Getting CEL code 32 and crap idling so I've ordered the 3 wire Bosch Lambda sensor (£49 +vat). Anyone fitted one of these? - just wondering if it's obvious how to wire it up (believe I have to replace the connecting plug it comes with and wire it to the original plug).

p.s. STi v3 (3 wire lambda in downpipe)

Thanks

Kevin.

 

Recent thread that may be of use. Yes, you'll need to cut the OEM connector off the old lambda sensor, and crimp it onto the new one (solder won't work very well).

 

Although not sure if yours is Zirconia or Titania. You'll know off the colour of the wires...

Zirconia

Colour Connection
Black - Signal
White - Heater
White - Heater





Titania

Colour Connection
Black Ref. (out)
Red Ref. (in) & Heater (+)
White Heater (-)

 

I have exactly the same problem with mine, Subaru Quoted £120 + Vat for a replacement.
can you tell me you bought yours from

Cheers

Dave

 

Any Motor Factor (use Yell to find one local to you), or Cats Direct...

 

I just located the local Bosch auto agent using their website. My local agent was in Aberdeen, phone call and the part was on it's way.

Judge, thanks, also what are the corresponding colours on the Bosch sensor.


Kevin.

 

Many thanks, does it matter which model of subaru you have or will the

11983

Universal Zirconia Sensor
Output 0.1 to 0.9 Volt

be ok for MY99 Uk Turbo

Thanks

Dave

 

Kevin,

They're on my post above!


Winders,

It does matter, yes. But I happen to know for sure that the 11983 Zirconia is the right part for your MY, because it's the same as mine (MY00).

 

Judge, part arrived, fitted, ECU reset and running as it should be now.

Thanks

Kevin.

 

Good stuff.

 

Judge

Just got mine, its a Universal Zirconia Sensor 3 wires as described in the thread. just to be exactly sure. my OEM part has exactly the same colours two white one black, can i presume that the black wire in the oem sensors is also the signal wire?.

Many thanks in advance

Winders

 

Yup.

 

Judge, think your user id will need to be change to "lambda guru"

 

 

Anyone know which is the replacement for a '94 Twin Turbo Legacy?? Is it the same as the Impreza Turbo?