I just buy a AFC and i want some help to setup the unit.Anyone with experience with that?

 

I'd say beware that you do not alter the ignition timing too much by adjusting the airflow signal !
The airflow signal is not only used for setting fuel input but also the ignition advance.

Andy

 

Thanks Andy.F
I am trying to find some older post for setuping but i cant find anything.

 

I have one in my car...what do you need to know?

 

Hi little'un.
I am trying too find some basic info to setup the unit.
I take the AFC from a friend and i only have instruction for installation.

 

have you got this ???

http://www.apexi-usa.com/productdocu...s_safc_ins.pdf

 

Great for start. Thanks
Any other advice ?

 

Just really what AndyF says above...Dont alter MAF reading too much because it also alters Ignition timing!

 

Skydiver - I'd recommend you get an uprated fuel pump and adjustable regulator, then you can increase/decrease the fuel pressure as required then adjust the MAF signal to achieve the correct timing via the S-AFC

Andy

 

Hi Andy.F
I have a walbro 250 fuel pump and i am waiting for a sard regulator and injectors from type RA.
Thanks