UK Terzo Project
#216
Scooby Regular
Thread Starter
iTrader: (8)
Join Date: Dec 2009
Posts: 783
Likes: 0
Received 0 Likes
on
0 Posts
Time for a little update, have spent a hell of a lot recently. Simtek has been sent off for firmware upgrade as well as have ordered the cable and software for the Time for a little update, have spent a hell of a lot recently. Simtek has been sent off for firmware upgrade as well as have ordered the cable and software for the ecu.
Parts I have recently brought are
hrc fuel pump
Millers 10w 50 oil
7b ngk spark plugs
Oil filter
GM 3 bar map sensor
Rota wheels
ANNNNND a sc46 billet turbo.
so far I have managed to change the oil, replace filter and plugs and fitted turbo.. few pictures
have had to remove my long studs to fit shorter studs as don't need wheel spacer any more at the front.
Have also ordered a compression tester so I can do a health check.
Parts I have recently brought are
hrc fuel pump
Millers 10w 50 oil
7b ngk spark plugs
Oil filter
GM 3 bar map sensor
Rota wheels
ANNNNND a sc46 billet turbo.
so far I have managed to change the oil, replace filter and plugs and fitted turbo.. few pictures
have had to remove my long studs to fit shorter studs as don't need wheel spacer any more at the front.
Have also ordered a compression tester so I can do a health check.
Last edited by Tyler 1; 13 April 2015 at 11:06 PM.
#217
Scooby Regular
iTrader: (6)
Join Date: May 2011
Location: Bringing up the rear of convoys since 2010!
Posts: 2,917
Likes: 0
Received 0 Likes
on
0 Posts
I remember seeing an O2C Blob front bumper on a classic and thinking it looked pretty damn good. Thought it brought the front end up to date. Hopefully once fitted you'll be happy with it.
Good to try new things
Good to try new things
#218
Scooby Regular
Thread Starter
iTrader: (8)
Join Date: Dec 2009
Posts: 783
Likes: 0
Received 0 Likes
on
0 Posts
Cheers bud, haven't been working on the bumper for quite some time as been sorting out other bits, at the moment don't want to go any further until I figure out what I am doing with the indercators
So will put the classic bumper back on to take it to get mapped
#219
Scooby Regular
iTrader: (1)
Join Date: May 2009
Location: nowhere fancy
Posts: 1,758
Likes: 0
Received 0 Likes
on
0 Posts
Absolutely fantastic thread and well done for getting stuck in but please for the love of god dont spoil it get rid of the version 8 bumper! Each to their own and all that but stevie wonder could see it looks all wrong lol ill buy fog covers off you when you see sense and get rid
#221
Scooby Regular
Thread Starter
iTrader: (8)
Join Date: Dec 2009
Posts: 783
Likes: 0
Received 0 Likes
on
0 Posts
Absolutely fantastic thread and well done for getting stuck in but please for the love of god dont spoil it get rid of the version 8 bumper! Each to their own and all that but stevie wonder could see it looks all wrong lol ill buy fog covers off you when you see sense and get rid
Cheers SJ. It's been a slow process fitting around work and 2 kids. Hoping to get mapped soon ish, but really want someone to spend some time when mapping. I know Duncan etc are good mappers I am not knocking but want someone to spend time ironing out the creases... so me and a mate are hoping to rent out a set of rollers and try and approach a mapper.
How's your beast coming along
Last edited by Tyler 1; 21 April 2015 at 04:29 PM.
#222
Scooby Regular
iTrader: (51)
If you get my drift mate.I will pm you or whatsapp as it is to indepth to get into on here.Your cars looking good mateI agrree with you about getting some quality mapping done,from a mapper that can spend time doing it,i think you will get better results from a rolling road map in conjunction with a real time street session to iron out the kinks.That turbo that you newly purchased is quality and should make some superb numbers once mapped properly.SJ.
#223
Scooby Regular
Thread Starter
iTrader: (8)
Join Date: Dec 2009
Posts: 783
Likes: 0
Received 0 Likes
on
0 Posts
If you get my drift mate.I will pm you or whatsapp as it is to indepth to get into on here.Your cars looking good mateI agrree with you about getting some quality mapping done,from a mapper that can spend time doing it,i think you will get better results from a rolling road map in conjunction with a real time street session to iron out the kinks.That turbo that you newly purchased is quality and should make some superb numbers once mapped properly.SJ.
Yeah really want to have a good session on the rollers and hopefully make good figures.. or even for it to just drive smoothly with a little kick. At the moment finding issues finding someone who will fit my tyres on my Rotas as they need to be stretched a little. Nothing major. Then I can out the car back on the floor. Will fit my hrc pump this Sunday and bead 4 joints on my intercooler pipes and give the car a once over then fingers crossed good to go.
#225
Scooby Regular
Thread Starter
iTrader: (8)
Join Date: Dec 2009
Posts: 783
Likes: 0
Received 0 Likes
on
0 Posts
Right well Sunday managed to fit my hrc 310lph fuel pump. So removed the walbro 255.
Started to tidy up the wires and was going to clean up the map sensor bracket and the damn bolt snapped so will have to drill that out at some point, was trying to figure out where to put the 3 bar map sensor.
Cheers bud. I am looking forward to seeing it done myself. Just hope i manage to finish it off half decent
Started to tidy up the wires and was going to clean up the map sensor bracket and the damn bolt snapped so will have to drill that out at some point, was trying to figure out where to put the 3 bar map sensor.
Cheers bud. I am looking forward to seeing it done myself. Just hope i manage to finish it off half decent
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Phil3822
General Technical
0
30 September 2015 06:29 PM