Another Earthing Mod thread..... :o)
Thread Starter
Scooby Regular
Joined: Mar 2002
Posts: 4,338
Likes: 0
From: Fcon Power Writer
Had a great car day, firstly went over to halfords.. bought 4m of 8gauge earth wire and then went to local car spares and picked up a load of battery/earth connectors..
Before i fitted the cables i thought it would be an ideal day to paint my 4 pots, so i jacked up the car, supported with axel stands and gave the calipers a good clean with wire wool and brake cleaner.
After applying the first two coats of paint i made up the cables for the earths.
I have only run 3 cables, one from the batt. terminal to the right hand suspension top, one to the alternator via the manifold (bottom right inlet port) from batt. and one to the left hand suspension top from the batt. via the left hand side of the manifold...
I am going to run a cable to the ecu mounting tomorrow.
First impressions are that idle seems smoother and the car fired from freezing cold (not run at all today) as soon as i turned the key, the car used to turn over twice before firing up when cold..
After i had put the final coat on the calipers and replaced the wheels i decided to fit my plugs that have been sitting in my garage.
So all in all a good day for my scoob, nice shiny red calipers, earthing mod/improvements and a new set of 7b NGK's...
Thanks for reading people
Rob
p.s. cable and connectors cost £14.50
Before i fitted the cables i thought it would be an ideal day to paint my 4 pots, so i jacked up the car, supported with axel stands and gave the calipers a good clean with wire wool and brake cleaner.
After applying the first two coats of paint i made up the cables for the earths.
I have only run 3 cables, one from the batt. terminal to the right hand suspension top, one to the alternator via the manifold (bottom right inlet port) from batt. and one to the left hand suspension top from the batt. via the left hand side of the manifold...
I am going to run a cable to the ecu mounting tomorrow.
First impressions are that idle seems smoother and the car fired from freezing cold (not run at all today) as soon as i turned the key, the car used to turn over twice before firing up when cold..
After i had put the final coat on the calipers and replaced the wheels i decided to fit my plugs that have been sitting in my garage.
So all in all a good day for my scoob, nice shiny red calipers, earthing mod/improvements and a new set of 7b NGK's...
Thanks for reading people
Rob
p.s. cable and connectors cost £14.50
Thread Starter
Scooby Regular
Joined: Mar 2002
Posts: 4,338
Likes: 0
From: Fcon Power Writer
yeah, took the first plug out and it looked a bit red.. thought **** water in cylinder 
Then realised it is the octane booster.. bit of a shock at first.. all the other plugs are the same, not rust colour but still a shock at first.. all in all a top day!!!!!!!
Rob
just got the back brakes to paint, looks ok with just the fronts done but will look better with the back done as well..
Then realised it is the octane booster.. bit of a shock at first.. all the other plugs are the same, not rust colour but still a shock at first.. all in all a top day!!!!!!!
Rob
just got the back brakes to paint, looks ok with just the fronts done but will look better with the back done as well..
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM