I made some inlet manifold spacers for my car and accidently made some spare so I have some for sale..

For some reason I made phase 1 and Phase 2..

made from 8mm Nylon 66.. properties are as follows...

Specific gravity 1·14 - 1·15
Water absorption 8·5% max. saturation
Tensile strength 70/90MPa
Flexural strength 2830MPa
Shear strength 66N/mm2
Hardness (shore D) 80-85
Melt point 255°C
Min. temp. -30°C
Thermal conductivity 0·23W/k.m
Flammability UL94V-2
Volume resistivity 1012-1015 Ohm. cm.
Dielectric strength 28-30kV/mm
Comparative tracking index 600V kA 3c

Price is £45 per pair.

I could arrange to find some thicker ones..

David

 

David, might seem like a dumb question but.... what are the advantages of using these spacers? Thanks

 

David!

You know I need a set of these!! Or have you forgotten about me?

I've actually ordered some of the material to get some made, but if yours are ready done, it'll save me a job.

Mail me with your address and I'll send you a cheque.

Cheers

Rich

 

no I hadnt forgot about you which is another reason why I was doing them... didnt have your email add at work though..

Drop me a mail.

David

 

wallis,

count me in for phase 1 please.

 

did you ever check to see if you had transferred that money? because I forgot to infact pat said the same.

David

[Edited by David_Wallis - 9/10/2003 3:11:55 PM]

[Edited by David_Wallis - 9/10/2003 3:12:10 PM]

 

david,

scrap the purchase.

I have changed my mind for reasons I will discuss with you!
email me with details again.

Money not gone to you but will send it now if you tell me the amount again.

 

will do.

David

 

YHM

 

David are these still available? Please let me know.

thanx.

[Edited by subhks - 9/21/2003 9:42:58 PM]

 

Can you tell me why i would want some inlet spacers? Is it something to do with bigger turbo inlet?

 

David,

I'd be interested in a set of these as my inlet manifold on my 94 WRX is off at the moment and would be easy to fit.

Do you still need to use a inlet gasket with them ?

I presume that the clearance to the bonnet is relatively uneffected ?

BW Mark A

 

David YHM

[Edited by RICH WILD - 9/11/2003 9:15:29 AM]

 

David,

When i sent the cheque last week im not sure if i gave you the address.... if not drop me a mail and i'll give it to you.

Cheers,

Tony.

[Edited by Tone Loc - 9/10/2003 4:23:30 PM]