Notices
General Technical
Sponsored by:
Sponsored by: CARiD

jerkiness at 2000-3000 rpm on a steady throttle - any ideas.

Thread Tools
 
Search this Thread
 
Old Sep 21, 2006 | 11:13 AM
  #1  
The Chief's Avatar
The Chief
Thread Starter
Scooby Regular
 
Joined: Oct 2004
Posts: 8,328
Likes: 0
From: There is only one God - Elvis!
Default jerkiness at 2000-3000 rpm on a steady throttle - any ideas.

Cars being doing this for a while now - whilst holding a steady throttle at say 2000-2500rpm the car seems to be hesitating and tends to be a bit jerky - also say in 4th with my foot to the floor it accelerate like buggery then it will stop for a split second - but it literally is like hitting a brick wall.
the other is a very intermittent idle - as if its gonna cut out (it doesn't)

I'm thinking my lambda sensor, or could be my MAF sensor (although this was replaced around 18 months ago)

Car is a MY99 classic - full decat, sti panel filter, resonator box removed, sti uprated fuel pump and a Andy Forrest remap.

Any help greatly appreciated

Cheers
Reply
Old Sep 21, 2006 | 11:52 AM
  #2  
New_scooby_04's Avatar
New_scooby_04
Moderator
iTrader: (4)
 
Joined: Jul 2004
Posts: 18,687
Likes: 0
From: The Terry Crews of moderation. P P P P P P POWER!!
Default

Lambda sensor would be my guess mate.

Was your resonator box removed when you had it remapped?

Ns04
Reply
Old Sep 21, 2006 | 12:27 PM
  #3  
The Chief's Avatar
The Chief
Thread Starter
Scooby Regular
 
Joined: Oct 2004
Posts: 8,328
Likes: 0
From: There is only one God - Elvis!
Default

Originally Posted by New_scooby_04
Lambda sensor would be my guess mate.

Was your resonator box removed when you had it remapped?

Ns04

Yes did all the mods before the remap.

going on a run tonight - will i be ok??
Reply
Old Sep 21, 2006 | 12:32 PM
  #4  
jaydut's Avatar
jaydut
Scooby Regular
 
Joined: Jul 2006
Posts: 680
Likes: 0
From: In a house with windows and doors
Default

could it be somethin as simple as dodgy plug or coil as i had a similiar prob on another car and it was a dodgy coil pack
Reply
Old Sep 21, 2006 | 12:41 PM
  #5  
Heple's Avatar
Heple
Scooby Regular
 
Joined: Mar 2005
Posts: 712
Likes: 0
From: Lancashire : MY99 UK Turbo
Default

Sounds like the Lambda mine did this on my MY99 UK Turbo.

Replaced it with a universal one from here :

http://www.gendandirect.co.uk/product_O23WIRE.html

Its fine now.

Worth a try for £30.

Or

£43.45 for the better Bosch LS 02

http://cgi.ebay.co.uk/BOSCH-UNIVERSA...QQcmdZViewItem

Craig

Last edited by Heple; Sep 21, 2006 at 12:43 PM.
Reply
Old Sep 21, 2006 | 12:55 PM
  #6  
The Chief's Avatar
The Chief
Thread Starter
Scooby Regular
 
Joined: Oct 2004
Posts: 8,328
Likes: 0
From: There is only one God - Elvis!
Default

Originally Posted by Heple

Or

£43.45 for the better Bosch LS 02

http://cgi.ebay.co.uk/BOSCH-UNIVERSA...QQcmdZViewItem

Craig
So this will fit a MY99 Classic will it???

cheers for that
Reply
Old Sep 21, 2006 | 12:57 PM
  #7  
Heple's Avatar
Heple
Scooby Regular
 
Joined: Mar 2005
Posts: 712
Likes: 0
From: Lancashire : MY99 UK Turbo
Default

Originally Posted by The Chief
So this will fit a MY99 Classic will it???

cheers for that
Certainly will

I bought an AFR guage after i changed mine, it helps spot Engine/Lambda issues, definatly worth the pennies. (its already dianosed a weak fuel pump on mine)

Hope this works otherwise your prob gonna be down the dreaded MAF route.

Craig
Reply
Old Sep 21, 2006 | 01:10 PM
  #8  
Heple's Avatar
Heple
Scooby Regular
 
Joined: Mar 2005
Posts: 712
Likes: 0
From: Lancashire : MY99 UK Turbo
Default

Originally Posted by The Chief
So this will fit a MY99 Classic will it???

cheers for that
Just a note,

This is a universal lambda, you will need to wire it in yourself as it will not come with a plug.

It only requires cutting the 3 lambda wires and connecting the new lambda wires maching the colours. (i used bullet connectors as soldering doesn't work well becuase of the high temp wire).

Craig
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
Nov 13, 2015 10:49 AM
jobegold@hotmail.co.uk
ScoobyNet General
2
Sep 27, 2015 09:44 PM
shorty87
Other Marques
0
Sep 25, 2015 08:52 PM




All times are GMT +1. The time now is 03:06 AM.