Engine Spec

2.2T Closed Deck Block
Nitrided crank
Custom Mahle pistons
I beam rods
625 rod bolts
14mm stud conversion
ACL bearings
Block seal kit with block bolts
Rear thrust machining
Rebore and hone
Kevlar cam belt
RCM oil pump
Windage tray
Water pump
Tensioner kit
Cosworth head gaskets
Subaru gasket kit


Head Work
JDM AVCS Big Port Heads
Cosworth Inconel +1mm Valves
Kelford cams
Head throat and seat work
Shimming, including supply and fit shimless buckets

 

Garret GT35.82
Tial 44mm V Band External Wastegate
RCM track attack kit with catch can and full pipework.
Litchfield swirl pot under bonnet mountable.
RCM Group N sump Revised version
Full RCM rotated setup.
RCM twisted turbo water supply kit
RCM twisted turbo oil drain kit
RCM VVT Oil supply hose kit
RCM head tank relocation bracket + painted header tank.
RCM black turbo header tank hose
RCM 15 degree 100mm silicone hose
100mm spun aluminium induction trumpet
Stainless hose clamp x 2
Large K&N cone filter 260mm tall
RCM black turbo outlet 2.5"

 

Spec C centre console installed tonight. OEM radio went in until I decide what I am gonna do.

 

I got the same kit on mine. 2.35 is the one to have. Look forward to the build

 

Looking forward to seeing it go ;-)

I'll let ya no wot it's like on Tuesday lol carbon boxer shorts ordered already lol

 

:-) Mint. Thanks again for last Thursday

Mine is going down to Alans next week

 

Couple of images Alan sent through of the engine

 

Custom mounting bracket for Toucan. The heater was stripped and cable ran behind. This mount sits much flusher and looks pretty subtle. Cabling ran to foot well for Martyn to wire in and configure

 

ID2000 injectors have arrived. Will definitely have overhead now to play with and be able to run a meth map with ease.

 

Defo will and billet 35 loves meth Who is going to be mapping the car?

 

Martyn after Alan and the boys have dropped the engine in, there has been a bit of head work so expecting it to pull well on vpower

 

Car's left for plymouth.

 

good luck steve

 

 

Now you'll be wearing out your home flooring as you pace up and down like an expectant father.

Lol, at least i never had to do that bit

 

Close mate, I am getting the garage floor relaid whilst its gone

 

Makes me happy I will be playing a small part in this project

 

Feel free to post pics.

 

Will do Steve

 

Nice one Steve not be long now :-)

 

car looks well mate.no point in me saying hope all goes well, as i know everything will.you'l be like a kid on xmas day when you get the car back with its shiny new motor.just make sure you have another trip down to mine to give me a go in it.

 

no probs

 

Steve contacted me after seeing TimH's vent I painted during his respray,it's a chargespeed item


He loved the style of the vent but wanted it painted like Tim's so after a few days a brand new item turned up at the workshop and prep and paint begun.
The pics say the rest






Also gave the mesh a bif of a once over

 

I have just had a crisis in my pants . thanks mate

This one's carbon so no collapsed vents in the future I hope.

 

Its now tucked up in its temporary accommodation for the next few weeks. Thanks to Alan for the pictures.

 

mmmmmmm so nice

 

Looking good Steve. The project's moving on apace now. The car's exceptionally shiny!!

 

Think Alan's lighting is being kind.

 

Looking good lads

 

Couple of updates, Engine is out, no pics though and the garage floor needs doing again, didn't make the grade. Pics to follow.