Re-Moving front bumper how?
#1
Scooby Newbie
Thread Starter
Join Date: May 2006
Location: witham essex
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Re-Moving front bumper how?
my93 classic front bumper needs to come off does anyone know how to get it off? i havent got a clue I need to know where the bolts are and how many to look for and anything else that will need to come off. I only need if off for about 5mins so i dont want to take lights out ect
Thanks
Thanks
#2
If you do a search on here you will find some pretty detailed instructions but from memory.
You need to remove the headlights, sidelights and grill and there are between 5-7 bolts along the top of the bumper.
You then need to remove part of the plastic inner wheel lining as there is a bolt in the top corner on each side of the bumper where it meets the wheels.
You will need to remove the number plate and Number plate holder as this also holds the bumper on, there are two bolts which I think are Torx bolts.
As you remove the bumper you will need to unplug the indicators.
All the ducting for the brakes just pulls apart I think.
hope that helps
Benno
You need to remove the headlights, sidelights and grill and there are between 5-7 bolts along the top of the bumper.
You then need to remove part of the plastic inner wheel lining as there is a bolt in the top corner on each side of the bumper where it meets the wheels.
You will need to remove the number plate and Number plate holder as this also holds the bumper on, there are two bolts which I think are Torx bolts.
As you remove the bumper you will need to unplug the indicators.
All the ducting for the brakes just pulls apart I think.
hope that helps
Benno
#6
it is easy!!!
although i prefer to leave headlights in and just unbolt the 4 bolts going through the chassis legs that way you just slide it out in one piece much easier than messing about trying to remove it from the bumper bar on the car!!
although i prefer to leave headlights in and just unbolt the 4 bolts going through the chassis legs that way you just slide it out in one piece much easier than messing about trying to remove it from the bumper bar on the car!!
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM