Race car look on a budget
27 December 2012, 04:37 PM
Scooby Regular
Thread Starter
Join Date: Jun 2009
Location: lowestoft
Posts: 946
Likes: 0
Some peeps have queried how am I running 368bhp with out a fmic reason is I am running the pace setup it's nice and stealth and no cutting needed :-),
I will be working on the engine side soon but it runs sweet as and no leaks so no need to touch yet.
27 December 2012, 05:09 PM
Scooby Regular
Join Date: Dec 2008
Location: Oxfordshire
Posts: 2,602
Likes: 0
Received 0 Likes
on
0 Posts
Loving the look matey, well done.
On a slightly different note, anyone now if anyone makes a rear diffuser in this style for a blob?
27 December 2012, 05:13 PM
Scooby Regular
Thread Starter
Join Date: Jun 2009
Location: lowestoft
Posts: 946
Likes: 0
Have a word with ABW mate.
27 December 2012, 05:16 PM
Scooby Regular
Thread Starter
Join Date: Jun 2009
Location: lowestoft
Posts: 946
Likes: 0
Just remember fitting one of these diffuser's you lose half your boot lol, And the cost of modifying you exhaust.
01 January 2013, 01:16 PM
Scooby Regular
Thread Starter
Join Date: Jun 2009
Location: lowestoft
Posts: 946
Likes: 0
Side skirts and splitter sprayed white now, Cars been lowered on some 18"s ready for the ABW arches being fitted on saturday :-).
02 January 2013, 08:03 PM
Scooby Regular
Join Date: May 2010
Location: basildon essex
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
really like this mate keep it up looks evil
02 January 2013, 09:23 PM
Scooby Regular
Join Date: Feb 2008
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Looking good howes, what did you make the stiffi's from? I've been looking a set for the version 6 spoiler for quite a while now with no luck, interested in making any more? I for one would buy a set!
Cheers Stephen
02 January 2013, 09:40 PM
Scooby Regular
Thread Starter
Join Date: Jun 2009
Location: lowestoft
Posts: 946
Likes: 0
Next up I am relocating the indicators and getting rid of the slits in the front bumper with some smaller air ducts to feed the brakes :-).
03 January 2013, 12:06 AM
Scooby Regular
Thread Starter
Join Date: Jun 2009
Location: lowestoft
Posts: 946
Likes: 0
Rear hockey sticks removed just got to polish up where they been.
03 January 2013, 04:38 AM
Scooby Regular
Join Date: Oct 2000
Location: cumbria
Posts: 6,802
Likes: 0
Great project
Enjoyed reading this
The rear end cut out looks amazing like the winner of the last 2 NBO s
And nice to see a DIY project instead of a cheque book one
Subscribed
03 January 2013, 08:57 AM
Scooby Regular
Thread Starter
Join Date: Jun 2009
Location: lowestoft
Posts: 946
Likes: 0
Thanx for the comments :-),
List and costs so far
Diffuser- free
Upper splitter- £20
Lower splitter with brackets and fixings- £38
18" wheels- sold mine for £300 paid £250
Spray and bits and bobs- £45
Roll cage 2x 8mtr pipe and brackets and fixings-£60
Bonnet pins- £12
Stiffis- free just my time
ABW arches and spacers, my biggest expense- £350
Last edited by howes124; 03 January 2013 at 08:59 AM .
03 January 2013, 01:11 PM
Scooby Regular
Thread Starter
Join Date: Jun 2009
Location: lowestoft
Posts: 946
Likes: 0
Go nicely with my wheels, Brand new in the box £20 :-)
07 January 2013, 07:13 AM
Scooby Regular
Thread Starter
Join Date: Jun 2009
Location: lowestoft
Posts: 946
Likes: 0
Few little jobs done this weekend made another vent hole in bonnet and custom under tray pic of which I will post up later,
13 January 2013, 05:23 PM
Scooby Regular
Thread Starter
Join Date: Jun 2009
Location: lowestoft
Posts: 946
Likes: 0
Arches fitted + spacers so nice and fat lol.
Last edited by howes124; 14 January 2013 at 03:26 AM .
13 January 2013, 06:40 PM
Scooby Regular
Join Date: Sep 2009
Location: Buxton / Norfolk
Posts: 1,395
Likes: 0
Received 0 Likes
on
0 Posts
Looks spot on, be carefull with them nuts though as a set i had twisted without much pressure being put on them.
13 January 2013, 07:10 PM
Scooby Regular
Join Date: Apr 2010
Location: www.slowboy-racing.co.uk
Posts: 10,523
Like it alot matey and rear diffuser looking good there
Jura
14 January 2013, 03:24 AM
Scooby Regular
Thread Starter
Join Date: Jun 2009
Location: lowestoft
Posts: 946
Likes: 0
Front vent finished under tray to suck the hot air out being cast as we speak :-)
14 January 2013, 03:29 AM
Scooby Regular
Thread Starter
Join Date: Jun 2009
Location: lowestoft
Posts: 946
Likes: 0
Quote:
Originally Posted by
95turbowagon
Looks spot on, be carefull with them nuts though as a set i had twisted without much pressure being put on them.
ABW own ones and at £200 I hope they don't lol.
22 January 2013, 04:26 PM
Scooby Regular
Join Date: Jul 2011
Location: Colchester
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Looks good mate. Cant believe this is the same car
24 January 2013, 02:34 AM
Scooby Regular
Thread Starter
Join Date: Jun 2009
Location: lowestoft
Posts: 946
Likes: 0
Yes m8 it has changed slightly lol, Car off the road now for a bit till I get my tein coilovers with edfc :-).
24 January 2013, 05:27 AM
Scooby Regular
Join Date: Apr 2003
Location: Curlew FPSO
Posts: 2,771
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by
howes124
ABW own ones and at £200 I hope they don't lol.
Think he meant the alloy wheel nuts
24 January 2013, 09:28 AM
Scooby Regular
Join Date: Sep 2009
Location: Buxton / Norfolk
Posts: 1,395
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by
Ciaran
Think he meant the alloy wheel nuts
Correct, the D1 wheel nuts are a bit flimsy.
24 January 2013, 09:29 AM
Scooby Regular
Thread Starter
Join Date: Jun 2009
Location: lowestoft
Posts: 946
Likes: 0
Quote:
Originally Posted by
Ciaran
Think he meant the alloy wheel nuts
Oppps lol, Once I get the new wheels fitted I will be doing away with the spacers :-).
24 January 2013, 09:50 PM
Scooby Regular
Join Date: Jan 2008
Location: Lancashire (Not Dundee Anymore)
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
Looks great! Was hoping you were still planning on running wide wheels as spaced out wheels never look quite as good as wide ones!
24 January 2013, 09:53 PM
Scooby Regular
Thread Starter
Join Date: Jun 2009
Location: lowestoft
Posts: 946
Likes: 0
Quote:
Originally Posted by
JamesDundee
Looks great! Was hoping you were still planning on running wide wheels as spaced out wheels never look quite as good as wide ones!
Am going to be running the wider wheels :-), Just using spacers so I still have use of the car.
27 January 2013, 04:46 PM
Scooby Regular
Join Date: Jan 2012
Location: jersey
Posts: 1,421
Likes: 0
Received 0 Likes
on
0 Posts
very interested if you do offer those front splitters for sale or even the stiffis !! car looks sweet am going to have a go at the abw rear diffuser also looks sweet.. no one seems to do those wing stiffis for the classic model those look good quality.
27 January 2013, 04:48 PM
Scooby Regular
Join Date: Jan 2012
Location: jersey
Posts: 1,421
Likes: 0
Received 0 Likes
on
0 Posts
btw I also have those exact wheel nuts from d2 in blue and twisted one when fitting so I need to get a new set mind you at £20 not too big a deal just make sure it is all the way on the nut before unwinding as they twist real easy..
27 January 2013, 07:27 PM
Scooby Regular
Thread Starter
Join Date: Jun 2009
Location: lowestoft
Posts: 946
Likes: 0
Change of job soon means I will have more time on my hands, Will keep you posted on the splitter, stiffi score :-).
27 January 2013, 07:30 PM
Scooby Regular
Join Date: Oct 2010
Location: breaking 420 bhp high spec classic
Posts: 1,735
Likes: 0
Received 0 Likes
on
0 Posts
Looks good those arches look like the thinner ones they look good not to wide
28 January 2013, 04:06 PM
Scooby Regular
Thread Starter
Join Date: Jun 2009
Location: lowestoft
Posts: 946
Likes: 0
Well the cars gone in to storage for a month or so now bit gutted just won't to drive it :-(,
All the suspension has been removed so will give me a chance to have a tidy up ,
As its of the road will do some chassis work already have a h-brace, whiteline strut braces f/r, 22mm anti roll bars, and saving for some tein coilovers "super street" with edfc, And at bargain prices pays to wait and keep your eyes peeled :-).
Last edited by howes124; 28 January 2013 at 04:10 PM .