Would STI 02-04 aftermarket exhaust headers fit a uk98 car? they look the same....I think the difference is on the other side of the turbo (dp back)

Rgds, Bryan

 

YES!

Russell

 

Thought so, cheers.

Bryan

 

your can needs a boss for the o2 sensor in the up pipe and the 98 car does not have one .... chris

 

Plug is M18 X 1.5 AFAIK - most of the Aftermarket headers come with one as the WRX has a CAT in the U/Pipe and the STI doesn't. so they need to cater for both!

Russell

 

Think missunderstanding here....

The headers are to go on the 98uk car..

Your car has the 02 Sensor in the downpipe, the headers from the 02-04 car will poss have a boss in the up pipe already as them particular years have a sensor in the up pipe. As Russel states you will need a Lambda Bung.

Rob

 

Cheers chaps, egt sensor ....... do I put this in the up-pipe or in the down pipe where the lambda sensor goes?

Rgds, Bryan

 

Uppipe or collector boss, the temperature drops across the turbo so the downpipe location would not be ideal

Andy

 

Changing the subject slightly - what injectors fit in the 98 fuel rail, would I need a fitting kit?


Bryan

 

Most aftermarket injectors need a fitting kit for the Ph1 rails, you will find injectors and adaptors in scoobyshop

Andy

 

Rob

 

Rob, I'll be in touch

Bryan

Do you do injectors as well?

 

Who are you asking Bryan ?

Andy

(ps - yes)

 

Lol, i was just at Andy.. I dont supply them...

Andy does however, so no need to look any further

Rob

 

Hi Andy,

I had a few beers yesterday hence the confusion,

I will require 550's + fitting kits for a 98 uk fuel rail, one of your standard tdo5 fe and a apexi fc the car is at Barretts at the mo having the engine rebuilt and should be ready the end of feb this giving me time to do some OT and buy all the required bits.

Can you PM me a price on the above, where abouts are you based?

Rgds, Bryan