i actually feels like it spools quicker than my vf24/35!

 

I added some meth with mine and omg was it a quick road car with the rapid throttle response

 

tbo i was on about adding 20 % meth does it make much difference mate

 

yes it does.

 

Alot tbho ad,it made the mid range punch alot stronger and the spool even quicker.
Are you at the next wmi meet mate?

 

do you have the graphs from your vf48 without the meth?
would be interested to see if mine is spooling late?
what rpm does your peak?

 

it was only mapped with meth mate so unable to compare. check my thread on vf48's as there is a few graphs from different cars.

 

looking at your thread,one of the dyno graphs was without meth wasnt it,mine actually peak boosts slightly earlier as your peaks at 4700 rpm.
maybe mine isnt a little laggy lol?

 

post 83.
https://www.scoobynet.com/897731-who...2-0-sti-3.html

 

Stick a set of 550's in buddy and Im sure you will see 360+
I did running Tesco 99 ...headers next I think

 

do you have the boost graph mate?

 

Not on the PC buddy but it was just over 1.4 if I remember right
Pulls very well in all gears now

 

so you dont know what rpm made 1.4 bar?

 

I still think VF34 will be overall better bet,but that's the my view,most important thing you are happy there and this is most counts.

VF48 without the AVCS and on 2.0L seems is laggy


Jura

 

Richard - From the datalogs we recorded whilst road mapping the vf48 on your 2.0 motor I can see it hit 1bar @ 3425rpm and 1.47bar @ 3850rpm in 4th

HTH

Richard

 

This is what Simon go out of mine, it has ported heads,fmic,550's on my Bugeye Wrx and it does have a 6 speed now. And it go's very nicely

 

yes mate i will be there. will u be going

 

Richard is the man
Yes mate I'll see you there

 

I literally just bought this 1994 WRX Sti at the weekend. When you put ya toe down, the boost gauge hits 1 bar. So I assume, according to this graph, to obtain 342BHP it was running more boost when the dyno test was done? I really have no idea how to read these graphs... what can you tell me from the test results?

Cheers, Steve

 

It was running 1.4ish bar mate when the dyno was done dipping to 1.2 at the tail end

 

Got it! Cheers.

 

thanks for that rich,did you see that jolly green monster said possible uppipe or headers leak?(laggy)im 99.9% sure that is not the case,it certainly does not feel laggy at all,if the vf48 was on uk gearing then it would possibly feel a little laggy but the type r box more than makes up for it....as soon as you plant the throttle it goes with no hesitation whatsoever.its funny as i was quite impressed on how UNLAGGY it was!

 

What gear was this in?

I see 1.0bar at 3600rpm in 4th gear starting from about 20mph.

 

no...its not laggy!