MY 2011 Saloon / Hatch, show yourselves! Pics & chat
If mine stays then it's on the shopping list rather than more power so be interested to know
Joined: Sep 1999
Posts: 11,479
Likes: 27
From: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
Uprated rear anti roll bar
Revised steering feel
4 Wheel laser alignment with fast road settings
Revised sub frame and chassis bush kit
Litchfield Front Strut Brace
Labour to install
But also had the front ARB added as an extra
I left the ProR springs on at this stage but may consider going back to AST's later.
Tony
Joined: Sep 1999
Posts: 11,479
Likes: 27
From: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
Some very nice Perrin parts arrive today from scooby clinic 
hatch to saloon
Looks bit better.
Tony
hatch to saloon Looks bit better.
Tony
Last edited by T5NYW; Jun 30, 2013 at 05:38 PM.
Joined: Sep 1999
Posts: 11,479
Likes: 27
From: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
i KNOW saw the rain, jumped in the Car to put in gararge and front wheel crunch 
sorry but completely flat & fubar'd.
You could have it for £10 and use to wedge under a table leg to level it up LOL
TBH,
The i got them Both for £115 inc postage etc from www.scoobyclinic.com
I looked at buying from states $220 + £30 customs. So much cheaper.
I gave them the Perrin part numbers and KEV ordered them 
Tony
sorry but completely flat & fubar'd. You could have it for £10 and use to wedge under a table leg to level it up
LOLTBH,
The i got them Both for £115 inc postage etc from www.scoobyclinic.com
I looked at buying from states $220 + £30 customs. So much cheaper.
I gave them the Perrin part numbers and KEV ordered them Tony
Scooby Regular
Joined: Feb 2003
Posts: 7,826
Likes: 829
From: Harpenden
Scooby Regular
Joined: Nov 2000
Posts: 579
Likes: 0
Foglight covers from US
Hi
Just received a set of the foglight covers from the US (bought via fleabay) - got shafted by addition of VAT (20%) and a Royal Mail handling fee £8.
Phoned Royal Mail and apparently Customs select random parcels as they cannot check/charge for every one that comes into the Country. If you get a customs charge e.g. VAT then the Royal Mail handling fee is also applied to pay for there import facility.
Just be aware dudes if you order stuff from the US you can get these added charges - I know some have been lucky and had nothing added.
Plus side is they were still cheaper than ordering from Subaru UK
Any tips for fitting these? - do you need to remove part of the foglight surround already there?
Cheers
Den
Just received a set of the foglight covers from the US (bought via fleabay) - got shafted by addition of VAT (20%) and a Royal Mail handling fee £8.
Phoned Royal Mail and apparently Customs select random parcels as they cannot check/charge for every one that comes into the Country. If you get a customs charge e.g. VAT then the Royal Mail handling fee is also applied to pay for there import facility.
Just be aware dudes if you order stuff from the US you can get these added charges - I know some have been lucky and had nothing added.
Plus side is they were still cheaper than ordering from Subaru UK
Any tips for fitting these? - do you need to remove part of the foglight surround already there?
Cheers
Den
Last edited by Big Den; Jun 13, 2013 at 07:51 PM.
Scooby Regular
Joined: Feb 2003
Posts: 7,826
Likes: 829
From: Harpenden
Hi
Just received a set of the foglight covers from the US (bought via fleabay) - got shafted by addition of VAT (20%) and a Royal Mail handling fee £8.
Phoned Royal Mail and apparently Customs select random parcels as they cannot check/charge for every one that comes into the Country. If you get a customs charge e.g. VAT then the Royal Mail handling fee is also applied to pay for there import facility.
Just be aware dudes if you order stuff from the US you can get these added charges - I know some have been lucky and had nothing added.
Plus side is they were still cheaper than ordering from Subaru UK
Any tips for fitting these? - do you need to remove part of the foglight surround already there?
Cheers
Den
Just received a set of the foglight covers from the US (bought via fleabay) - got shafted by addition of VAT (20%) and a Royal Mail handling fee £8.
Phoned Royal Mail and apparently Customs select random parcels as they cannot check/charge for every one that comes into the Country. If you get a customs charge e.g. VAT then the Royal Mail handling fee is also applied to pay for there import facility.
Just be aware dudes if you order stuff from the US you can get these added charges - I know some have been lucky and had nothing added.
Plus side is they were still cheaper than ordering from Subaru UK
Any tips for fitting these? - do you need to remove part of the foglight surround already there?
Cheers
Den
Should always factor in VAT and admin charge so when you don't have to pay it it makes you feel good
Just unclip the existing covers and replace with the plain ones.
You'll need to drop the front part of the arch liners for access to the clips.........
Scooby Regular
Joined: Nov 2000
Posts: 579
Likes: 0
Lucky they weren't sent express or the fee is £13.50
Should always factor in VAT and admin charge so when you don't have to pay it it makes you feel good
Just unclip the existing covers and replace with the plain ones.
You'll need to drop the front part of the arch liners for access to the clips.........
Should always factor in VAT and admin charge so when you don't have to pay it it makes you feel good
Just unclip the existing covers and replace with the plain ones.
You'll need to drop the front part of the arch liners for access to the clips.........
A job for this weekend.
Den
Scooby Regular
iTrader: (2)
Joined: Jun 2012
Posts: 295
Likes: 0
From: South Essex - Grey Hatch 330S
i KNOW saw the rain, jumped in the Car to put in gararge and front wheel crunch sorry but completely flat & fubar'd.
You could have it for £10 and use to wedge under a table leg to level it up LOL
TBH,
The i got them Both for £115 inc postage etc from www.scoobyclinic.com
I looked at buying from states $220 + £30 customs. So much cheaper.I gave them the Perrin part numbers and KEV ordered them
Tony
sorry but completely flat & fubar'd. You could have it for £10 and use to wedge under a table leg to level it up
LOLTBH,
The i got them Both for £115 inc postage etc from www.scoobyclinic.com
I looked at buying from states $220 + £30 customs. So much cheaper.
I gave them the Perrin part numbers and KEV ordered them Tony
Poor c.cards going to take a pounding now 
Joined: Sep 1999
Posts: 11,479
Likes: 27
From: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
had to be the new one 
The boost valve holder looks better than the OEM piece of tin
Tony
Well the final piece of the jigsaw puzzle is now finished thanks to my mate and his spray gun!
Before
Painted
Fitted
Only thing I may do later this year is change the wheels for some S206 rims, well the closest I can get so probably BBS CH-R's in black.
Before
Painted
Fitted
Only thing I may do later this year is change the wheels for some S206 rims, well the closest I can get so probably BBS CH-R's in black.
Joined: Sep 1999
Posts: 11,479
Likes: 27
From: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
Fitted these today but have some new discs and pads to go on soon.
Expensive month this one also Tax car £440 and 24 month service £320 ISH
Tony
Expensive month this one
also Tax car £440 and 24 month service £320 ISH Tony
Joined: Sep 1999
Posts: 11,479
Likes: 27
From: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
Scooby Regular
iTrader: (2)
Joined: Jun 2012
Posts: 295
Likes: 0
From: South Essex - Grey Hatch 330S
Joined: Sep 1999
Posts: 11,479
Likes: 27
From: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
Yes taken off the standard Black Brembo's 4pots and the 326mm Disc.
These are 6 pot 360mm Discs
The Black ones are exactly the same as the gold on. 02-10 STi IIRC
I'll have to put them up for sale
Tony
Jamie shame that wasn't an Auto window closer, I want one
These are 6 pot 360mm Discs
The Black ones are exactly the same as the gold on. 02-10 STi IIRC
I'll have to put them up for sale
Tony
Jamie shame that wasn't an Auto window closer, I want one
Last edited by T5NYW; Jun 16, 2013 at 09:52 AM.
Scooby Regular
Joined: Sep 2012
Posts: 206
Likes: 2
From: Derbyshire
A really daft question but has anyone removed the warning labels from the sun visors and if so how, I can't quite see if they are a transfers or stickers but they just irritate me so would like to get rid of them...
Last edited by abre; Jun 16, 2013 at 08:15 PM.
Joined: Sep 1999
Posts: 11,479
Likes: 27
From: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
Joined: Sep 1999
Posts: 11,479
Likes: 27
From: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
Scooby Regular
Joined: May 2013
Posts: 48
Likes: 0
From: Lancashire
I've got the low level spoiler on the rear. I know the fitting diagram was posted earlier in the thread but does anyone know if the HT Autos high level spoiler will go on with the holes that will have been drilled to fit the low level one, or am I looking at a new boot lid to get the HT spoiler fitted?
My current spoiler:
My current spoiler: