Did anything come of these panels guys? Im suffering from th le dreaded rear arch bubbling, along with a few other areas, and want to get sorted sooner rather than later!

Cheers

Rob

 

Anyone??

 

Anyone??

 

How did this thread end?

Has the mould actually been done?

What did you guys-in-need do in the end?

Rob

 

Being a little impatient, I'm bumping this

 

Mines going in next month to a very well repscted amd known specialist for repairs. They will cut all affected arch areas, fabricate and weld in new panels and match to existing paintwork. Not cheap by any means, but worthwhile imo since im not planning on selling the car.

As for the others, i have no idea, im still unaware of any replacment rear arch/quarters, as somebody said on the thread, the man who fabricates and produces these as a whole will be a very rich man!

 

As these never seemed to materialise, I thought I'd bump this and see what you guys thought of my plan.

So my rear arches aren't too bad, the outer surface has no bubbling to the paint yet so I'm hopeful that's still clean metal, it's just the inner lip underneath that the front edge of the rear bumper fixes to has rusted resulting in the bumper dropping slightly leaving an unsightly gap

I'm trying to think of an immediate repair that won't involve a complete respray of quarter panel as that will escalate the cost massively. I had thought of fabricating a new lip to support the bumper, grinding any other rust away and soaking in kurust then painting and waxoyling. Obviously this is going to all be visible along the edges of the arch from outside the car, so I thought a set of these:

http://www.ebay.co.uk/itm/SUBARU-IMP...item3cc98588a1

Colour coded just to cover up the remaining untidy looking edge would do in the short to medium term?

All this is assuming I don't get stuck in with the dremel and end up with a rear quarter like in the pictures posted on page 2!

 

I have given up to this idea, or any other ideas regarding fixing the rust issue for that matter, as when I started putting prices together I couldnt get the work I wanted for under £1500. Thats replacement panels or ABW, installtion and paint done properly. So for that reason Ive going to re-shell the car soon.

Rob

 

Depressing when you put it like that Looks like something with as little value as my 1997 Turbo 2000 realistically has only got a few years left before it's only good for scrap. Starting to regret spending out on a clutch and cambelt kit for it now

 

Thought Id bump this thread!!

My dad has a 52 plate bugeye WRX and 1 arch seems to have some bubbling on 1 side, He has asked me to get some quotes for this to be done, but not sure what needs to be done or if anyone has had it done, and who to do it???

Any advice?? Car is mint 70k mile from new and no dents, paint is mint etc, full service etc, and he has owned it for the last 5 years, so he does not want to scrap the car if he can help it!!!

 

My mate was going to repair his classic rear arches with front arches, but checked out the price of new rear quarters from Subaru and they have dropped dramatcially since he last priced them (probably becuase they are making thousands of them ). He has since purchased a pair and is currently chopping his car up to fit them (he runs a bodyshop).

I am seeing him on Wednesday so will find out what he paid for them and see how the work is progressing.

His is a 1997 and he said there was a lot of corrosion to the inner wing and rear jacking points when he started uncovering it.

 

surrey somebody makes these

 

Went to see my mate yesterday, but he had a customer with him so wasn't able to get an idea of the price off him, but will ask him soon enough.

What I did do while I was there though was have a look at his Scoob which is all stripped down now ready for the work to begin. It's a UK car supplied new to him in 1997 and had every bodywork inspection (all stamped in the book).

I am saying that to illustrate that it has been well looked after because the amount of rust on the inner wheel arches and the rear part of the sills/jacking points is horrendous. When the car was on the road it looked like just a bit of surface rust on the arches, but what is actually behind it is very bad indeed.

He is putting new quarters on as I said so it will all be fixed properly, but as he said patching up is not an option on his car anyway. It's that bad!!!

What I wonder is how many classics are driving round with their owners thinking they are rust free yet underneath is a whole shed load of trouble waiting to appear.

 

Most of them I reckon!

 

That's the very reason I gave up Chris. The amount of "clean metal" useable was quite a large way away from a simple repair, thus the decision to ABW arch it, or forget it! The last straw was when it was on a ramp, the underside was terrible, and the cost justification just simply isn't something I wasn't prepared to do

 

Look forward to finding out the costs of the rear arches from Subaru
I'm sure many people won't mind spending a couple of grand to keep
Their beloved classics on the roads

 

Right just spoke to him. Parts prices for rear quarters

One side is £326 and the other is £348, the difference presumably being because of the fuel filler aperture. Some dealers will quote a different price, but that is the official price and what he paid from Mangolets. They used to be double that!

That said it is a massive job, I would guess a minimum of £2K so unless you really know what you are doing and can do the work yourself it's not really economically viable.... that said since when did that matter with Scoobs

 

And the rest, IIRC they were over a grand each.

 

There's a recent thead on here somwhere in the last month or so, (cant bloody find it though) and somebody had responded by putting an ebay link which had pretty much a complete rear quarter , selling for around £170 odd a side. Looked very descent to me, anybody got the link or seen the ones im on about?

R

 

£700 a pair
They should sell ok at that price
Should save a lot of work for the body shop if they literally bolt/weld on
I'm sure someone will post up some pictures and descriptions of how easy they are to fit

 

I have asked my mate to take some pics when he does it, but he said it isn't a simple job that's for sure.

 

Yeah they were cut out of cars being broken if it's the same link. Trouble is you could be buying a bag of trouble. If you're going to go to the trouble of doing such a big job you may as well use new parts.

 

Completely agrree, pretty sure they were brand new made to order jobbies though. Wish id saved the link now.

Havent had mine done just yet, bodyshop are flat out at the moment. Hopefully when done (as theyll be done proper) theyll last for a good 10 years or so .

 

Sorry mate, must have been a different link that I saw.

 

A few days ago I made a wheel arch for a Subaru Legacy.







The owner of the car is very pleased with the quality.
If someone has any interest I can make a wheel arch for Legacy or Impreza.
More info on pm.

Senad.

 

They look good.

What sort of price would they be?

 

150 euros for a piece + shipping

Senad

 

Are people still having trouble repairing these arches? I have repaired quite a few now as I have sourced an identical steel replacement arch. If anyone is after the repair with brand new steel replacement arches please get in touch for pics, pricing etc...

Kurt - H&G Bodyshop

 

what sort of price for panel alone m8
thanks
iain

 

As I am not here to make profit I can explain to you how I carry out the repair if you like.

Basically I order in a set of brand new impreza front wings from the same model, which most people do not believe. Then the most important thing to know is the n/s front arch is cut away from the new wing and is fabricated to fit the o/s rear quarter. And o/s front arch is fabricated to fit the n/s rear quarter.

I will post pics of this procedure just to show the final outcome. You would need to find a competent fitted to do this properly as it's not a simple job to get perfect.

I have carried out this repair to both 4-door and 2-door imprezas and final outcome is 100% authentic.

If you have any questions please let me know.
Kurt - H&G Bodyshop