Notices
Drivetrain Gearbox, Diffs & Driveshafts etc

my93 holding back ?!?!

Thread Tools
 
Search this Thread
 
Old Feb 14, 2001 | 11:07 PM
  #1  
DAVE26's Avatar
DAVE26
Thread Starter
Scooby Regular
 
Joined: Aug 2000
Posts: 2,060
Likes: 0
From: Leeds
Red face

i was driving along in 2nd gear the other night @ 2500revs and noticed the car seemed to be holding back as tho it wanted to stop
when i pushed the accelerator to the floor it picked up, so i took it on the motorway and was giving it some in 4th then into 5th, i could feel it holding out on me again, i pushed it a bit more and the car jerked on me.

its done this a few times on me b4

any ideas guys & gals ????
Reply
Old Feb 15, 2001 | 02:53 PM
  #2  
MarkF's Avatar
MarkF
Scooby Regular
 
Joined: Jan 1999
Posts: 490
Likes: 0
Post

Dave I sometimes get this on my 93 WRX. Do you get a whispy sound from the engine/turbo? It only seems to happen in phases though, ie once a fortnight. Seems that if you drive "sensibly" for a while then give it some the problem goes away.
Reply
Old Feb 15, 2001 | 06:32 PM
  #3  
scooby nutter's Avatar
scooby nutter
Scooby Regular
 
Joined: Dec 2000
Posts: 1,028
Likes: 0
Smile

Hi guys,
i use to get this problem quite a lot,3rd gear getting ready to overtake ,start overtake then the car would feel like it was towing a caravan for a second then jerk a little then it would pull cleanly.not turbo lag it felt like it was restricted for a split second then afterwards it would be ok.
I filled her up with a full tank of sul,reset the ecu and it has stopped this problem(so far)give it a try.mines a 92wrx
Reply
Old Feb 15, 2001 | 06:46 PM
  #4  
MarkF's Avatar
MarkF
Scooby Regular
 
Joined: Jan 1999
Posts: 490
Likes: 0
Post

Forgot to mention, Haven't had this problem since I fitted my Scoobysport downpipe.
Reply
Old Feb 15, 2001 | 07:58 PM
  #5  
DAVE26's Avatar
DAVE26
Thread Starter
Scooby Regular
 
Joined: Aug 2000
Posts: 2,060
Likes: 0
From: Leeds
Exclamation

hi guys

ive done all the exhaust mods and air filter
and am driving it on sul, i reset the ecu last week b4 i took it out 4 a clean out (thrashing up the motorway) but it still happens.
yes mark i do get the whispy noise from the turbine ?!?!?!?

thanxs again

daveout
Reply
Old Feb 15, 2001 | 09:56 PM
  #6  
pumpers's Avatar
pumpers
Scooby Regular
 
Joined: Dec 1999
Posts: 216
Likes: 0
Post

my93 wrx- similar problem, turned out to be detting on crap petrol and the ecu was reducing the boost- symptoms sound just like what my car was doing even when run on sul. scoobynutters description is almost an exact description of what was happening to my car.two broquets now in the tank, ecu reset and no further problems for over a year!!! don't know if this helps ( it cost me 300 quid to find this out!!!! ) pumpers
Reply
Old Feb 16, 2001 | 10:11 AM
  #7  
NDT's Avatar
NDT
Scooby Regular
 
Joined: Dec 2000
Posts: 316
Likes: 0
Post

I get this on my 98 STi4,but only at light throttle.
It's a total pain, and an ECU reset hasn't fixed it.
See the thread on engine surging - there are some mentions of hesitation there....

Shouldn't be det at light throttle though. Other people have mentioned dirty plugs, but mine were ok at the last service.

If anyone's got a quick fix it'd be appreciated!

Nick
Reply
Old Feb 16, 2001 | 02:03 PM
  #8  
RonaldoH's Avatar
RonaldoH
Scooby Regular
 
Joined: Aug 2000
Posts: 1,347
Likes: 0
Question

Try cleaning the wastegate solenoid?

Does it drop off boost at all?
Ronnie
Reply
Old Feb 16, 2001 | 02:05 PM
  #9  
NDT's Avatar
NDT
Scooby Regular
 
Joined: Dec 2000
Posts: 316
Likes: 0
Post

I'll try cleaning the solenoid at the weekend....
but where mine hesitates it would be off boost anyway.
Someone suggested throttle position sensor?
cheers
Nick
Reply
Old Feb 16, 2001 | 04:43 PM
  #10  
scooby nutter's Avatar
scooby nutter
Scooby Regular
 
Joined: Dec 2000
Posts: 1,028
Likes: 0
Thumbs up

RonaldoH
my 92wrx is only running 0.5 bar going full bore,i've had mixed responses to this question but some people say 0.9 bar others 1 bar+.what do you believe??
that was before when i had the problem with hesitation,i'll have to reinstall my boost gauge and see what the reading is now i run on Sul and a reset ecu..
Reply
Old Feb 16, 2001 | 07:56 PM
  #11  
pumpers's Avatar
pumpers
Scooby Regular
 
Joined: Dec 1999
Posts: 216
Likes: 0
Post

my93 wrx runs .85 bar boost and has done so since the broquets were installed-- 0.5 bar was about what mine did when the ecu was reducing the boost - scoobynutter, i've got a definite sense of deja-vu!! pumpers. ( getting dyno-ed sunday at well lane so i'll have more info re boost/bhp/torque curve in comparison to last year. only changes to car is broquets and hks exhaust and it was running like a donkey last time with scoobynuters symptoms!!!
Reply
Old Feb 16, 2001 | 11:44 PM
  #12  
DAVE26's Avatar
DAVE26
Thread Starter
Scooby Regular
 
Joined: Aug 2000
Posts: 2,060
Likes: 0
From: Leeds
Exclamation

i noticed when in 4th giving it some that my booste gauge was reading around .7bar and in 5th doing 142mph it read .9bar.
not sure what it should read ?!?!?!?

any1 know ?

also after some 4pots guys, any1 got any 4sale ? e-mail me pls
Reply
Old Feb 17, 2001 | 07:10 PM
  #13  
scooby nutter's Avatar
scooby nutter
Scooby Regular
 
Joined: Dec 2000
Posts: 1,028
Likes: 0
Smile

Thanks for the help guys.
Dont know what to for the best,I'll have to reconnect that boost gauge and see for myself.Cars getting traded in soon so i'll probably leave it if the gauge still shows 0.5 Bar!!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JimBowen
ICE
5
Jul 2, 2023 01:54 PM
PetrolHeadKid
Driving Dynamics
10
Oct 5, 2015 05:19 PM
Lillyart14
ScoobyNet General
24
Oct 1, 2015 01:29 AM
Sub-Subaru
General Technical
1
Sep 28, 2015 12:47 PM
lozgti1
Non Scooby Related
8
Sep 28, 2015 03:49 AM




All times are GMT +1. The time now is 09:00 AM.