Would I be right in saying that the stock fuel pressure regulator is the tiny little diaphragm regulator on the end of the fuel line? I think this is the thing that David Walllis changed for a pipe adapter on page 9 of the DIY FMC thread.

SO... If I want to fit an FSE regulator, I have to make/get a similar pipe adapter (not a mjor problem for me).

Paul

 

Yes, you need an adapter identical to this one. This adapter sits in place of the factory regulator and the same one can be fitted to both the GC/GF8 and New Age GDA/GDB fuel rails. Subaru changed the location of the regulator in th New Age fuel rails but still use the same model.

 

think the fse comes with one... but as said the regulator sits on the end of the rails.. It shows you how to make one aswell..

David

[Edited by David_Wallis - 6/13/2002 2:51:03 PM]

 

Yes FSE comes with a 90 degree adaptor plus hose plus a mounting bracket to fix it to the inlet manifold.
I found the passenger side close to the filter was ideal.

 

Just about see it here !