TDO5 turbo
I beleve a few people have managed 350bhp with a TD05 and some a little more, the 05/06 should be good for closer to 450. I don't know how many people have actually run them up to this, the most i've heard so far is 415....... Except someone with a 2.5 but i'm not counting that 
IIRC 20g is the size of the compressor wheel, standard '05 being 16g and 05/06 being 20g
Dave

IIRC 20g is the size of the compressor wheel, standard '05 being 16g and 05/06 being 20g
Dave
i made 419 too on a TD05/06 20G at 1.35 bar boost.
Alan Bell made over 370 on a standard TD05 at 1.5 bar boost.
Rich Wild has made over 380 with a front entry TD05, not sure on boost.
Alan Bell made over 370 on a standard TD05 at 1.5 bar boost.
Rich Wild has made over 380 with a front entry TD05, not sure on boost.
Originally Posted by AndrewC
Rich Wild was about 1.35 bar.
TD05 will only hold about that to the redline, and then you need an unrestricted inlet/IC/exhaust.
Andrew...
TD05 will only hold about that to the redline, and then you need an unrestricted inlet/IC/exhaust.
Andrew...
how is the lag compared to the TD04-13G?
I am currently using the TD04-13G (from a MY03) on my 1.6L engine (4age) producing about 250-260bhp at 1-1.1bar at 6200rpm. Is there more to be squeezed out from the TD04?
There is a TD05 being offered cheaply and I am thinking of using the TD05 but is afraid of incurring even more lag on my smallish engine.
her shann
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post




