrid front mount
K+N Induction Kit
blitz nur spec system
Headers and up-pipe ported and wrapped
Exedy Organic Clutch
6.0kg Flywheel
Alloy Catch Can
Reply
Old Nov 28, 2006 | 08:31 PM
  #8  
renno rannes's Avatar
renno rannes
Scooby Regular
 
Joined: Aug 2004
Posts: 732
Likes: 0
From: Dublin
Default

Originally Posted by Biggs
Yeah like i say mate its had a few bits done i think now its just the turbo holding it back from the power im after

heres my engine spec

Tek3 By Andy Forest 1.75bar
Front Entry Td05
550cc injectors
Iridium Spark Plugs
Walbro Pump
Fse FPR
Hybrid front mount
K+N Induction Kit
blitz nur spec system
Headers and up-pipe ported and wrapped
Exedy Organic Clutch
6.0kg Flywheel
Alloy Catch Can
Sounds good. The 18g spools more or less the same as the 16g AFAIK so id say that would be perfect and a decent step up.

Renno
Reply
Old Nov 28, 2006 | 09:40 PM
  #9  
Biggs's Avatar
Biggs
Thread Starter
Scooby Regular
iTrader: (14)
 
Joined: Aug 2005
Posts: 1,088
Likes: 0
From: East Barnet/southgate on the borders of North London and Hertfordshire
Default

Cheers for your replys fella... ill look into that abit more.
Reply
Old Nov 28, 2006 | 11:08 PM
  #10  
Midlife......'s Avatar
Midlife......
Scooby Regular
iTrader: (2)
 
Joined: Feb 2004
Posts: 11,583
Likes: 4
Default

Renno

Running 1.4 bar

As I'm on the OEM engine and gearbox Bob Rawle has mapped the car to stop the turbo from destroying the drivetrain.

Shaun
Reply
Old Nov 28, 2006 | 11:11 PM
  #11  
renno rannes's Avatar
renno rannes
Scooby Regular
 
Joined: Aug 2004
Posts: 732
Likes: 0
From: Dublin
Default

Originally Posted by Midlife......
Renno

Running 1.4 bar

As I'm on the OEM engine and gearbox Bob Rawle has mapped the car to stop the turbo from destroying the drivetrain.

Shaun
Ah very clever I wasent sure that would be possible.
Reply
Old Nov 28, 2006 | 11:21 PM
  #12  
Midlife......'s Avatar
Midlife......
Scooby Regular
iTrader: (2)
 
Joined: Feb 2004
Posts: 11,583
Likes: 4
Default

Renno

Tongue in cheek here.....

there was a post on another thread saying that some mapper was a tuning God (it's the rolling road versus road mapping thread).

I was so tempted to say that the position was already taken by Bob Rawle with little chance of the post being re-advertised ..LOL

Shaun
Reply
Old Nov 28, 2006 | 11:52 PM
  #13  
renno rannes's Avatar
renno rannes
Scooby Regular
 
Joined: Aug 2004
Posts: 732
Likes: 0
From: Dublin
Default

Originally Posted by Midlife......
Renno

Tongue in cheek here.....

there was a post on another thread saying that some mapper was a tuning God (it's the rolling road versus road mapping thread).

I was so tempted to say that the position was already taken by Bob Rawle with little chance of the post being re-advertised ..LOL

Shaun
LOL Im following that thread with great intrest but was afraid to post in it
Reply
Old Nov 29, 2006 | 11:45 PM
  #14  
Midlife......'s Avatar
Midlife......
Scooby Regular
iTrader: (2)
 
Joined: Feb 2004
Posts: 11,583
Likes: 4
Default

Renno

You were "afraid" to post....... I was "scared" to post on it !!

Bob Rawle / Andy Forrest get my vote

Shaun
Reply
Old Nov 30, 2006 | 12:24 AM
  #15  
WRX_Rich's Avatar
WRX_Rich
Scooby Regular
iTrader: (5)
 
Joined: Feb 2003
Posts: 2,625
Likes: 0
From: Worcester
Default

you may struggle to get 400 bhp with a td05 18 or 20 g with std pistons

Shaun is one of the lucky ones
Reply
Old Nov 30, 2006 | 10:32 AM
  #16  
jasonius's Avatar
jasonius
Scooby Regular
iTrader: (1)
 
Joined: Oct 2004
Posts: 4,791
Likes: 0
From: Half way up
Default

I'd be thinking of changing the FSE reg to something a little more reliable..
Reply
Old Nov 30, 2006 | 12:16 PM
  #17  
New_scooby_04's Avatar
New_scooby_04
Moderator
iTrader: (4)
 
Joined: Jul 2004
Posts: 18,687
Likes: 0
From: The Terry Crews of moderation. P P P P P P POWER!!
Default

Not sure I'd be going too close to 400bhp with the std engine and transmission.

A well set up 18g would be a VERY good everyday proposition.

I too have heard dodgy comments about the FSE reg, but if it's working then fair enough!

Bob gets my vote, as he did my mapping and I was extremely impresssed! Andy's reputation speaks for itself too though, so whoever is closer!

Ns04
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
Jan 11, 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
Dec 14, 2015 08:16 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
Oct 22, 2015 06:12 AM
hardcoreimpreza
Computer & Technology Related
14
Sep 14, 2015 11:29 AM




All times are GMT +1. The time now is 05:37 AM.