Project '500-R'
I Have this one on mine, fits better too 
http://www.rogerclarkmotorsport.co.u...productID=2330
Just see it in the corner here
http://www.rogerclarkmotorsport.co.u...productID=2330
Just see it in the corner here
Cheers Banny, will do that! The engine is pretty much squared away with EngineTuner building it! I've got a few more bits to get-
Deatschwerks fuel pump and holder
Fuel swirl pot (RCM one via Advanced Automotives)
Oil catch can
Rad/fans
Pulleys
Battery relocation kit for the boot
There's a few bits
Thank you very much
Deatschwerks fuel pump and holder
Fuel swirl pot (RCM one via Advanced Automotives)
Oil catch can
Rad/fans
Pulleys
Battery relocation kit for the boot
There's a few bits
Thank you very much
Merv,
about the Fuel pump,we are running HRC 340lph without the problem at 490bhp,you should be OK too with this pump and mainly is cheaper than any pump(Bosch or Deatschwerks),Swirl pot we are sold few weeks ago with Sytec Fuel filter and 2 brackets and 2x1m braided lines for £150
and really if i know i will sell you without the problem.About the pulleys,i would have look on 22b where has been big debate about the crank pulleys,battery relocation kit should be easy
Anyway looking like good progress,love the steering wheel,great job on this
Interior with this material will look great but think will be pricey
Jura
Thread Starter
Scooby Regular
iTrader: (5)
Joined: Aug 2003
Posts: 6,517
Likes: 1
From: Mitsubishi Lancer Evolution 8 RS
I'll look into the HRC pump, I had a single Walbro running 475/460 on my old one but just need something extra so fuelling won't struggle ! I would have had the fuel setup off you too 
I did see it but it had gone by then!
Cheers Jura
I did see it but it had gone by then! Cheers Jura
Scooby Regular
Joined: Jan 2006
Posts: 2,629
Likes: 3
From: Enginetuner Plymouth for 4wd RR Mapping Apexi Ecutek Alcatek Proper Garage More than just a laptop!
I would go for one of our under bonnet swirl pot setups Merv fed by a Deatschwerks 300lph in tank pump. Feed that into a Bosch 044 and you'll have plenty enough for 650bhp if reqd.
Martyn
Martyn
Thread Starter
Scooby Regular
iTrader: (5)
Joined: Aug 2003
Posts: 6,517
Likes: 1
From: Mitsubishi Lancer Evolution 8 RS
Cheers Martyn well, you're gonna be the ones fitting everything
With the battery in the boot, there will be plenty of room for oil and fuel swirl pots under there!
well, you're gonna be the ones fitting everything With the battery in the boot, there will be plenty of room for oil and fuel swirl pots under there!
Thread Starter
Scooby Regular
iTrader: (5)
Joined: Aug 2003
Posts: 6,517
Likes: 1
From: Mitsubishi Lancer Evolution 8 RS
I Have this one on mine, fits better too
http://www.rogerclarkmotorsport.co.u...productID=2330
Just see it in the corner here
http://www.rogerclarkmotorsport.co.u...productID=2330
Just see it in the corner here
Scooby Regular
iTrader: (2)
Joined: Jan 2008
Posts: 1,447
Likes: 0
From: MY 10s blobeye 10.87@132 2.35/TO4Z next
Thread Starter
Scooby Regular
iTrader: (5)
Joined: Aug 2003
Posts: 6,517
Likes: 1
From: Mitsubishi Lancer Evolution 8 RS
Hopefully
After he mapped my old car with the S206 Billet, he'd text me to say 'It spools like a b@stard!' so with the 2.35 it'll be slightly better ! I just loved the usability of my Blob with that turbo, as it's still a 'family car with potential'
After he mapped my old car with the S206 Billet, he'd text me to say 'It spools like a b@stard!'
so with the 2.35 it'll be slightly better ! I just loved the usability of my Blob with that turbo, as it's still a 'family car with potential'
Thread Starter
Scooby Regular
iTrader: (5)
Joined: Aug 2003
Posts: 6,517
Likes: 1
From: Mitsubishi Lancer Evolution 8 RS
you like the US eBay 
Thread Starter
Scooby Regular
iTrader: (5)
Joined: Aug 2003
Posts: 6,517
Likes: 1
From: Mitsubishi Lancer Evolution 8 RS
Can't wait to see this project finished
Jura
Joined: Nov 2003
Posts: 13,356
Likes: 58
From: in the woods...........555 Wagon Sqn
Thread Starter
Scooby Regular
iTrader: (5)
Joined: Aug 2003
Posts: 6,517
Likes: 1
From: Mitsubishi Lancer Evolution 8 RS
I can't wait til it's done too
gonna be a massive weight off my shoulders, not to mention a whole lot of fun!!
come on,come on,come on,come on,come on,come on,come on,come on,come on,come on,come on,come on,come on,come on,come on,come on, come on,come on, come on, come on, come on, come on, come on,come on,come on,come on,come on,come on,come on,come on,come on,come on,come on,come on,come on,come on.
AAAAAAAAAAAAAAAAAAAAAAAAAAAHHHHHHHHHHHH COME ON !!!!!!!!!!!!!!!!!!
Not that i'm impatient at all but sheesh,hurry up i want a looksee.
AAAAAAAAAAAAAAAAAAAAAAAAAAAHHHHHHHHHHHH COME ON !!!!!!!!!!!!!!!!!!
Not that i'm impatient at all but sheesh,hurry up i want a looksee.
Thread Starter
Scooby Regular
iTrader: (5)
Joined: Aug 2003
Posts: 6,517
Likes: 1
From: Mitsubishi Lancer Evolution 8 RS
come on,come on,come on,come on,come on,come on,come on,come on,come on,come on,come on,come on,come on,come on,come on,come on, come on,come on, come on, come on, come on, come on, come on,come on,come on,come on,come on,come on,come on,come on,come on,come on,come on,come on,come on,come on.
AAAAAAAAAAAAAAAAAAAAAAAAAAAHHHHHHHHHHHH COME ON !!!!!!!!!!!!!!!!!!
Not that i'm impatient at all but sheesh,hurry up i want a looksee.
AAAAAAAAAAAAAAAAAAAAAAAAAAAHHHHHHHHHHHH COME ON !!!!!!!!!!!!!!!!!!
Not that i'm impatient at all but sheesh,hurry up i want a looksee.
calm down dear Got these in the post today
RCM340 and Bosch 044 (it's huge) and a Sytec bracket
It's a pity the RCM one won't be seen
Thread Starter
Scooby Regular
iTrader: (5)
Joined: Aug 2003
Posts: 6,517
Likes: 1
From: Mitsubishi Lancer Evolution 8 RS
Advanced Automotives are great people and really recommended
Jura
I know what you mean and really sometimes is better wait,i know from our build and really now i must say,if we finish our project like we are want,we will never have this wagon like we have now
Jura
Jura
I know what you mean and really sometimes is better wait,i know from our build and really now i must say,if we finish our project like we are want,we will never have this wagon like we have now
Jura
