Notices
Drivetrain Gearbox, Diffs & Driveshafts etc

idle air control solenoid location

Thread Tools
 
Search this Thread
 
Old Aug 16, 2004 | 10:31 AM
  #1  
TJG's Avatar
TJG
Thread Starter
Scooby Regular
 
Joined: Dec 2003
Posts: 33
Likes: 0
Default idle air control solenoid location

Can anyone help me out with the location of the idle air control solenoid on a MY98 UK Turbo please? I've got ECU code 24, which points to this - I'm just not sure exactly where/what it is.

Any help would be greatly appreciated.
Reply
Old Aug 16, 2004 | 09:44 PM
  #2  
Scott.T's Avatar
Scott.T
Scooby Regular
iTrader: (2)
 
Joined: Feb 2000
Posts: 6,181
Likes: 1
From: East Sussex
Default

Mounted on the top right of the intake manifol, slightly to the right of the dumpvalve.
From memory it's a white plastic thing which is mounted using 2 small screws in slotted holes and has a 2 or 4 wire connector on it.

It works on magnetism, so may need a tug to pull off.......
Reply
Old Aug 17, 2004 | 10:21 AM
  #3  
TJG's Avatar
TJG
Thread Starter
Scooby Regular
 
Joined: Dec 2003
Posts: 33
Likes: 0
Default

Nice one. Thanks for your help.
Reply
Old Aug 17, 2004 | 07:23 PM
  #4  
GREEN SCOOBY's Avatar
GREEN SCOOBY
Scooby Regular
 
Joined: Nov 2000
Posts: 935
Likes: 0
Default

Hi TJG. Are you getting or had any problems with the car ideling badly? The thing is i have an idle problem and I think that the idle valve is the problem.This thing has been cleaned several times recently and it makes no difference at all. It seems they are rare to go wrong though and the problem with the idle tends to always be a maf problem but I have changed the maf and still have the problem. The only other thing it could be for me is maybe a lamda sensor. Good luck mate.
Reply
Old Aug 17, 2004 | 08:40 PM
  #5  
Scott.T's Avatar
Scott.T
Scooby Regular
iTrader: (2)
 
Joined: Feb 2000
Posts: 6,181
Likes: 1
From: East Sussex
Default

disconnect the lambda, see if that helps. You can drive without the lamda connected as it takes ages to throw up the check engine light (code 31).
Reply
Old Aug 17, 2004 | 11:59 PM
  #6  
GREEN SCOOBY's Avatar
GREEN SCOOBY
Scooby Regular
 
Joined: Nov 2000
Posts: 935
Likes: 0
Default

cheers Scott.t i tried that tonight going home and it made no difference, But does it make a difference if you start the car with the lamda disconnected or disconnect after the engine has been run for a bit?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
Nov 4, 2021 07:12 PM
Sam Witwicky
Engine Management and ECU Remapping
17
Nov 13, 2015 10:49 AM
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM
mistermexican
General Technical
2
Oct 1, 2015 04:30 PM




All times are GMT +1. The time now is 09:07 AM.