Bosch Lambda Sensor wiring
#1
Bosch Lambda Sensor wiring
Getting CEL code 32 and crap idling so I've ordered the 3 wire Bosch Lambda sensor (£49 +vat). Anyone fitted one of these? - just wondering if it's obvious how to wire it up (believe I have to replace the connecting plug it comes with and wire it to the original plug).
p.s. STi v3 (3 wire lambda in downpipe)
Thanks
Kevin.
p.s. STi v3 (3 wire lambda in downpipe)
Thanks
Kevin.
#2
Scooby Regular
Join Date: Jul 2003
Location: Out of darkness cometh light
Posts: 1,457
Likes: 0
Received 0 Likes
on
0 Posts
Recent thread that may be of use. Yes, you'll need to cut the OEM connector off the old lambda sensor, and crimp it onto the new one (solder won't work very well).
#3
Scooby Regular
Join Date: Jul 2003
Location: Out of darkness cometh light
Posts: 1,457
Likes: 0
Received 0 Likes
on
0 Posts
Although not sure if yours is Zirconia or Titania. You'll know off the colour of the wires...
Zirconia
Colour Connection
Black - Signal
White - Heater
White - Heater
Titania
Colour Connection
Black Ref. (out)
Red Ref. (in) & Heater (+)
White Heater (-)
Zirconia
Colour Connection
Black - Signal
White - Heater
White - Heater
Titania
Colour Connection
Black Ref. (out)
Red Ref. (in) & Heater (+)
White Heater (-)
#5
Scooby Regular
Join Date: Jul 2003
Location: Out of darkness cometh light
Posts: 1,457
Likes: 0
Received 0 Likes
on
0 Posts
#6
I just located the local Bosch auto agent using their website. My local agent was in Aberdeen, phone call and the part was on it's way.
Judge, thanks, also what are the corresponding colours on the Bosch sensor.
Kevin.
Judge, thanks, also what are the corresponding colours on the Bosch sensor.
Kevin.
Last edited by Kevin Groat; 16 July 2004 at 01:00 PM.
Trending Topics
#8
Scooby Regular
Join Date: Jul 2003
Location: Out of darkness cometh light
Posts: 1,457
Likes: 0
Received 0 Likes
on
0 Posts
Kevin,
They're on my post above!
Winders,
It does matter, yes. But I happen to know for sure that the 11983 Zirconia is the right part for your MY, because it's the same as mine (MY00).
They're on my post above!
Winders,
It does matter, yes. But I happen to know for sure that the 11983 Zirconia is the right part for your MY, because it's the same as mine (MY00).
#11
Judge
Just got mine, its a Universal Zirconia Sensor 3 wires as described in the thread. just to be exactly sure. my OEM part has exactly the same colours two white one black, can i presume that the black wire in the oem sensors is also the signal wire?.
Many thanks in advance
Winders
Just got mine, its a Universal Zirconia Sensor 3 wires as described in the thread. just to be exactly sure. my OEM part has exactly the same colours two white one black, can i presume that the black wire in the oem sensors is also the signal wire?.
Many thanks in advance
Winders
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM