jdm sti hid not working(help)
Thread Starter
Scooby Newbie
Joined: Mar 2006
Posts: 10
Likes: 0
From: bottom end of wales
jdm sti hid not working(help)
jumped in the car tonight and found the lights a bit poor, jumped out and the hid on drivers side not working.
took it back home checked the fuses and relays next to battery and they seem to be ok(unless there is more else where
). scratched me head a bit then swapped the light unit to the other side and it worked so it's not the bulb, by now really scratchin me bonce
. dont really know to much about this kind of light, anybody got any ideas.
much appreciated andy
took it back home checked the fuses and relays next to battery and they seem to be ok(unless there is more else where
). scratched me head a bit then swapped the light unit to the other side and it worked so it's not the bulb, by now really scratchin me bonce . dont really know to much about this kind of light, anybody got any ideas.much appreciated andy
When you say "swapped the light unit", what, exactlty, did you swap?
An HID unit consists of a reflector and lens, (what most people call the "light"), a burner, (what people call the "bulb"), a ballast, which makes the arc in the burner strike, and associated wiring, including, or not including, relays and fuses, depending on kit.
If you swapped the burner, and it worked on the other side, and you've checked wiring etc, then I'd suspect the ballast.
This IS NOT something I'd recommend trying to self-test, you can get massive shocks off one!
If you've checked the wiring etc and are satisfied, take it to an auto electrics place.
Alcazar
BTW: when this happened to me, with my Hella 1000ff HIDs, it turned out to be the relay, rusted solid inside
Repair was £5, all relays now sealed with Araldite!
Power was getting TO it, but not coming OUT of it!
An HID unit consists of a reflector and lens, (what most people call the "light"), a burner, (what people call the "bulb"), a ballast, which makes the arc in the burner strike, and associated wiring, including, or not including, relays and fuses, depending on kit.
If you swapped the burner, and it worked on the other side, and you've checked wiring etc, then I'd suspect the ballast.
This IS NOT something I'd recommend trying to self-test, you can get massive shocks off one!
If you've checked the wiring etc and are satisfied, take it to an auto electrics place.
Alcazar
BTW: when this happened to me, with my Hella 1000ff HIDs, it turned out to be the relay, rusted solid inside
Repair was £5, all relays now sealed with Araldite!Power was getting TO it, but not coming OUT of it!
Thread Starter
Scooby Newbie
Joined: Mar 2006
Posts: 10
Likes: 0
From: bottom end of wales
i swapped the whole headlamp assembly from one side to the other. so it is'nt the burner. i have recently taken the bumper off and its since then it has happened.
looks like its coming back off just to make sure i havent disturbed
any wiring, cant see that i could of though
thanks for info
looks like its coming back off just to make sure i havent disturbed
any wiring, cant see that i could of though
thanks for info
Thread
Thread Starter
Forum
Replies
Last Post
