My Classic scoob...
#241
Its getting there!
Had a couple of issues last night the slave cylinder has shat its self so that now needs replacing and obviously loosing the nut off the lower arm is a ballache.
Tonight/tomorrow morning I am going to look at getting the turbo built up andd fitted, hopefully I can get a slave cylinder today too and get that swapped over tomorrow and the box filled with oil!
Had a couple of issues last night the slave cylinder has shat its self so that now needs replacing and obviously loosing the nut off the lower arm is a ballache.
Tonight/tomorrow morning I am going to look at getting the turbo built up andd fitted, hopefully I can get a slave cylinder today too and get that swapped over tomorrow and the box filled with oil!
Waiting to go home and hoping my spacers have arrived
#245
Yeah definitely. Got a good go at it today, it went really well!
Took 3hrs or so to fit the turbo, service the engine (spark plugs etc) complete the exhaust and put all the ancillaries back.
All that is left to do is change the oil and filter, prime the turbo, and change the slave cylinder
Took 3hrs or so to fit the turbo, service the engine (spark plugs etc) complete the exhaust and put all the ancillaries back.
All that is left to do is change the oil and filter, prime the turbo, and change the slave cylinder
#250
Picked this up today for the workshop -
I have the race battery in the boot, but if I need to carry this everywhere I go I don't really see what benefit it gives me over a normal sized battery! Ho-hum!
Parts should be in to enable remap and mot tomorrow fingers crossed! Really getting some progress now!
I have the race battery in the boot, but if I need to carry this everywhere I go I don't really see what benefit it gives me over a normal sized battery! Ho-hum!
Parts should be in to enable remap and mot tomorrow fingers crossed! Really getting some progress now!
#251
Well today I'm hoping that enginetuner come up trumps with a new nut for the lower arm.
*fingers crossed* I'm sure they will!
The slave cylinder should be here today too. Also will be picking up my gearbox oil and new oil filter today.
I also hope cdf come up trumps with the wheel adapters I ordered! I can't wait to try the new shoes on!
*fingers crossed* I'm sure they will!
The slave cylinder should be here today too. Also will be picking up my gearbox oil and new oil filter today.
I also hope cdf come up trumps with the wheel adapters I ordered! I can't wait to try the new shoes on!
#252
Got the last bits required to get the engine side of things finished.
5ltrs of redline shock proof will be here tomorrow before 12 for my gearbox, the spacers from cdf are due tomorrow and the mot is booked in for 15.30!
So we are getting close now!
Big thanks to Alan at engine tuner for sourcing the last few bits for me. See you wednesday for my remap!
#255
Just got back from the workshop, not feeling very confident about this right now.
I've got all the underneath suspension stuff bolted up.
I've got the oil changed
The clutch cylinder in and bled (I think, its impossible by yourself and I just don't know!)
So tomorrow all I need to do is prime the turb o and fire her up, check the clutch and fill the gearbox with oil.
Then mot etc.
Just praying it all goes to plan
I've got all the underneath suspension stuff bolted up.
I've got the oil changed
The clutch cylinder in and bled (I think, its impossible by yourself and I just don't know!)
So tomorrow all I need to do is prime the turb o and fire her up, check the clutch and fill the gearbox with oil.
Then mot etc.
Just praying it all goes to plan
#257
I hope so. Really worried about it to be honest. But the bulk of the work is done, hoping my box oil arrives early, I will go up to the workshop at 5am before work and get a bit of tidying and what not done I think
Does anyone other than the 4 regulars on my thread actually read this? Haha
Does anyone other than the 4 regulars on my thread actually read this? Haha
#260
Scooby Regular
iTrader: (3)
I hope so. Really worried about it to be honest. But the bulk of the work is done, hoping my box oil arrives early, I will go up to the workshop at 5am before work and get a bit of tidying and what not done I think
Does anyone other than the 4 regulars on my thread actually read this? Haha
Does anyone other than the 4 regulars on my thread actually read this? Haha
#262
Thanks guys.
Yeah very crap news.
UkFail are looking for the package over night at all depots apparently. Opie oils have been top notch and sent another package out on a pre 12 delivery with fed ex for tomorrow. So fingers crossed I should be able to get an mot tomoorrow if the garage can fit me in!
Yeah very crap news.
UkFail are looking for the package over night at all depots apparently. Opie oils have been top notch and sent another package out on a pre 12 delivery with fed ex for tomorrow. So fingers crossed I should be able to get an mot tomoorrow if the garage can fit me in!
#263
Unmapped 12.4s @ 105
iTrader: (29)
Join Date: Apr 2005
Location: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Posts: 11,776
Likes: 0
Received 4 Likes
on
4 Posts
Provided it arrives at your local Fed Ex branch tomorrow, you'll probably have it well before 12 mate, provided they work the same as the branch I'm sub-contracted to.
Newcastle branch use the Express(International collection) drivers to do premium deliveries, hopefully your local one is the same.
Newcastle branch use the Express(International collection) drivers to do premium deliveries, hopefully your local one is the same.
#264
Provided it arrives at your local Fed Ex branch tomorrow, you'll probably have it well before 12 mate, provided they work the same as the branch I'm sub-contracted to.
Newcastle branch use the Express(International collection) drivers to do premium deliveries, hopefully your local one is the same.
Newcastle branch use the Express(International collection) drivers to do premium deliveries, hopefully your local one is the same.
Have never been subject to such **** poor customer service, it seems like the MD will be giving the 2 staff I dealt with today numerous bollockings!
#267
The gearbox oil arrived at 9.47 this morning. After been promised at 7am it would be there before 9....
Fedex turned up at 9.51 with the other lot of oil, sent yesterday at 3pm... Fecking ridiculous how ukfail can get it so wrong!
Either way, I have got the bits I need. I have sneaked home for lunch and done the gearbox oil, topped up engine oil and coolant and cranked the engine over to check for leaks and prime the turbo etc. I have a small fuel leak so I need some fuel hose but once I have done that I can start it up...
Don't know wether to book an mot for tomorrow or not. Don't want to let them down again!
#268
Today has been a day of mixed emotions, although the over riding feeling right now is despondence!
The day started off with mot, tax andd insurance, all was going well! Flew through the mot and everything was sorted quickly.
I then took the car to engine tuner.
Car couldn't go on the rollers as the battery was dead, so another 100quid down and a new battery wwas installed.
My water temp gauge packed up on the way in.
So not feeling so great Martyn got it in on the rollers and I hung around to watch, as per usual top service and really helpful!
First run on normal tesco 99 saw 497hp (it only pulled 485 on tesco 99 on the last turbo)
After some more tweaking with the mpa Martyn eeked out 516.7hp on straight pump fuel! Finally cleared 500 on pump fuel, over the moon!
We didn't do another meth map but I expect similar improvments with that too
Was over the moon with the car and started to drive home, the oil temp gauge started rising and kept rising, saw 135degs when I pulled in and killed the car, the car has just been recovered to engine tuner and I hope Its the gauge at fault!
Bleurgh!
The day started off with mot, tax andd insurance, all was going well! Flew through the mot and everything was sorted quickly.
I then took the car to engine tuner.
Car couldn't go on the rollers as the battery was dead, so another 100quid down and a new battery wwas installed.
My water temp gauge packed up on the way in.
So not feeling so great Martyn got it in on the rollers and I hung around to watch, as per usual top service and really helpful!
First run on normal tesco 99 saw 497hp (it only pulled 485 on tesco 99 on the last turbo)
After some more tweaking with the mpa Martyn eeked out 516.7hp on straight pump fuel! Finally cleared 500 on pump fuel, over the moon!
We didn't do another meth map but I expect similar improvments with that too
Was over the moon with the car and started to drive home, the oil temp gauge started rising and kept rising, saw 135degs when I pulled in and killed the car, the car has just been recovered to engine tuner and I hope Its the gauge at fault!
Bleurgh!