Notices
Drivetrain Gearbox, Diffs & Driveshafts etc

P.E T-65 downpipe

Thread Tools
 
Search this Thread
 
Old Nov 22, 1999 | 07:20 PM
  #1  
mark245's Avatar
mark245
Thread Starter
Scooby Regular
 
Joined: Nov 1999
Posts: 224
Likes: 0
Post

I am looking to having one fitted to my UK my94, with a view to getting the turbo to spin up quicker and giving me peak torque lower down the rev range. Anyone with any experience of this part fitted, who would like to pass any comments would be greatly appreciated.
I believe the UK car has 2 cats? Has anyone passed an emissions test with 1 of the cats removed? Or is it a case of refitting at MOT time?
Also interested on views on increased noise in the cabin after having the downpipe fitted.

Thanks for any replies,
Mark
Reply
Old Nov 22, 1999 | 09:20 PM
  #2  
BPM's Avatar
BPM
Scooby Regular
 
Joined: Dec 1999
Posts: 232
Likes: 0
Thumbs up

BPM utlise one cat since the first few of the exhaust is the most crucial. We then place the cat straight after the donwpipe since the gases are still hot thus allowing the cat to benefit. We pass MOT tests with this design and extract excellent power figures.
Sti downpipe now available with dyno chart figures upon request.

If you have any further queries , please do not hesitate to email me or we can chat online with
ICQ (45940764)

Greg Nikolettos
BPM Marketing Division
Phone: (617) 3272-8885
Mobile: 0410 678 989
Fax: (617) 3218 8880
Reply
Old Nov 23, 1999 | 01:15 PM
  #3  
MorayMackenzie's Avatar
MorayMackenzie
Scooby Senior
 
Joined: Jun 1999
Posts: 3,410
Likes: 0
Post

Mark,

I have read a recent post that tells of a car (another Mike, I seem to recall) that managed to pass emmisions testing at an MOT station without any cats. Try searching for cat or de-cat/decat subjects.

Moray
Reply
Old Nov 23, 1999 | 03:24 PM
  #4  
mark245's Avatar
mark245
Thread Starter
Scooby Regular
 
Joined: Nov 1999
Posts: 224
Likes: 0
Post

Thanks Moray, I'll have a look as sugested,

regards,mark
Reply
Old Nov 23, 1999 | 05:11 PM
  #5  
mike_nunan's Avatar
mike_nunan
Scooby Regular
 
Joined: Mar 1999
Posts: 301
Likes: 0
Thumbs down

Hi Mark,

It was me, and a more recent (accurate?) test showed a failure on CO emission at idle. 0.5% is the MoT limit, and my car showed 0.8%. Dunno what the fast idle value was, but it would need to be 0.3% to pass. It passed on hydrocarbon emissions though (115ppm out of 200ppm maximum allowed).

-= mike =-
Reply
Old Nov 25, 1999 | 01:25 PM
  #6  
MorayMackenzie's Avatar
MorayMackenzie
Scooby Senior
 
Joined: Jun 1999
Posts: 3,410
Likes: 0
Post

Not that bad as news goes! The question was about mot with centre cat in place, so if
Mike's car managed to get that close to passing without any cat, it bodes well for a car with only the centre cat, assuming the ecu is correctly setup for a cat system.

Moray
Reply
Old Nov 25, 1999 | 07:03 PM
  #7  
RaymondH's Avatar
RaymondH
Scooby Regular
 
Joined: Jun 1999
Posts: 814
Likes: 0
Thumbs up

I recently had a Scoobysport downpipe fitted (MY98) and as a matter of interest the mechanic put my car on the gas analyser to see how it compared with MOT requirements - it passed with the centre cat still in place.
Reply
Old Nov 25, 1999 | 09:21 PM
  #8  
mark245's Avatar
mark245
Thread Starter
Scooby Regular
 
Joined: Nov 1999
Posts: 224
Likes: 0
Post

Thanks for all your replies . Seems like the centre cat may be sufficient. When my car was MOT'd, the tester was amazed at how quick acting and clean the cat was on my car, and thats 5 years old! hopefully one will be enough! I hear scoobysport have or are working on a downpipe where the cat can be replaced at MOT time ?

Many thanks , Mark
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tarling
Subaru Parts
10
Oct 19, 2015 07:58 PM
sedge69
Wanted
0
Oct 1, 2015 09:44 PM
ben.harris
General Technical
7
Sep 23, 2015 03:55 PM
Reshard1977
Subaru Parts
8
Sep 14, 2015 08:27 AM
Decayes
ScoobyNet General
5
Sep 11, 2015 07:47 PM




All times are GMT +1. The time now is 09:00 AM.