Notices
ScoobyNet General General Subaru Discussion
Sponsored by:
Sponsored by:

ScoobyNet EJ20/EJ22//EJ25 ** ON Standard Internals ** LEADERBOARD

Thread Tools
 
Search this Thread
 
Old 10 June 2015, 11:46 AM
  #361  
CutMasterT
Scooby Regular
iTrader: (2)
 
CutMasterT's Avatar
 
Join Date: Jan 2014
Location: Now in Thanet
Posts: 806
Likes: 0
Received 0 Likes on 0 Posts
Default

Need to get mine on a dyno, see what I can get out of my SC42
Old 10 June 2015, 03:19 PM
  #362  
joz8968
Scooby Regular
iTrader: (13)
 
joz8968's Avatar
 
Join Date: Aug 2006
Location: Leicester
Posts: 23,761
Likes: 0
Received 8 Likes on 6 Posts
Default

Originally Posted by CutMasterT
Need to get mine on a dyno, see what I can get out of my SC42
Every chance of making "The 400 Club" (supp. mods permitting). And then some.

Old 10 June 2015, 07:48 PM
  #363  
davidgoodwin1803
Scooby Regular
 
davidgoodwin1803's Avatar
 
Join Date: Feb 2008
Location: Sandford - Dorset
Posts: 201
Likes: 0
Received 0 Likes on 0 Posts
Default

I will try and dig out the graph that i had printed.

Like i said, the torque wasn't huge, around 420ft-lb but it pulls very well ;-)
Old 10 June 2015, 08:32 PM
  #364  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

Very nice peak power for the boost.

It's the area under the curve that's important for a road car though imo.

Seeing the full torque and power graph would be good. However, using my powers of deduction (lol), it appears to be quite laggy pulling 1 bar @ 4100rpm. Which in reality would explain the peak power figure being attained with only 1.5bar on pump..... it's a large core.
Old 10 June 2015, 09:21 PM
  #365  
davidgoodwin1803
Scooby Regular
 
davidgoodwin1803's Avatar
 
Join Date: Feb 2008
Location: Sandford - Dorset
Posts: 201
Likes: 0
Received 0 Likes on 0 Posts
Default

Found it.


Old 10 June 2015, 09:49 PM
  #366  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

Thanks for showing the graph.

That's pretty laggy for a road car..... would be good on track though.
Old 10 June 2015, 09:58 PM
  #367  
davidgoodwin1803
Scooby Regular
 
davidgoodwin1803's Avatar
 
Join Date: Feb 2008
Location: Sandford - Dorset
Posts: 201
Likes: 0
Received 0 Likes on 0 Posts
Default

To be honest the car only gets used once or twice a week.

Yes it has lag but if i want a play then i just drop it down and give it beans

simples
Old 10 June 2015, 10:01 PM
  #368  
veerinder9
Scooby Regular
iTrader: (1)
 
veerinder9's Avatar
 
Join Date: Jul 2012
Location: wolverhampton
Posts: 1,743
Likes: 0
Received 0 Likes on 0 Posts
Default

Lag? What's lag?
Old 10 June 2015, 11:54 PM
  #369  
Dubzy
Scooby Regular
iTrader: (4)
 
Dubzy's Avatar
 
Join Date: May 2009
Location: In the middle
Posts: 979
Likes: 0
Received 3 Likes on 3 Posts
Default

Thought i would add mine to the list although i wont be on standard internals for too much longer as i have 2.35 build on the go.

.

.
.

1) WhiteWagonMan - 505 bhp / 456 lbft - 1998 v5 STi(JDM v8 STi EJ20 bottom end) SC42 Billet / Afterburner Vortex R 3" zorst / Vpower + 20% meth / RCM induction setup / WR1 DCCD 6 speed box / GTspec headers / Harvey smith uppipe / FMIC / AP Racing brakes / Fuelab FPR / Walbro 300 pump / lateral 900cc injectors / syvecs ECU / mapped by mr syvecs himself Pat Herborn / Scoobyclinic RR and Road mapped / daily driven road car


2) DazDavies 504bhp / 2005 JDM STI LM450 Billet, FMIC, PE800cc injectors, Syvecs Mapped by JGM Vpower and 15% meth


3) Tazz01wrx - 503.9 bhp - 2003 JDM STI - Vpower + 20% meth / SC46 billet twin scroll / 3" Milltek exhaust / Ecutek 800cc injectors / RCM fuel pump and RCM fuel rails and parallel setup with fuel lab reg / fmic / RCM induction kit / Syvecs ecu / SFS intake hose / Inlet manifold thermal spacers / Mapped by JGM.


4) Shaun - 490bhp / 475lbft - 2006 JDM 2ltr STI, 20% Meth Mix, Billet LM450, BRD Induction Kit, SFS Intake Hose, Hybrid FMIC, 800cc inj, 3" Miltek and standard ECU mapped by Bob Rawle and power figures from SRR. Predominantly road use, but is used for everything and anything, including public track days and competition use.


5) Stevesbluewrx - 482 bhp / 448 lbft - 2002 STi (EJ20) / MDX321T (BILLET T71) 3" RCM Exhaust (With Sports cat) / Vpower + 18% Meth / CAIK / SimTek/AlcaTek ecu / 2 way FPR with parrellel set up / Lateral 850cc injectors / Surrey Rolling Road / Jollygreenmonster ( Daily Driver)


6) Dubzy - 481 bhp - 2004 STi (EJ20) / Md321T Billet Turbo / 3" Aps Decat / V-power + 20% Meth @ 1.7 bar / Alcatek / Sard 650cc Injectors / Rcm 340lph Fp / Rcm Induction Kit / Hdi Fmic / Wms Headers / Mapped by Mark @ TDR (Thwaites Developments)


7) Turboturner - 479.9 bhp / 470lbft - 2005 2ltr Euro STI, 20% Meth Mix, AET GTX3071, SFS Intake, K&N Filter, Cheapo Ebay Intercooler(coldside 2" pipe work), 850cc Lateral Inj, Ebay Fuel Rails, 10mm Inlet spacers, 3" Cobb Exhaust, GtSpec Headers, Harvey UpPipe, Simtek 1 Ecu, Mapped by the man JGM , Area 52 Rolling Road..+ Aet Hub Dyno which resulted in 422.9bhp at hubs, around 490+Bhp with drive train loss.


8) davidgoodwin1803 - 473.3 bhp @ 1.5 bar - 2003 STi type uk - Pression Turbo (first in UK by RCM) - RCM 3" Exhaust Turbo back - Tesco 99 (NO METH) - RCM induction setup - RCM ceramic headers headers - Perrin FMIC - RCM 340 fuel pump - 1000cc RCM injectors - Alcatek ECU mapped by Engine Tuner.


9) MrNoisy - 472.9 bhp / 425 lbft, V-Power + 20% Meth 2005 STI EJ20 stock internals, SC42 / RCM Headers and Harvey up pipe / Lateral 650cc inj / Scoobyworx 290lph fuel pump / Japspeed FMIC / RCM Induction kit / Prodrive 3 port / Japspeed 3" exhaust / Cold air feed / Alcatek mapped by JGM @ SRR weekend toy.

10) Scoobyken - 471/ 430lbft 2004 sti type uk/ vpower+20% Meth/ Sc42 billet turbo/ 740cc inj/ Lateral headers with harvey up-pipe, full 3in turbo back GRD race system/FMIC/ Simtek ecu mapped by JGM @ SRR weekend toy.

11) MelTypeR - 461bhp / 425 lbft (on V-Power only) 2006 Spec C / Litchfield LM450 (non billet) / 800cc injectors / 3" Miltek De-cat / Hybrid FMIC / SFS 3" intake / Simtek ECU / Mapped by JGM @ Surrey Rolling road (daily driver)


12) dave-w- 450 bhp 400.3 ftlbs (vpower only) Widetrack Blob STI, MDX321T Billet, 650cc injectors rcm headers , FMIC, andy carr mafless


13) DazDavies 449.2bhp 400ftlbs (vpower only) JDM Widetrack Blob STI, LM450 Billet, 800cc injectors, FMIC, Syvecs mapped @ 1.7bar


14) jd5217 - 446bhp / 370lbft / sti04uk / 2.0 ltr standard internals / MD195S / gt spec manifold / APS decat / 650cc inj fpr / fmic / simtek / VPower & 10% meth, mapped by EngineTuner, EngineTuner Dyno


15) Blue by You - 443/428, 2005 Sti, EJ20 stock internals, SC46, Perrin FMIC, 650cc, Syvecs, 20% meth, Milltek 3" decat, RCM headers, mapped by Racedynamix, RCM dyno / (daily drive + track)

16) Kas Spec C - 442.1 bhp/400 lbft 2002 S202 (EJ20) /MD321T with 1.4b actuator, FMIC, 750cc, AVCR, EcuTek, Decat, Equal length headers, 2.5" system/Vpower/Surrey Rolling Road/Jollygreenmonster (Standard engine)

17) JohnD 436bhp 390lbft 2003 STi MDX321H 650 inj. RCM induction, GTspec headers, Harvey up-pipe, Milltek 3" AVC-R, Japspeed FMIC, V-Power only. Mapped by JGM

18) Scooby B - 430bhp / 398lbft / Bugeye sti prodrive / Sc42 / Perrin inlet & induction / RCM 800cc injectors / RCM headers / 3" miltek / alcatek ecu / Vpower or Tesco only / EngineTuner mapped by MJ / Weekend toy with some public track days thrown in [/B]

19) T20Driver - 426bhp, 391lbft, MY05 2.0 JDM STi, Billet LM420, Hybrid FMIC, BRD Induction, 800cc injectors, 3" Miltek decat, Bob Rawle map (Base map update only as Meggarom won't activate AVCS), V Power - daily driver


20) Paulo P (Paul), 421bhp, 360lbft, 2005 sti short motor, ported and polished sti 3 cylinder heads, MD321S turbo (hence the low torque due to lag on a 2 litre), nismo 740cc injectors, 76mm inlet under a much modified version 3 inlet manifold system, tubular headers, FMIC, AVCR, Power FC, Z32 MAF + a lot more!

21) Blocks85, 412/412 on 20% Meth, 2.0 blob Sti, Japspeed ported headers, Japspeed de cat, Japspeed fmic, RAMAIR induction kit, 650 injectors, BIG D ported VF43, 91k miles. Mapped by Martyn j @ ENGINETUNER


22) chrispy200+, 410/410 @1.4bar on V power, v5 Type R with stock EJ257, MD555 76mm inlet, syvecs / Surrey Rolling Road,


23) Jayallen - 404 bhp / 370 lbft @1.5bar /2002 STi (stock EG20) / Andy F TD05 20G / FMIC / RCM Cone Filter / Full De-catted 3" System / Surrey Rolling Road / Duncan Graham( Was a Daily Driver)


24) Turbotits - 401bhp /370 ft/lbs - 2002 STI, 106,000 miles / AFP 18g / vpower(?) + 20% meth / 650cc inj / lateral headers and up pipe, APS CAIK / Simtek mapped by JGM


25) Pez 397 bhp /420 lbft / 2007 2.5 Hawkeye Type-UK / Original vf43/ Hyperflow Monster front mount + intake relocated to inner wing / full miltek exhaust system with de-cats and headers / hayward+scott up pipe / forge 1 bar actuator+dv / standard injectors/ vpower only / S4U Rollers - ECUTek by Bob Rawle

26) Deathlyreaper 396 bhp /360 lbft / 05 widetrack sti / sc46 / k&n typhoon / decat afterburner / gt spec headers / Harvey uppipe / fmic / dv less / 650cc inj / vpower / apt rollers - race dynamix

27) Henrik / 391bhp / 392 lbft / 2003 WRX / td05-20g, lateral 3 bolt headers, apexi intake, fmic, decat down pipe / v-power + 10% e85 / Simon's delta dash / (track-weekend)

28) eelz - 389 bhp / 355 ft/lbs , 2003 sti ,TD 05/06 20g Harvey smith hybrid turbo,WMS s/s headers,walbro 255,fpr,550's,fmic,3 port,Harvey smith up-pipe, k&n CAIK, full de-cat, Dyno-dynamics by Enginemapper momentum 99(daily driver)

29) Sonic93 - 380bhp / 360 lbft / V3 type r sti , standard internals and box, sc40 billet,rcm cone and trumpet / adjustable fpr / lateral injectors / Harvey up pipe / gt spec 3 headers / 3 inch exhaust / evlipse intake pipe / sim tec / fmic

30) Badger 88 - 370bhp/345lbft v-power+20% meth 352bhp/340lbft v-power MY00 uk 2000turbo classic standard untouched ej205 vf35 with forge actuator, decatted 3" open mouth downpipe, 2.5" exhaust system, cheap unequal headers, 650cc injectors, 3port, 255lph intank swirl pot inline Bosch 910, fuel lab regulator, hdi front mount, rcm k&n, alcatek ecu remapped by racedynamix


31) Stu.sti - 358bhp / 338lbft / 1.5bar / 03 sti / vf35 inner wing induction kit, full decat, nur spec r, walbro fuel pump / tesco 99 / delta dash (trackhound) / (weekend use, shops)

32) EqualizerCS - 355 bhp / 362 lbft / MY03 STI EJ20 / VF35 / Standard Internals / Standard TMIC / Aerys 3" Turbo-Back (300 Cells Cat) / Green Performance Cotton Air Filter / Walbro 255 l/h / Ecutek / Fuel 98 Octane / (Daily Drive)

33) the shreksta - 354bhp / 365lbft 54 plate blobeye wrx, sti long engine including avcs heads but not running the avcs yet, vf35 turbo, advanced automotive modded 11mm oil pump, rcm water pump, 650cc injectors, oem recirc valve, sti tgv delete manifold, ngkpfr7b plugs, sti top mount intercooler, silicone intake hose, rcm340 pump, rcm induction kit, rcm headers with venturi up-pipe (all heat wrapped), japspeed full de-cat 3" downpipe (wrapped), 3" afterburner center section, afterburner raptor backbox, version 6 sti 5 speed close ratio box with stage 2 organic clutch,
mapped by duncan @ race dynamix on rcm rollers and open road map tweak


34) Addi Monster - 352bhp 340lbft classic jdm impreza on standard box and lump, 16g fmic 440's with reg, GRP's rollers Dynamix map on simtek.

35) Doobs Scoob - 350.2 / 300lbft / 2000 UK Turbo (EJ20) / VF34 Hybrid / Hyperflow TMIC /VPower / Surrey Rolling Road / JGM. (Daily Drive)

36) Kedlestone - 346.9 / 320 lbft Newage WRX, Standard EJ20, Standard Gearbox, VF34, STI TMIC, Full 2.5 Decat, 550cc Injectors, Walbro Fuel Pump, APS Cold Air Induction, Simtek ECU Mapped by Pat @ SC on V-Power only. Daily Drive.

37) Tidgy - 341.4 / 315 lbft, my99 uk turbo, ppg gearbox, vf34, front mount, decat, autronics ecu mapped by scoobyclinic on v power



38) scc28 - 341 bhp / 355 lb/ft, Forester XT 2005 55 EJ25, VF41- STI ic- Full decat and 2.5" back, v-power or tesco99, Powerstation Rolling Road


39)Psycho Sport - 335/333 2005 Newage WRX. Sc36 16g Turbo, JGM remap, sti injectors, sti intercooler, sports cat down pipe, 2.5 inch system to tailpipe, ported and heat wrapped down pipes, decat up pipe. Run on VPower. Daily Drive

40) mickywrx - 329.4/289lb/ft MY94 WRX Standard EJ20, standard ECU, Standard TD05, Standard 380cc injectors, V Power only, 1bar boost, couple of bolt on's, NOT remapped. Daily driven and it's had some 1/4 mile abuse.


41) Chet123 - 323 bhp/320 lb/ft @ 1.4 bar 04 newage STI, K&N Panel Filter, 3 Port Solenoid, 255 Walbro Fuel Pump, Ported OEM Headers, Harvey Smith slip jointed Up-pipe, Afterburner 2.5" turbo back exhaust system incl. DP, Racedynamix Remap - Standard internals 550 injectors, TMIC all on V-Power

42) Wayne STI - 309.7 bhp / 300.9 lb/ft @ 1.42 bar, 2008 STI (EJ25) dual AVCS / Andy F TD05-20g / 3" Miltek turbo back (sports cat downpipe) / Japspeed FMIC & Induction / Perrin silicone turbo inlet. Block never split standard everything else. V Power only racedynamix map / PJ Motorsports Dynopack hub dyno (daily driver)
Old 18 July 2015, 08:00 PM
  #370  
tweaks
Scooby Regular
iTrader: (7)
 
tweaks's Avatar
 
Join Date: Oct 2008
Location: in an RA
Posts: 1,563
Likes: 0
Received 0 Likes on 0 Posts
Default

1. Tweaks - 533.3/455 -wrx RA - 2005 Sti motor,rotated billet 30r,dw 1000's,airtec rs500 fmic supporting mods etc.
16% meth
Mapped by Martyn J @ engine tuner
Old 19 July 2015, 03:58 AM
  #371  
Linksfahrer
Scooby Regular
 
Linksfahrer's Avatar
 
Join Date: Dec 2013
Location: Torpoint
Posts: 677
Received 48 Likes on 40 Posts
Thumbs up

Originally Posted by tweaks
1. Tweaks - 533.3/455 -wrx RA - 2005 Sti motor,rotated billet 30r,dw 1000's,airtec rs500 fmic supporting mods etc.
16% meth
Mapped by Martyn J @ engine tuner
Old 19 July 2015, 11:49 PM
  #372  
tweaks
Scooby Regular
iTrader: (7)
 
tweaks's Avatar
 
Join Date: Oct 2008
Location: in an RA
Posts: 1,563
Likes: 0
Received 0 Likes on 0 Posts
Default

Haha,cheers Ralph

Tim
Old 20 July 2015, 10:17 AM
  #373  
MartynJ
Scooby Regular
 
MartynJ's Avatar
 
Join Date: Jan 2006
Location: Enginetuner Plymouth for 4wd RR Mapping Apexi Ecutek Alcatek Proper Garage More than just a laptop!
Posts: 2,629
Received 3 Likes on 2 Posts
Default

Originally Posted by tweaks
1. Tweaks - 533.3/455 -wrx RA - 2005 Sti motor,rotated billet 30r,dw 1000's,airtec rs500 fmic supporting mods etc.
16% meth
Mapped by Martyn J @ engine tuner

Name:  Scan0061e_zps8asasjof.jpg
Views: 0
Size:  55.5 KB
Old 20 July 2015, 11:36 AM
  #374  
joe v3sti
Scooby Regular
iTrader: (8)
 
joe v3sti's Avatar
 
Join Date: Dec 2011
Location: yorkshire
Posts: 3,244
Likes: 0
Received 23 Likes on 17 Posts
Default

Great work Martyn!
You should be on for a 10second run at totb for sure Tim
Look forward to seeing it in the flesh

Last edited by joe v3sti; 20 July 2015 at 11:50 AM.
Old 20 July 2015, 12:17 PM
  #375  
tweaks
Scooby Regular
iTrader: (7)
 
tweaks's Avatar
 
Join Date: Oct 2008
Location: in an RA
Posts: 1,563
Likes: 0
Received 0 Likes on 0 Posts
Default

Cheers joe,
I would hope so pal,my v3 Sti ran high 10's with less and full fat.
All down to the idiot behind the wheel now !
10's at totb will put you way down the leaderboard though won't it lol

Tim
Old 20 July 2015, 02:48 PM
  #376  
joe v3sti
Scooby Regular
iTrader: (8)
 
joe v3sti's Avatar
 
Join Date: Dec 2011
Location: yorkshire
Posts: 3,244
Likes: 0
Received 23 Likes on 17 Posts
Default

Lol you right mate it will, you need or less to be up there. Crazy!
Look forward to seeing it tho mate
Old 13 November 2015, 10:13 PM
  #377  
Ginola
Scooby Regular
iTrader: (25)
 
Ginola's Avatar
 
Join Date: Feb 2010
Location: Drinking Coffee somewhere.
Posts: 1,326
Received 2 Likes on 2 Posts
Default

Thought I'd add my results from today to the list

Name:  IMG_5308%201_zpsekrlmtaf.jpg
Views: 0
Size:  373.5 KB

.
.

1) WhiteWagonMan - 505 bhp / 456 lbft - 1998 v5 STi(JDM v8 STi EJ20 bottom end) SC42 Billet / Afterburner Vortex R 3" zorst / Vpower + 20% meth / RCM induction setup / WR1 DCCD 6 speed box / GTspec headers / Harvey smith uppipe / FMIC / AP Racing brakes / Fuelab FPR / Walbro 300 pump / lateral 900cc injectors / syvecs ECU / mapped by mr syvecs himself Pat Herborn / Scoobyclinic RR and Road mapped / daily driven road car


2) DazDavies 504bhp / 2005 JDM STI LM450 Billet, FMIC, PE800cc injectors, Syvecs Mapped by JGM Vpower and 15% meth


3) Tazz01wrx - 503.9 bhp - 2003 JDM STI - Vpower + 20% meth / SC46 billet twin scroll / 3" Milltek exhaust / Ecutek 800cc injectors / RCM fuel pump and RCM fuel rails and parallel setup with fuel lab reg / fmic / RCM induction kit / Syvecs ecu / SFS intake hose / Inlet manifold thermal spacers / Mapped by JGM.


4) Shaun - 490bhp / 475lbft - 2006 JDM 2ltr STI, 20% Meth Mix, Billet LM450, BRD Induction Kit, SFS Intake Hose, Hybrid FMIC, 800cc inj, 3" Miltek and standard ECU mapped by Bob Rawle and power figures from SRR. Predominantly road use, but is used for everything and anything, including public track days and competition use.


5) Stevesbluewrx - 482 bhp / 448 lbft - 2002 STi (EJ20) / MDX321T (BILLET T71) 3" RCM Exhaust (With Sports cat) / Vpower + 18% Meth / CAIK / SimTek/AlcaTek ecu / 2 way FPR with parrellel set up / Lateral 850cc injectors / Surrey Rolling Road / Jollygreenmonster ( Daily Driver)


6) Dubzy - 481 bhp - 2004 STi (EJ20) / Md321T Billet Turbo / 3" Aps Decat / V-power + 20% Meth @ 1.7 bar / Alcatek / Sard 650cc Injectors / Rcm 340lph Fp / Rcm Induction Kit / Hdi Fmic / Wms Headers / Mapped by Mark @ TDR (Thwaites Developments)


7) Turboturner - 479.9 bhp / 470lbft - 2005 2ltr Euro STI, 20% Meth Mix, AET GTX3071, SFS Intake, K&N Filter, Cheapo Ebay Intercooler(coldside 2" pipe work), 850cc Lateral Inj, Ebay Fuel Rails, 10mm Inlet spacers, 3" Cobb Exhaust, GtSpec Headers, Harvey UpPipe, Simtek 1 Ecu, Mapped by the man JGM , Area 52 Rolling Road..+ Aet Hub Dyno which resulted in 422.9bhp at hubs, around 490+Bhp with drive train loss.


8) davidgoodwin1803 - 473.3 bhp @ 1.5 bar - 2003 STi type uk - Pression Turbo (first in UK by RCM) - RCM 3" Exhaust Turbo back - Tesco 99 (NO METH) - RCM induction setup - RCM ceramic headers headers - Perrin FMIC - RCM 340 fuel pump - 1000cc RCM injectors - Alcatek ECU mapped by Engine Tuner.


9) MrNoisy - 472.9 bhp / 425 lbft, V-Power + 20% Meth 2005 STI EJ20 stock internals, SC42 / RCM Headers and Harvey up pipe / Lateral 650cc inj / Scoobyworx 290lph fuel pump / Japspeed FMIC / RCM Induction kit / Prodrive 3 port / Japspeed 3" exhaust / Cold air feed / Alcatek mapped by JGM @ SRR weekend toy.

10) Scoobyken - 471/ 430lbft 2004 sti type uk/ vpower+20% Meth/ Sc42 billet turbo/ 740cc inj/ Lateral headers with harvey up-pipe, full 3in turbo back GRD race system/FMIC/ Simtek ecu mapped by JGM @ SRR weekend toy.

11) MelTypeR - 461bhp / 425 lbft (on V-Power only) 2006 Spec C / Litchfield LM450 (non billet) / 800cc injectors / 3" Miltek De-cat / Hybrid FMIC / SFS 3" intake / Simtek ECU / Mapped by JGM @ Surrey Rolling road (daily driver)


12) dave-w- 450 bhp 400.3 ftlbs (vpower only) Widetrack Blob STI, MDX321T Billet, 650cc injectors rcm headers , FMIC, andy carr mafless


13) DazDavies 449.2bhp 400ftlbs (vpower only) JDM Widetrack Blob STI, LM450 Billet, 800cc injectors, FMIC, Syvecs mapped @ 1.7bar


14) jd5217 - 446bhp / 370lbft / sti04uk / 2.0 ltr standard internals / MD195S / gt spec manifold / APS decat / 650cc inj fpr / fmic / simtek / VPower & 10% meth, mapped by EngineTuner, EngineTuner Dyno


15) Blue by You - 443/428, 2005 Sti, EJ20 stock internals, SC46, Perrin FMIC, 650cc, Syvecs, 20% meth, Milltek 3" decat, RCM headers, mapped by Racedynamix, RCM dyno / (daily drive + track)

16) Kas Spec C - 442.1 bhp/400 lbft 2002 S202 (EJ20) /MD321T with 1.4b actuator, FMIC, 750cc, AVCR, EcuTek, Decat, Equal length headers, 2.5" system/Vpower/Surrey Rolling Road/Jollygreenmonster (Standard engine)

17) Ginola - 440bhp / 380lb/ft @1.6bar V-power only -2005 STI (2002JDM STI EJ20 standard Engine) MD321T, HDI FMIC, Harvey 3 bolt/ RCM Headers, 840cc injectors, 3" exhaust, AVCR, Standard ECU
Mapped by FB Tuning


18) JohnD 436bhp 390lbft 2003 STi MDX321H 650 inj. RCM induction, GTspec headers, Harvey up-pipe, Milltek 3" AVC-R, Japspeed FMIC, V-Power only. Mapped by JGM

19) Scooby B - 430bhp / 398lbft / Bugeye sti prodrive / Sc42 / Perrin inlet & induction / RCM 800cc injectors / RCM headers / 3" miltek / alcatek ecu / Vpower or Tesco only / EngineTuner mapped by MJ / Weekend toy with some public track days thrown in [/B]

20) T20Driver - 426bhp, 391lbft, MY05 2.0 JDM STi, Billet LM420, Hybrid FMIC, BRD Induction, 800cc injectors, 3" Miltek decat, Bob Rawle map (Base map update only as Meggarom won't activate AVCS), V Power - daily driver


21) Paulo P (Paul), 421bhp, 360lbft, 2005 sti short motor, ported and polished sti 3 cylinder heads, MD321S turbo (hence the low torque due to lag on a 2 litre), nismo 740cc injectors, 76mm inlet under a much modified version 3 inlet manifold system, tubular headers, FMIC, AVCR, Power FC, Z32 MAF + a lot more!

22) Blocks85, 412/412 on 20% Meth, 2.0 blob Sti, Japspeed ported headers, Japspeed de cat, Japspeed fmic, RAMAIR induction kit, 650 injectors, BIG D ported VF43, 91k miles. Mapped by Martyn j @ ENGINETUNER


23) chrispy200+, 410/410 @1.4bar on V power, v5 Type R with stock EJ257, MD555 76mm inlet, syvecs / Surrey Rolling Road,


24) Jayallen - 404 bhp / 370 lbft @1.5bar /2002 STi (stock EG20) / Andy F TD05 20G / FMIC / RCM Cone Filter / Full De-catted 3" System / Surrey Rolling Road / Duncan Graham( Was a Daily Driver)


25) Turbotits - 401bhp /370 ft/lbs - 2002 STI, 106,000 miles / AFP 18g / vpower(?) + 20% meth / 650cc inj / lateral headers and up pipe, APS CAIK / Simtek mapped by JGM


26) Pez 397 bhp /420 lbft / 2007 2.5 Hawkeye Type-UK / Original vf43/ Hyperflow Monster front mount + intake relocated to inner wing / full miltek exhaust system with de-cats and headers / hayward+scott up pipe / forge 1 bar actuator+dv / standard injectors/ vpower only / S4U Rollers - ECUTek by Bob Rawle

27) Deathlyreaper 396 bhp /360 lbft / 05 widetrack sti / sc46 / k&n typhoon / decat afterburner / gt spec headers / Harvey uppipe / fmic / dv less / 650cc inj / vpower / apt rollers - race dynamix

28) Henrik / 391bhp / 392 lbft / 2003 WRX / td05-20g, lateral 3 bolt headers, apexi intake, fmic, decat down pipe / v-power + 10% e85 / Simon's delta dash / (track-weekend)

29) eelz - 389 bhp / 355 ft/lbs , 2003 sti ,TD 05/06 20g Harvey smith hybrid turbo,WMS s/s headers,walbro 255,fpr,550's,fmic,3 port,Harvey smith up-pipe, k&n CAIK, full de-cat, Dyno-dynamics by Enginemapper momentum 99(daily driver)

30) Sonic93 - 380bhp / 360 lbft / V3 type r sti , standard internals and box, sc40 billet,rcm cone and trumpet / adjustable fpr / lateral injectors / Harvey up pipe / gt spec 3 headers / 3 inch exhaust / evlipse intake pipe / sim tec / fmic

31) Badger 88 - 370bhp/345lbft v-power+20% meth 352bhp/340lbft v-power MY00 uk 2000turbo classic standard untouched ej205 vf35 with forge actuator, decatted 3" open mouth downpipe, 2.5" exhaust system, cheap unequal headers, 650cc injectors, 3port, 255lph intank swirl pot inline Bosch 910, fuel lab regulator, hdi front mount, rcm k&n, alcatek ecu remapped by racedynamix


32) Stu.sti - 358bhp / 338lbft / 1.5bar / 03 sti / vf35 inner wing induction kit, full decat, nur spec r, walbro fuel pump / tesco 99 / delta dash (trackhound) / (weekend use, shops)

33) EqualizerCS - 355 bhp / 362 lbft / MY03 STI EJ20 / VF35 / Standard Internals / Standard TMIC / Aerys 3" Turbo-Back (300 Cells Cat) / Green Performance Cotton Air Filter / Walbro 255 l/h / Ecutek / Fuel 98 Octane / (Daily Drive)

34) the shreksta - 354bhp / 365lbft 54 plate blobeye wrx, sti long engine including avcs heads but not running the avcs yet, vf35 turbo, advanced automotive modded 11mm oil pump, rcm water pump, 650cc injectors, oem recirc valve, sti tgv delete manifold, ngkpfr7b plugs, sti top mount intercooler, silicone intake hose, rcm340 pump, rcm induction kit, rcm headers with venturi up-pipe (all heat wrapped), japspeed full de-cat 3" downpipe (wrapped), 3" afterburner center section, afterburner raptor backbox, version 6 sti 5 speed close ratio box with stage 2 organic clutch,
mapped by duncan @ race dynamix on rcm rollers and open road map tweak


35) Addi Monster - 352bhp 340lbft classic jdm impreza on standard box and lump, 16g fmic 440's with reg, GRP's rollers Dynamix map on simtek.

36) Doobs Scoob - 350.2 / 300lbft / 2000 UK Turbo (EJ20) / VF34 Hybrid / Hyperflow TMIC /VPower / Surrey Rolling Road / JGM. (Daily Drive)

37) Kedlestone - 346.9 / 320 lbft Newage WRX, Standard EJ20, Standard Gearbox, VF34, STI TMIC, Full 2.5 Decat, 550cc Injectors, Walbro Fuel Pump, APS Cold Air Induction, Simtek ECU Mapped by Pat @ SC on V-Power only. Daily Drive.

38) Tidgy - 341.4 / 315 lbft, my99 uk turbo, ppg gearbox, vf34, front mount, decat, autronics ecu mapped by scoobyclinic on v power



39) scc28 - 341 bhp / 355 lb/ft, Forester XT 2005 55 EJ25, VF41- STI ic- Full decat and 2.5" back, v-power or tesco99, Powerstation Rolling Road


40)Psycho Sport - 335/333 2005 Newage WRX. Sc36 16g Turbo, JGM remap, sti injectors, sti intercooler, sports cat down pipe, 2.5 inch system to tailpipe, ported and heat wrapped down pipes, decat up pipe. Run on VPower. Daily Drive

41) mickywrx - 329.4/289lb/ft MY94 WRX Standard EJ20, standard ECU, Standard TD05, Standard 380cc injectors, V Power only, 1bar boost, couple of bolt on's, NOT remapped. Daily driven and it's had some 1/4 mile abuse.


42) Chet123 - 323 bhp/320 lb/ft @ 1.4 bar 04 newage STI, K&N Panel Filter, 3 Port Solenoid, 255 Walbro Fuel Pump, Ported OEM Headers, Harvey Smith slip jointed Up-pipe, Afterburner 2.5" turbo back exhaust system incl. DP, Racedynamix Remap - Standard internals 550 injectors, TMIC all on V-Power

43) Wayne STI - 309.7 bhp / 300.9 lb/ft @ 1.42 bar, 2008 STI (EJ25) dual AVCS / Andy F TD05-20g / 3" Miltek turbo back (sports cat downpipe) / Japspeed FMIC & Induction / Perrin silicone turbo inlet. Block never split standard everything else. V Power only racedynamix map / PJ Motorsports Dynopack hub dyno (daily driver)

Last edited by Ginola; 13 November 2015 at 10:24 PM.
Old 09 March 2016, 02:03 PM
  #378  
FR02 MAK
Scooby Newbie
 
FR02 MAK's Avatar
 
Join Date: Jan 2013
Location: east london
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default FR02 MAK my results for the list



501bhp jdm ej207,SC50,lateral gt spec headers,Harvey up pipe ,asnu 1050 injectors,Walbro400 pump,rcm fuel rails, flex fuel sensor ,syvecs ecu ,accusump,rcm sump baffle ,25 row Setrab oil cooler
Old 11 March 2016, 07:46 AM
  #379  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

Lagatron!
Old 11 March 2016, 08:29 AM
  #380  
JGlanzaV
Scooby Regular
iTrader: (3)
 
JGlanzaV's Avatar
 
Join Date: May 2009
Posts: 5,021
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Shaun
Lagatron!

I fear maybe this is for ***** waving as opposed to driving!

That is some terrible lag....
Old 14 March 2016, 04:08 AM
  #381  
rogos
Scooby Regular
 
rogos's Avatar
 
Join Date: May 2010
Location: kent
Posts: 195
Likes: 0
Received 0 Likes on 0 Posts
Default

322/307 on pretty much a std 05 sti widetrack with typical ppp, the only things changed so far is the centre pipe is straight non res and back box is a vortex job both made by h&s, i changed the walbro/ppp fuel pump for the rcm 320lph as i am not too fond of walbro, then its just a set of ngk iridium (heat8) plugs with racedynamix road remap. I do want to chase the 400 zone as that is relatively easy to achieve but don't want to make too many changes to it plus i like the broadness of the vf35's power delivery, decisions decisions....


Last edited by rogos; 16 March 2016 at 09:02 PM. Reason: Added graph.
Old 14 March 2016, 02:56 PM
  #382  
MartynJ
Scooby Regular
 
MartynJ's Avatar
 
Join Date: Jan 2006
Location: Enginetuner Plymouth for 4wd RR Mapping Apexi Ecutek Alcatek Proper Garage More than just a laptop!
Posts: 2,629
Received 3 Likes on 2 Posts
Default

1) Tweaks - 533.3/455 -wrx RA - 2005 Sti motor,rotated billet 30r,dw 1000's,airtec rs500 fmic supporting mods etc.
16% meth
Mapped by Martyn J @ engine tuner


2) WhiteWagonMan - 505 bhp / 456 lbft - 1998 v5 STi(JDM v8 STi EJ20 bottom end) SC42 Billet / Afterburner Vortex R 3" zorst / Vpower + 20% meth / RCM induction setup / WR1 DCCD 6 speed box / GTspec headers / Harvey smith uppipe / FMIC / AP Racing brakes / Fuelab FPR / Walbro 300 pump / lateral 900cc injectors / syvecs ECU / mapped by mr syvecs himself Pat Herborn / Scoobyclinic RR and Road mapped / daily driven road car


3) DazDavies 504bhp / 2005 JDM STI LM450 Billet, FMIC, PE800cc injectors, Syvecs Mapped by JGM Vpower and 15% meth


4) Tazz01wrx - 503.9 bhp - 2003 JDM STI - Vpower + 20% meth / SC46 billet twin scroll / 3" Milltek exhaust / Ecutek 800cc injectors / RCM fuel pump and RCM fuel rails and parallel setup with fuel lab reg / fmic / RCM induction kit / Syvecs ecu / SFS intake hose / Inlet manifold thermal spacers / Mapped by JGM.


5) Shaun - 490bhp / 475lbft - 2006 JDM 2ltr STI, 20% Meth Mix, Billet LM450, BRD Induction Kit, SFS Intake Hose, Hybrid FMIC, 800cc inj, 3" Miltek and standard ECU mapped by Bob Rawle and power figures from SRR. Predominantly road use, but is used for everything and anything, including public track days and competition use.


6) Stevesbluewrx - 482 bhp / 448 lbft - 2002 STi (EJ20) / MDX321T (BILLET T71) 3" RCM Exhaust (With Sports cat) / Vpower + 18% Meth / CAIK / SimTek/AlcaTek ecu / 2 way FPR with parrellel set up / Lateral 850cc injectors / Surrey Rolling Road / Jollygreenmonster ( Daily Driver)


7) Dubzy - 481 bhp - 2004 STi (EJ20) / Md321T Billet Turbo / 3" Aps Decat / V-power + 20% Meth @ 1.7 bar / Alcatek / Sard 650cc Injectors / Rcm 340lph Fp / Rcm Induction Kit / Hdi Fmic / Wms Headers / Mapped by Mark @ TDR (Thwaites Developments)


8) Turboturner - 479.9 bhp / 470lbft - 2005 2ltr Euro STI, 20% Meth Mix, AET GTX3071, SFS Intake, K&N Filter, Cheapo Ebay Intercooler(coldside 2" pipe work), 850cc Lateral Inj, Ebay Fuel Rails, 10mm Inlet spacers, 3" Cobb Exhaust, GtSpec Headers, Harvey UpPipe, Simtek 1 Ecu, Mapped by the man JGM , Area 52 Rolling Road..+ Aet Hub Dyno which resulted in 422.9bhp at hubs, around 490+Bhp with drive train loss.


9) davidgoodwin1803 - 473.3 bhp @ 1.5 bar - 2003 STi type uk - Pression Turbo (first in UK by RCM) - RCM 3" Exhaust Turbo back - Tesco 99 (NO METH) - RCM induction setup - RCM ceramic headers headers - Perrin FMIC - RCM 340 fuel pump - 1000cc RCM injectors - Alcatek ECU mapped by Engine Tuner.


10) MrNoisy - 472.9 bhp / 425 lbft, V-Power + 20% Meth 2005 STI EJ20 stock internals, SC42 / RCM Headers and Harvey up pipe / Lateral 650cc inj / Scoobyworx 290lph fuel pump / Japspeed FMIC / RCM Induction kit / Prodrive 3 port / Japspeed 3" exhaust / Cold air feed / Alcatek mapped by JGM @ SRR weekend toy.

11) Scoobyken - 471/ 430lbft 2004 sti type uk/ vpower+20% Meth/ Sc42 billet turbo/ 740cc inj/ Lateral headers with harvey up-pipe, full 3in turbo back GRD race system/FMIC/ Simtek ecu mapped by JGM @ SRR weekend toy.

12) MelTypeR - 461bhp / 425 lbft (on V-Power only) 2006 Spec C / Litchfield LM450 (non billet) / 800cc injectors / 3" Miltek De-cat / Hybrid FMIC / SFS 3" intake / Simtek ECU / Mapped by JGM @ Surrey Rolling road (daily driver)


13) dave-w- 450 bhp 400.3 ftlbs (vpower only) Widetrack Blob STI, MDX321T Billet, 650cc injectors rcm headers , FMIC, andy carr mafless


14) DazDavies 449.2bhp 400ftlbs (vpower only) JDM Widetrack Blob STI, LM450 Billet, 800cc injectors, FMIC, Syvecs mapped @ 1.7bar


15) jd5217 - 446bhp / 370lbft / sti04uk / 2.0 ltr standard internals / MD195S / gt spec manifold / APS decat / 650cc inj fpr / fmic / simtek / VPower & 10% meth, mapped by EngineTuner, EngineTuner Dyno


16) Blue by You - 443/428, 2005 Sti, EJ20 stock internals, SC46, Perrin FMIC, 650cc, Syvecs, 20% meth, Milltek 3" decat, RCM headers, mapped by Racedynamix, RCM dyno / (daily drive + track)

17) Kas Spec C - 442.1 bhp/400 lbft 2002 S202 (EJ20) /MD321T with 1.4b actuator, FMIC, 750cc, AVCR, EcuTek, Decat, Equal length headers, 2.5" system/Vpower/Surrey Rolling Road/Jollygreenmonster (Standard engine)

18) Ginola - 440bhp / 380lb/ft @1.6bar V-power only -2005 STI (2002JDM STI EJ20 standard Engine) MD321T, HDI FMIC, Harvey 3 bolt/ RCM Headers, 840cc injectors, 3" exhaust, AVCR, Standard ECU
Mapped by FB Tuning

19) JohnD 436bhp 390lbft 2003 STi MDX321H 650 inj. RCM induction, GTspec headers, Harvey up-pipe, Milltek 3" AVC-R, Japspeed FMIC, V-Power only. Mapped by JGM

20) Scooby B - 430bhp / 398lbft / Bugeye sti prodrive / Sc42 / Perrin inlet & induction / RCM 800cc injectors / RCM headers / 3" miltek / alcatek ecu / Vpower or Tesco only / EngineTuner mapped by MJ / Weekend toy with some public track days thrown in [/B]

21) T20Driver - 426bhp, 391lbft, MY05 2.0 JDM STi, Billet LM420, Hybrid FMIC, BRD Induction, 800cc injectors, 3" Miltek decat, Bob Rawle map (Base map update only as Meggarom won't activate AVCS), V Power - daily driver


22) Paulo P (Paul), 421bhp, 360lbft, 2005 sti short motor, ported and polished sti 3 cylinder heads, MD321S turbo (hence the low torque due to lag on a 2 litre), nismo 740cc injectors, 76mm inlet under a much modified version 3 inlet manifold system, tubular headers, FMIC, AVCR, Power FC, Z32 MAF + a lot more!

23) Blocks85, 412/412 on 20% Meth, 2.0 blob Sti, Japspeed ported headers, Japspeed de cat, Japspeed fmic, RAMAIR induction kit, 650 injectors, BIG D ported VF43, 91k miles. Mapped by Martyn j @ ENGINETUNER


24) chrispy200+, 410/410 @1.4bar on V power, v5 Type R with stock EJ257, MD555 76mm inlet, syvecs / Surrey Rolling Road,


25) Jayallen - 404 bhp / 370 lbft @1.5bar /2002 STi (stock EG20) / Andy F TD05 20G / FMIC / RCM Cone Filter / Full De-catted 3" System / Surrey Rolling Road / Duncan Graham( Was a Daily Driver)


26) Turbotits - 401bhp /370 ft/lbs - 2002 STI, 106,000 miles / AFP 18g / vpower(?) + 20% meth / 650cc inj / lateral headers and up pipe, APS CAIK / Simtek mapped by JGM


27) Pez 397 bhp /420 lbft / 2007 2.5 Hawkeye Type-UK / Original vf43/ Hyperflow Monster front mount + intake relocated to inner wing / full miltek exhaust system with de-cats and headers / hayward+scott up pipe / forge 1 bar actuator+dv / standard injectors/ vpower only / S4U Rollers - ECUTek by Bob Rawle

28) Deathlyreaper 396 bhp /360 lbft / 05 widetrack sti / sc46 / k&n typhoon / decat afterburner / gt spec headers / Harvey uppipe / fmic / dv less / 650cc inj / vpower / apt rollers - race dynamix

29) Henrik / 391bhp / 392 lbft / 2003 WRX / td05-20g, lateral 3 bolt headers, apexi intake, fmic, decat down pipe / v-power + 10% e85 / Simon's delta dash / (track-weekend)

30) eelz - 389 bhp / 355 ft/lbs , 2003 sti ,TD 05/06 20g Harvey smith hybrid turbo,WMS s/s headers,walbro 255,fpr,550's,fmic,3 port,Harvey smith up-pipe, k&n CAIK, full de-cat, Dyno-dynamics by Enginemapper momentum 99(daily driver)

31) Sonic93 - 380bhp / 360 lbft / V3 type r sti , standard internals and box, sc40 billet,rcm cone and trumpet / adjustable fpr / lateral injectors / Harvey up pipe / gt spec 3 headers / 3 inch exhaust / evlipse intake pipe / sim tec / fmic

32) Badger 88 - 370bhp/345lbft v-power+20% meth 352bhp/340lbft v-power MY00 uk 2000turbo classic standard untouched ej205 vf35 with forge actuator, decatted 3" open mouth downpipe, 2.5" exhaust system, cheap unequal headers, 650cc injectors, 3port, 255lph intank swirl pot inline Bosch 910, fuel lab regulator, hdi front mount, rcm k&n, alcatek ecu remapped by racedynamix


33) Stu.sti - 358bhp / 338lbft / 1.5bar / 03 sti / vf35 inner wing induction kit, full decat, nur spec r, walbro fuel pump / tesco 99 / delta dash (trackhound) / (weekend use, shops)

34) EqualizerCS - 355 bhp / 362 lbft / MY03 STI EJ20 / VF35 / Standard Internals / Standard TMIC / Aerys 3" Turbo-Back (300 Cells Cat) / Green Performance Cotton Air Filter / Walbro 255 l/h / Ecutek / Fuel 98 Octane / (Daily Drive)

35) the shreksta - 354bhp / 365lbft 54 plate blobeye wrx, sti long engine including avcs heads but not running the avcs yet, vf35 turbo, advanced automotive modded 11mm oil pump, rcm water pump, 650cc injectors, oem recirc valve, sti tgv delete manifold, ngkpfr7b plugs, sti top mount intercooler, silicone intake hose, rcm340 pump, rcm induction kit, rcm headers with venturi up-pipe (all heat wrapped), japspeed full de-cat 3" downpipe (wrapped), 3" afterburner center section, afterburner raptor backbox, version 6 sti 5 speed close ratio box with stage 2 organic clutch,
mapped by duncan @ race dynamix on rcm rollers and open road map tweak


36) Addi Monster - 352bhp 340lbft classic jdm impreza on standard box and lump, 16g fmic 440's with reg, GRP's rollers Dynamix map on simtek.

37) Doobs Scoob - 350.2 / 300lbft / 2000 UK Turbo (EJ20) / VF34 Hybrid / Hyperflow TMIC /VPower / Surrey Rolling Road / JGM. (Daily Drive)

38) Kedlestone - 346.9 / 320 lbft Newage WRX, Standard EJ20, Standard Gearbox, VF34, STI TMIC, Full 2.5 Decat, 550cc Injectors, Walbro Fuel Pump, APS Cold Air Induction, Simtek ECU Mapped by Pat @ SC on V-Power only. Daily Drive.

39) Tidgy - 341.4 / 315 lbft, my99 uk turbo, ppg gearbox, vf34, front mount, decat, autronics ecu mapped by scoobyclinic on v power



40) scc28 - 341 bhp / 355 lb/ft, Forester XT 2005 55 EJ25, VF41- STI ic- Full decat and 2.5" back, v-power or tesco99, Powerstation Rolling Road


41)Psycho Sport - 335/333 2005 Newage WRX. Sc36 16g Turbo, JGM remap, sti injectors, sti intercooler, sports cat down pipe, 2.5 inch system to tailpipe, ported and heat wrapped down pipes, decat up pipe. Run on VPower. Daily Drive

42) mickywrx - 329.4/289lb/ft MY94 WRX Standard EJ20, standard ECU, Standard TD05, Standard 380cc injectors, V Power only, 1bar boost, couple of bolt on's, NOT remapped. Daily driven and it's had some 1/4 mile abuse.


43) Chet123 - 323 bhp/320 lb/ft @ 1.4 bar 04 newage STI, K&N Panel Filter, 3 Port Solenoid, 255 Walbro Fuel Pump, Ported OEM Headers, Harvey Smith slip jointed Up-pipe, Afterburner 2.5" turbo back exhaust system incl. DP, Racedynamix Remap - Standard internals 550 injectors, TMIC all on V-Power

44) Wayne STI - 309.7 bhp / 300.9 lb/ft @ 1.42 bar, 2008 STI (EJ25) dual AVCS / Andy F TD05-20g / 3" Miltek turbo back (sports cat downpipe) / Japspeed FMIC & Induction / Perrin silicone turbo inlet. Block never split standard everything else. V Power only racedynamix map / PJ Motorsports Dynopack hub dyno (daily driver)




Edited to show who's on top
Old 14 March 2016, 07:06 PM
  #383  
joz8968
Scooby Regular
iTrader: (13)
 
joz8968's Avatar
 
Join Date: Aug 2006
Location: Leicester
Posts: 23,761
Likes: 0
Received 8 Likes on 6 Posts
Default

Poseur.
Old 14 March 2016, 07:57 PM
  #384  
scoobiepaul
Scooby Regular
 
scoobiepaul's Avatar
 
Join Date: Aug 2007
Posts: 672
Received 2 Likes on 2 Posts
Default

Trader Score:*(0)

Join Date: Jan 2006

Location: Enginetuner Plymouth for 4wd RR Mapping Apexi Ecutek Alcatek Proper Garage More than just a laptop!

Posts: 2,549

1) Tweaks - 533.3/455 -wrx RA - 2005 Sti motor,rotated billet 30r,dw 1000's,airtec rs500 fmic supporting mods etc.
16% meth
Mapped by Martyn J @ engine tuner


2) WhiteWagonMan - 505 bhp / 456 lbft - 1998 v5 STi(JDM v8 STi EJ20 bottom end) SC42 Billet / Afterburner Vortex R 3" zorst / Vpower + 20% meth / RCM induction setup / WR1 DCCD 6 speed box / GTspec headers / Harvey smith uppipe / FMIC / AP Racing brakes / Fuelab FPR / Walbro 300 pump / lateral 900cc injectors / syvecs ECU / mapped by mr syvecs himself Pat Herborn / Scoobyclinic RR and Road mapped / daily driven road car


3) DazDavies 504bhp / 2005 JDM STI LM450 Billet, FMIC, PE800cc injectors, Syvecs Mapped by JGM Vpower and 15% meth


4) Tazz01wrx - 503.9 bhp - 2003 JDM STI - Vpower + 20% meth / SC46 billet twin scroll / 3" Milltek exhaust / Ecutek 800cc injectors / RCM fuel pump and RCM fuel rails and parallel setup with fuel lab reg / fmic / RCM induction kit / Syvecs ecu / SFS intake hose / Inlet manifold thermal spacers / Mapped by JGM.


5) Shaun - 490bhp / 475lbft - 2006 JDM 2ltr STI, 20% Meth Mix, Billet LM450, BRD Induction Kit, SFS Intake Hose, Hybrid FMIC, 800cc inj, 3" Miltek and standard ECU mapped by Bob Rawle and power figures from SRR. Predominantly road use, but is used for everything and anything, including public track days and competition use.


6) Stevesbluewrx - 482 bhp / 448 lbft - 2002 STi (EJ20) / MDX321T (BILLET T71) 3" RCM Exhaust (With Sports cat) / Vpower + 18% Meth / CAIK / SimTek/AlcaTek ecu / 2 way FPR with parrellel set up / Lateral 850cc injectors / Surrey Rolling Road / Jollygreenmonster ( Daily Driver)*


7) Dubzy - 481 bhp - 2004 STi (EJ20) / Md321T Billet Turbo / 3" Aps Decat / V-power + 20% Meth @ 1.7 bar / Alcatek / Sard 650cc Injectors / Rcm 340lph Fp / Rcm Induction Kit / Hdi Fmic / Wms Headers / Mapped by Mark @ TDR (Thwaites Developments)


8) Turboturner - 479.9 bhp / 470lbft - 2005 2ltr Euro STI, 20% Meth Mix, AET GTX3071, SFS Intake, K&N Filter, Cheapo Ebay Intercooler(coldside 2" pipe work), 850cc Lateral Inj, Ebay Fuel Rails, 10mm Inlet spacers, 3" Cobb Exhaust, GtSpec Headers, Harvey UpPipe, Simtek 1 Ecu, Mapped by the man JGM , Area 52 Rolling Road..+ Aet Hub Dyno which resulted in 422.9bhp at hubs, around 490+Bhp with drive train loss.


9) davidgoodwin1803 - 473.3 bhp @ 1.5 bar - 2003 STi type uk - Pression Turbo (first in UK by RCM) - RCM 3" Exhaust Turbo back - Tesco 99 (NO METH) - RCM induction setup - RCM ceramic headers headers - Perrin FMIC - RCM 340 fuel pump - 1000cc RCM injectors - Alcatek ECU mapped by Engine Tuner.


10) MrNoisy - 472.9 bhp / 425 lbft, V-Power + 20% Meth 2005 STI EJ20 stock internals, SC42 / RCM Headers and Harvey up pipe / Lateral 650cc inj / Scoobyworx 290lph fuel pump / Japspeed FMIC / RCM Induction kit / Prodrive 3 port / Japspeed 3" exhaust / Cold air feed / Alcatek mapped by JGM @ SRR weekend toy.

11) Scoobyken - 471/ 430lbft 2004 sti type uk/ vpower+20% Meth/ Sc42 billet turbo/ 740cc inj/ Lateral headers with harvey up-pipe, full 3in turbo back GRD race system/FMIC/ Simtek ecu mapped by JGM @ SRR weekend toy.

12) MelTypeR - 461bhp / 425 lbft (on V-Power only) 2006 Spec C / Litchfield LM450 (non billet) / 800cc injectors / 3" Miltek De-cat / Hybrid FMIC / SFS 3" intake / Simtek ECU / Mapped by JGM @ Surrey Rolling road (daily driver)


13) dave-w- 450 bhp 400.3 ftlbs (vpower only) Widetrack Blob STI, MDX321T Billet, 650cc injectors rcm headers , FMIC, andy carr mafless


14) DazDavies 449.2bhp 400ftlbs (vpower only) JDM Widetrack Blob STI, LM450 Billet, 800cc injectors, FMIC, Syvecs mapped @ 1.7bar*


15) jd5217 - 446bhp / 370lbft / sti04uk / 2.0 ltr standard internals / MD195S / gt spec manifold / APS decat / 650cc inj fpr / fmic / simtek / VPower & 10% meth, mapped by EngineTuner, EngineTuner Dyno


16) Blue by You - 443/428, 2005 Sti, EJ20 stock internals, SC46, Perrin FMIC, 650cc, Syvecs, 20% meth, Milltek 3" decat, RCM headers, mapped by Racedynamix, RCM dyno / (daily drive + track)

17) Kas Spec C - 442.1 bhp/400 lbft 2002 S202 (EJ20) /MD321T with 1.4b actuator, FMIC, 750cc, AVCR, EcuTek, Decat, Equal length headers, 2.5" system/Vpower/Surrey Rolling Road/Jollygreenmonster (Standard engine)

18) Ginola - 440bhp / 380lb/ft @1.6bar V-power only -2005 STI (2002JDM STI EJ20 standard Engine) MD321T, HDI FMIC, Harvey 3 bolt/ RCM Headers, 840cc injectors, 3" exhaust, AVCR, Standard ECU*
Mapped by FB Tuning

19) JohnD 436bhp 390lbft 2003 STi MDX321H 650 inj. RCM induction, GTspec headers, Harvey up-pipe, Milltek 3" AVC-R, Japspeed FMIC, V-Power only. Mapped by JGM*

20) Scooby B - 430bhp / 398lbft / Bugeye sti prodrive / Sc42 / Perrin inlet & induction / RCM 800cc injectors / RCM headers / 3" miltek / alcatek ecu / Vpower or Tesco only / EngineTuner mapped by MJ / Weekend toy with some public track days thrown in [/B]

21) T20Driver - 426bhp, 391lbft, MY05 2.0 JDM STi, Billet LM420, Hybrid FMIC, BRD Induction, 800cc injectors, 3" Miltek decat, Bob Rawle map (Base map update only as Meggarom won't activate AVCS), V Power - daily driver


22) Paulo P (Paul), 421bhp, 360lbft, 2005 sti short motor, ported and polished sti 3 cylinder heads, MD321S turbo (hence the low torque due to lag on a 2 litre), nismo 740cc injectors, 76mm inlet under a much modified version 3 inlet manifold system, tubular headers, FMIC, AVCR, Power FC, Z32 MAF + a lot more!*

23) Blocks85, 412/412 on 20% Meth, 2.0 blob Sti, Japspeed ported headers, Japspeed de cat, Japspeed fmic, RAMAIR induction kit, 650 injectors, BIG D ported VF43, 91k miles. Mapped by Martyn j @ ENGINETUNER


24) chrispy200+, 410/410 @1.4bar on V power, v5 Type R with stock EJ257, MD555 76mm inlet, syvecs / Surrey Rolling Road,*


25) Jayallen - 404 bhp / 370 lbft @1.5bar /2002 STi (stock EG20) / Andy F TD05 20G / FMIC / RCM Cone Filter / Full De-catted 3" System / Surrey Rolling Road / Duncan Graham( Was a Daily Driver)


26) Turbotits - 401bhp /370 ft/lbs - 2002 STI, 106,000 miles / AFP 18g / vpower(?) + 20% meth / 650cc inj / lateral headers and up pipe, APS CAIK / Simtek mapped by JGM


27) Pez 397 bhp /420 lbft / 2007 2.5 Hawkeye Type-UK / Original vf43/ Hyperflow Monster front mount + intake relocated to inner wing / full miltek exhaust system with de-cats and headers / hayward+scott up pipe / forge 1 bar actuator+dv / standard injectors/ vpower only / S4U Rollers - ECUTek by Bob Rawle*

28) Deathlyreaper 396 bhp /360 lbft / 05 widetrack sti / sc46 / k&n typhoon / decat afterburner / gt spec headers / Harvey uppipe / fmic / dv less / 650cc inj / vpower / apt rollers - race dynamix

29) Henrik / 391bhp / 392 lbft / 2003 WRX / td05-20g, lateral 3 bolt headers, apexi intake, fmic, decat down pipe / v-power + 10% e85 / Simon's delta dash / (track-weekend)

30) eelz - 389 bhp / 355 ft/lbs , 2003 sti ,TD 05/06 20g Harvey smith hybrid turbo,WMS s/s headers,walbro 255,fpr,550's,fmic,3 port,Harvey smith up-pipe, k&n CAIK, full de-cat, Dyno-dynamics by Enginemapper momentum 99(daily driver)

31) Sonic93 - 380bhp / 360 lbft / V3 type r sti , standard internals and box, sc40 billet,rcm cone and trumpet / adjustable fpr / lateral injectors / Harvey up pipe / gt spec 3 headers / 3 inch exhaust / evlipse intake pipe / sim tec / fmic*

32) Badger 88 - 370bhp/345lbft v-power+20% meth 352bhp/340lbft v-power MY00 uk 2000turbo classic standard untouched ej205 vf35 with forge actuator, decatted 3" open mouth downpipe, 2.5" exhaust system, cheap unequal headers, 650cc injectors, 3port, 255lph intank swirl pot inline Bosch 910, fuel lab regulator, hdi front mount, rcm k&n, alcatek ecu remapped by racedynamix
33) scoobiepaul 358bhp/394ft lb standard Litchfield T25 Spec C limited.


34) Stu.sti - 358bhp / 338lbft / 1.5bar / 03 sti / vf35 inner wing induction kit, full decat, nur spec r, walbro fuel pump / tesco 99 / delta dash (trackhound) / (weekend use, shops)

35) EqualizerCS - 355 bhp / 362 lbft / MY03 STI EJ20 / VF35 / Standard Internals / Standard TMIC / Aerys 3" Turbo-Back (300 Cells Cat) / Green Performance Cotton Air Filter / Walbro 255 l/h / Ecutek / Fuel 98 Octane / (Daily Drive)

36) the shreksta - 354bhp / 365lbft 54 plate blobeye wrx, sti long engine including avcs heads but not running the avcs yet, vf35 turbo, advanced automotive modded 11mm oil pump, rcm water pump, 650cc injectors, oem recirc valve, sti tgv delete manifold, ngkpfr7b plugs, sti top mount intercooler, silicone intake hose, rcm340 pump, rcm induction kit, rcm headers with venturi up-pipe (all heat wrapped), japspeed full de-cat 3" downpipe (wrapped), 3" afterburner center section, afterburner raptor backbox, version 6 sti 5 speed close ratio box with stage 2 organic clutch,
mapped by duncan @ race dynamix on rcm rollers and open road map tweak


37) Addi Monster - 352bhp 340lbft classic jdm impreza on standard box and lump, 16g fmic 440's with reg, GRP's rollers Dynamix map on simtek.

38) Doobs Scoob - 350.2 / 300lbft / 2000 UK Turbo (EJ20) / VF34 Hybrid / Hyperflow TMIC /VPower / Surrey Rolling Road / JGM. (Daily Drive)

39) Kedlestone - 346.9 / 320 lbft Newage WRX, Standard EJ20, Standard Gearbox, VF34, STI TMIC, Full 2.5 Decat, 550cc Injectors, Walbro Fuel Pump, APS Cold Air Induction, Simtek ECU Mapped by Pat @ SC on V-Power only. Daily Drive.

40) Tidgy - 341.4 / 315 lbft, my99 uk turbo, ppg gearbox, vf34, front mount, decat, autronics ecu mapped by scoobyclinic on v power



41) scc28 - 341 bhp / 355 lb/ft, Forester XT 2005 55 EJ25, VF41- STI ic- Full decat and 2.5" back, v-power or tesco99, Powerstation Rolling Road


42)Psycho Sport - 335/333 2005 Newage WRX. Sc36 16g Turbo, JGM remap, sti injectors, sti intercooler, sports cat down pipe, 2.5 inch system to tailpipe, ported and heat wrapped down pipes, decat up pipe. Run on VPower. Daily Drive

43) mickywrx - 329.4/289lb/ft MY94 WRX Standard EJ20, standard ECU, Standard TD05, Standard 380cc injectors, V Power only, 1bar boost, couple of bolt on's, NOT remapped. Daily driven and it's had some 1/4 mile abuse.


44) Chet123 - 323 bhp/320 lb/ft @ 1.4 bar 04 newage STI, K&N Panel Filter, 3 Port Solenoid, 255 Walbro Fuel Pump, Ported OEM Headers, Harvey Smith slip jointed Up-pipe, Afterburner 2.5" turbo back exhaust system incl. DP, Racedynamix Remap - Standard internals 550 injectors, TMIC all on V-Power

45) Wayne STI - 309.7 bhp / 300.9 lb/ft @ 1.42 bar, 2008 STI (EJ25) dual AVCS / Andy F TD05-20g / 3" Miltek turbo back (sports cat downpipe) / Japspeed FMIC & Induction / Perrin silicone turbo inlet. Block never split standard everything else. V Power only racedynamix map / PJ Motorsports Dynopack hub dyno (daily driver)
Old 14 March 2016, 08:17 PM
  #385  
mickywrx
Unmapped 12.4s @ 105
iTrader: (29)
 
mickywrx's Avatar
 
Join Date: Apr 2005
Location: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Posts: 11,776
Likes: 0
Received 4 Likes on 4 Posts
Post

Nice to see mine is still the most powerful classic that's never been remapped.
Old 14 March 2016, 08:26 PM
  #386  
banny sti
Scooby Senior
iTrader: (68)
 
banny sti's Avatar
 
Join Date: Oct 2004
Location: Type R
Posts: 16,598
Received 22 Likes on 16 Posts
Default

Wonder how many of these are still actually going or at the same spec?
Old 14 March 2016, 09:33 PM
  #387  
mickywrx
Unmapped 12.4s @ 105
iTrader: (29)
 
mickywrx's Avatar
 
Join Date: Apr 2005
Location: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Posts: 11,776
Likes: 0
Received 4 Likes on 4 Posts
Post

Originally Posted by banny sti
Wonder how many of these are still actually going or at the same spec?
Agreed.

Mine is still in the same spec, minus rusty rear arches though.
Old 14 March 2016, 11:10 PM
  #388  
The Pink Ninja
Scooby Regular
iTrader: (23)
 
The Pink Ninja's Avatar
 
Join Date: Apr 2008
Location: ...
Posts: 6,703
Likes: 0
Received 2 Likes on 2 Posts
Default

About 10 if you're lucky
Old 15 March 2016, 07:13 AM
  #389  
MrNoisy
Supporting Member
iTrader: (28)
 
MrNoisy's Avatar
 
Join Date: Dec 2006
Location: The South
Posts: 4,096
Received 7 Likes on 6 Posts
Default

Sold mine last November.
It's still going well despite a compression test that showed cylinder 3 to be slightly down (not really bad at all) - common issue with widetracks is valves; of the 3 well known engine builders I spoke to, 2 said the widetrack valves often need re seating and the rest of the engine will likely be fine.

To the poster above mentioning racing 8's on a vf35 - waste of time mate you'll Coke them up and need to replace them too often and won't see any benefit on that turbo. Stick with 7's and buy a better turbo, the '35 is horrible IMHO - way too little in the mid to top, I never found it much better than a good TD04, if I get another Subaru I'd probably opt for an 18g billet for a good all round power delivery vs lag option.
Old 04 April 2016, 04:50 PM
  #390  
SmurfyBhoy
Scooby Regular
 
SmurfyBhoy's Avatar
 
Join Date: May 2014
Location: Glasgow
Posts: 2,280
Received 77 Likes on 60 Posts
Default

Smurf - 427bhp/384ft/lbs @ 1.7bar,

V-Power, Stock ECU, JDM Spec C MAP Sensor

Owen Developments Billet SC42/GT30/76 Hybrid, RCM Induction Kit 800cc PE Injectors, Gt SpecHeaders, Harvey Uppipe, Scoobyworx 340lp/h Fuel Pump, Sytec FPR, Full 3" Decat

Mapped By Andy Forrest on ECUtek




Last edited by SmurfyBhoy; 04 April 2016 at 04:57 PM.


Quick Reply: ScoobyNet EJ20/EJ22//EJ25 ** ON Standard Internals ** LEADERBOARD



All times are GMT +1. The time now is 12:07 PM.