MY 2011 Saloon / Hatch, show yourselves! Pics & chat
#692
Scooby Regular
Boys FYI I will have a set of 2011 stock Alloys ( as new condition no marks ) they also come wrapped with 4 nokian winter tyres with about 1000 miles on them
any of you want any MSG me please before I ebay.
Rob
any of you want any MSG me please before I ebay.
Rob
#695
Scooby Regular
iTrader: (15)
Join Date: Apr 2006
Location: Kent
Posts: 2,995
Likes: 0
Received 0 Likes
on
0 Posts
Here is the completed listing mate
http://www.ebay.co.uk/itm/2211679254...84.m1439.l2649
Cost me about £55 plus £11ish tax and duties.
http://www.ebay.co.uk/itm/2211679254...84.m1439.l2649
Cost me about £55 plus £11ish tax and duties.
Just a word of warning to all that have fitted covers over fogs, I did this to my hawk and turned the fogs on by mistake one day and it very lightly melted the rear of the cover and warped the fog cover a bit, had it been turned on for any length of time I think it would have been a lot worse, I'll therefore be covering the rear of the cover in some heatproof sheeting just in case.
Last edited by Abx; 12 April 2013 at 06:39 PM.
#697
Scooby Regular
Ordered cheers bud, wont go on for a while yet as still using the fogs!!
Just a word of warning to all that have fitted covers over fogs, I did this to my hawk and turned the fogs on by mistake one day and it very lightly melted the rear of the cover and warped the fog cover a bit, had it been turned on for any length of time I think it would have been a lot worse, I'll therefore be covering the rear of the cover in some heatproof sheeting just in case.
Just a word of warning to all that have fitted covers over fogs, I did this to my hawk and turned the fogs on by mistake one day and it very lightly melted the rear of the cover and warped the fog cover a bit, had it been turned on for any length of time I think it would have been a lot worse, I'll therefore be covering the rear of the cover in some heatproof sheeting just in case.
Do wish Subaru hadn't wired them so that to use the rear fog you have to turn the fronts on first.
#699
Scooby Regular
Or better still remove the fuse..........
Just checked - circuit FB-9 is Front Fog Relay only.
Just checked - circuit FB-9 is Front Fog Relay only.
Last edited by Don Clark; 05 April 2013 at 11:48 AM.
#703
Scooby Regular
How does the third brake light come out on these cause mine needs cleaned as its full of dust.
Some recent pics of mine
#707
Scooby Regular
#710
Small update. As i have got as far ahead as i can with the exterior I thought it time to start inside. Only a small update but I've never been a fan of the silver gear surround so thought I would try this new plastidip stuff out. Looked on the Web and they are out of stock so off to ebay and a £15 tin is now selling for £30 so thought what the hell and got a can.
Anyhow it was nice and easy to remove, so here is the offending item (forgot to get a pick fitted but we all know what it looks like)
Masked it all up, applied a light coat and allowed it to try. Then on went four heavy coats and left it to dry over night. Left it till mid day and took all the tape off with the help of a Stanley blade. I so here it is
And here it is fitted along with a genuine duracon sti gear **** as fitted to the jdm sti's. Had one on my type 25 and loved it so decided that I needed another. Any how here it all is fitted.
It's a lot darker in the flesh, the light doesn't help.
Anyway anyone thinking of using the stuff, crack on its a nice product to use. Will see how well it t fairs up yet for now I'm happy. Couple more bits due in the mail and that will be it for the inside. Will update you later
Regards
Anyhow it was nice and easy to remove, so here is the offending item (forgot to get a pick fitted but we all know what it looks like)
Masked it all up, applied a light coat and allowed it to try. Then on went four heavy coats and left it to dry over night. Left it till mid day and took all the tape off with the help of a Stanley blade. I so here it is
And here it is fitted along with a genuine duracon sti gear **** as fitted to the jdm sti's. Had one on my type 25 and loved it so decided that I needed another. Any how here it all is fitted.
It's a lot darker in the flesh, the light doesn't help.
Anyway anyone thinking of using the stuff, crack on its a nice product to use. Will see how well it t fairs up yet for now I'm happy. Couple more bits due in the mail and that will be it for the inside. Will update you later
Regards
#712
#713
Scooby Regular
#714
Scooby Regular
#716
Scooby Senior
#718
epic fail by me but.......
Guys as some know i have a 60 plate saloon with the horrible looking fake chrome boot trim which i am looking to paint. Been to halfords and they do not have the code in stock so can not mix the paint so i took to the internet to get some, Found the code, found a supplier in Germany as no one in the uk came up on the search only for chip repair so ordered what was classed as a spray can in the right colour code. it turned up today looking like this
so i assume it is in fact a spray tin but not the assumption I made as an aerosol spray tin and requires a paint gun of some kind. question is
where can i get one that does not require a full compression set up?
Or anyone know of someone in the Berkshire area that could swap it to an aerosol can for me?
any advice welcome
Guys as some know i have a 60 plate saloon with the horrible looking fake chrome boot trim which i am looking to paint. Been to halfords and they do not have the code in stock so can not mix the paint so i took to the internet to get some, Found the code, found a supplier in Germany as no one in the uk came up on the search only for chip repair so ordered what was classed as a spray can in the right colour code. it turned up today looking like this
so i assume it is in fact a spray tin but not the assumption I made as an aerosol spray tin and requires a paint gun of some kind. question is
where can i get one that does not require a full compression set up?
Or anyone know of someone in the Berkshire area that could swap it to an aerosol can for me?
any advice welcome
#720
Scooby Regular
epic fail by me but.......
Guys as some know i have a 60 plate saloon with the horrible looking fake chrome boot trim which i am looking to paint. Been to halfords and they do not have the code in stock so can not mix the paint so i took to the internet to get some, Found the code, found a supplier in Germany as no one in the uk came up on the search only for chip repair so ordered what was classed as a spray can in the right colour code. it turned up today looking like this
so i assume it is in fact a spray tin but not the assumption I made as an aerosol spray tin and requires a paint gun of some kind. question is
where can i get one that does not require a full compression set up?
Or anyone know of someone in the Berkshire area that could swap it to an aerosol can for me?
any advice welcome
Guys as some know i have a 60 plate saloon with the horrible looking fake chrome boot trim which i am looking to paint. Been to halfords and they do not have the code in stock so can not mix the paint so i took to the internet to get some, Found the code, found a supplier in Germany as no one in the uk came up on the search only for chip repair so ordered what was classed as a spray can in the right colour code. it turned up today looking like this
so i assume it is in fact a spray tin but not the assumption I made as an aerosol spray tin and requires a paint gun of some kind. question is
where can i get one that does not require a full compression set up?
Or anyone know of someone in the Berkshire area that could swap it to an aerosol can for me?
any advice welcome