Show me your new age centre consol colours
it does look very good
Scooby Regular
Joined: Feb 2003
Posts: 7,842
Likes: 834
From: Harpenden
Figures are estimates depending on exchange rate at time and how lenient Customs are
Parts £316.00
Del £33.54
Import VAT on both £69.91
Import Duty on parts £6.32
Admin Charge £13.50
Total to pay to Japanparts £ 349.54
Total to pay on delivery about £ 89.61
From previous experiences...........
Figures are estimates depending on exchange rate at time and how lenient Customs are
Parts £316.00
Del £33.54
Import VAT on both £69.91
Import Duty on parts £6.32
Admin Charge £13.50
Total to pay to Japanparts £ 349.54
Total to pay on delivery about £ 89.61
Figures are estimates depending on exchange rate at time and how lenient Customs are
Parts £316.00
Del £33.54
Import VAT on both £69.91
Import Duty on parts £6.32
Admin Charge £13.50
Total to pay to Japanparts £ 349.54
Total to pay on delivery about £ 89.61
42000 yen was about £360 and £90 when it got to uk for vat and delivery.
got to say though japanparts are a quick service and provide good tracking info
i guess the same would go for the console as this is an s204 specific part and thats not a uk model either.
vents are going for 300 plus second hand, i paid a little extra but i know colour is correct and all brackets nuts and seals are included.
How are you getting on with your new age there ?
Cheaper way is to remove and paint, I wonder how much the eom uk silver parts are from a uk stealer ? I'm not sure if you have seen one of these in the flesh but the jap ones are not just paint its a very light rubber coating.
How are you getting on with your new age there ?
How are you getting on with your new age there ?
but on nasioc they were using these and painting the plastic with plasticoat.
http://www.subtle-solutions.com/prod...roducts_id=100
Scooby Regular
Joined: Feb 2003
Posts: 7,842
Likes: 834
From: Harpenden
From previous experiences...........
Figures are estimates depending on exchange rate at time and how lenient Customs are
Parts £316.00
Del £33.54
Import VAT on both £69.91
Import Duty on parts £6.32
Admin Charge £13.50
Total to pay to Japanparts £ 349.54
Total to pay on delivery about £ 89.61
Figures are estimates depending on exchange rate at time and how lenient Customs are
Parts £316.00
Del £33.54
Import VAT on both £69.91
Import Duty on parts £6.32
Admin Charge £13.50
Total to pay to Japanparts £ 349.54
Total to pay on delivery about £ 89.61
you cant buy a vent from a dealer in the uk as its a japan only part, believe me i tried.
i guess the same would go for the console as this is an s204 specific part and thats not a uk model either.
vents are going for 300 plus second hand, i paid a little extra but i know colour is correct and all brackets nuts and seals are included.
i guess the same would go for the console as this is an s204 specific part and thats not a uk model either.
vents are going for 300 plus second hand, i paid a little extra but i know colour is correct and all brackets nuts and seals are included.
Not true mate! Mine was ordered through a dealers just outside Edinburgh for the bodyshop thats doing the fitting work. He has had quite a few off them.
Scooby Regular
Joined: Feb 2003
Posts: 7,842
Likes: 834
From: Harpenden
The clue is in the posters name
http://www.zero-limits.co.uk/product/33061/subaru
Also helps if you've spoken to Brandon
http://www.zero-limits.co.uk/product/33061/subaru
Also helps if you've spoken to Brandon
Last edited by Don Clark; Jul 3, 2012 at 05:59 PM.
how much are they selling them for in edinburgh out of interest??
The clue is in the posters name
http://www.zero-limits.co.uk/product/33061/subaru
Also helps if you've spoken to Brandon
http://www.zero-limits.co.uk/product/33061/subaru
Also helps if you've spoken to Brandon
Scooby Regular
Joined: Feb 2003
Posts: 7,842
Likes: 834
From: Harpenden
Last edited by Don Clark; Jul 3, 2012 at 06:51 PM.
Hi guys , yes the website is work in progress and some of the parts for the Scoobies are wrapped OEM parts and done on as a customer request type order
Small update from me, stage one shall I call it complete and that is to remove the pocket and clean up and fit the data monitor.
That takes me to this....
Next step is changing the head unit, I have an Alpine to go in but need to get the ISO block first plus I need to order the red hazard switch in prep for the colour change. I have one been lucky to find one of the dash panels which I will be able to sand and paint myself to make sure I am happy with the finish I can achieve then I'll strip the other two out of the car and do the same. First step is finding which paint I need and getting that ordered as well.
That takes me to this....
Next step is changing the head unit, I have an Alpine to go in but need to get the ISO block first plus I need to order the red hazard switch in prep for the colour change. I have one been lucky to find one of the dash panels which I will be able to sand and paint myself to make sure I am happy with the finish I can achieve then I'll strip the other two out of the car and do the same. First step is finding which paint I need and getting that ordered as well.
I'm going to keep a hold of the pocket Ty as in the future I have something to drop back in as and when to release the monitor once more.
I picked up a connector earlier for the Alpine unit but after looking at spaghetti junction behind the Kenwood I'll have to wait until a mate of mine Clive is free to fit it, I'm not colour blind but my god I just as well be because I can't see for see for looking when it comes to wiring up.
I picked up a connector earlier for the Alpine unit but after looking at spaghetti junction behind the Kenwood I'll have to wait until a mate of mine Clive is free to fit it, I'm not colour blind but my god I just as well be because I can't see for see for looking when it comes to wiring up.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
