Evening,
Just a quick question as I'm struggling to find a straight answer. I have a 1997 UK Turbo 2000, can I fit either a 225mm 230mm clutch or would I have to change the flywheel as well to fit the 230mm clutch?
The engine is currently standard but I do intend to tune it later.
Also, is the WRX clutch the same size as the Turbo 2000 as standard?
Thanks,
Andy.

 

PM's responded to.

If it helps anybody else, you can fit either size assuming you skim or replace the flywheel. If you are trying to get away without skimming the flywheel you will need to remove the clutch to check the size as the garage/previous owner could of fitted either size, if 230mm fitted then either will go straight on, if 225mm fitted you will need to skim/replace flywheel to fit a 230mm or a 225mm will fit either way.

225mm Exedy Buy online: http://aztecperformance.com/clutches...4-5-speed.html

230mm Exedy Buy online: http://aztecperformance.com/clutches...lone-en-2.html

Lightweight flywheel highly recommended, one of the best mods I did to my Scoob