I have just bought a Mental Blitz SS BOV for my 94 WRX.
Anyone fitted this device and has some pictures etc....

Cheers Eeza

 

If you look at my HKS one here it will fit similar to this..!










Dan

 

Dan, Have you painted your inlet manifold or is it jusy=t that clean If so wot did you use.

Cheers

Dean

 

Cheers Dan

So I just remove the little plastic jobby insitu and place my Blitz
bov in the same line, OK is there any Adjustments etc... does anyone know ?? Looked in the mags Revs etc and Import cars but not seen to many Blitz valves they favour the HKS super seq U have..

Cheers and thanks for the Pictures

Eeza

[Edited by ibm380d - 11/26/2002 12:52:36 PM]

 

DeanF,

My car was only imported in febuary of this year, that might explain why its clean.. no paint on there..!!

ibm380d,

If you have bought the vent to atmosphere dump valve then remember to put a bung in the pipe coming from the induction side of the inlet, where the standard recirculating dump valve would plumb back into the inlet, you can just see a jubilee clip on mine on the pipe that joins to the turbo inlet..!

Dan

 

OOPs

How do I tell the difference

 

yours will look like this...




Sometimes you can get the recirculating kit that takes the air dumped out of the outlet on the dump valve back into the inlet before the turbo.... Yours will most likly be vent to atmosphere....

Dan

 

Heres mine I guess I may need to change the flange pipe is is it the one you described earlier ie bung in one side and connect to other... I imagine the tube goes into the manifold


How do you add pictures I have one of mine ?

 

for adding pic go to:

http://bbs.turbosport.co.uk/upload.php

If you bought the kit for the impreza you should not have to alter how it fits..

Dan

 

Here's Mine I Ebay x JDM so has proba different flange although the ad did say Ej20 Impreza

http://upload.turbosport.co.uk/getpic2.asp?File=20021126173546939785.jpg

[Edited by ibm380d - 11/26/2002 5:43:24 PM]

 

Dan

 

You have got the best one..!!! the old style one like i used to have....there loud..!!

This was my old one:



I think the adapter will just about fit into the pipe that goes to the intercooler from looking at your pic... try fitting it like mine is...

Dan

 

Dan

Cheers for the help / Info

 

Dhorwich, Thats the same DV as I have I have a few questions you might be able to help with.

Can the older trumpet be swapped for the newer vent ??

Can these DV be 'serviced' ive heard of springs inside that can get tired ??

What sort of differences if any did you notice between the old and new DV ??

Ta heaps
J

[Edited by Jaay - 11/28/2002 1:46:03 AM]