My classic STi RA refresh/track project
Don't want to highjack your thread but here are a few pics of mine. New wheels on now though.


All the stuff I have done is underneath so can't see it but it makes a big difference.


All the stuff I have done is underneath so can't see it but it makes a big difference.
We just done a mates roof on a white classic at the weekend and looked great! Got the material from Carbon Vinyl
Took half a day hol today as my friends garage was quiet si got to use the ramp and power tools so thought I might aswell get the coilovers on!....

Not sat as low as I hoped but still needs adjusting...


Plus fitted the new facelift grill and type ra badge...

Drew

Not sat as low as I hoped but still needs adjusting...


Plus fitted the new facelift grill and type ra badge...

Drew
Finally got all the arches fitted today and managed to get the tyres fitted to the new wheels and couldn't resist getting them on the car...
Pic to show how wide they are with arches off...


With all arches on...

Quickly sat the spoiler on and rear lights in to see how it will look as still waiting on the light trims from the paint shop...

Drew
Pic to show how wide they are with arches off...


With all arches on...

Quickly sat the spoiler on and rear lights in to see how it will look as still waiting on the light trims from the paint shop...

Drew
Joined: Nov 2003
Posts: 13,356
Likes: 58
From: in the woods...........555 Wagon Sqn
After a set of Alcon callipers with 2 peice Godspeed discs and ferrodo pads fell into my lap for a very very reasonable amount, I decided to sell the ap's and put the difference back into the project as am trying to keep costs minimal.
Calipers and bells were looking a bit sorry for them selves...


I decided to have a go at giving them a make over. Now I know these may not be to everybodys liking but love the look of red calipers just as my ap's where, so out came the red paint...

And the rotors done in silver...

Then re did the prodrive logos in white with a blue line...


I really like them!...
Drew
Calipers and bells were looking a bit sorry for them selves...


I decided to have a go at giving them a make over. Now I know these may not be to everybodys liking but love the look of red calipers just as my ap's where, so out came the red paint...

And the rotors done in silver...

Then re did the prodrive logos in white with a blue line...


I really like them!...
Drew
Bonnet pins fitted tonight...


Plus lads came to carbon wrap the roof...

All done, rubbish pics sorry...



Also had the lip of the v6 spoiler done aka P1 style, but not sure if it will stay...

Drew


Plus lads came to carbon wrap the roof...

All done, rubbish pics sorry...



Also had the lip of the v6 spoiler done aka P1 style, but not sure if it will stay...

Drew
The cheap wrc style seats I got turned out to not be suitable and when I was offered this cobra seat for £40, I snapped his hand off. It will put me on till I order a new pair of cobras.
To keep costs down again I decided to knock up a pair if subframes to suit myself and just utilise the existing subaru sliders, after some measuring, drilling, cutting and swearing it's in plus the harness ...

Then the brakes, added some braided lines all round too and changed the fluid...

With wheels back on...

Also got the front and rear whiteline arbs fitted and rear drop links.
Tomorrows job, RCM headers and uppipe, spoiler on, then just the door cards and dash to rebuild!
Drew
To keep costs down again I decided to knock up a pair if subframes to suit myself and just utilise the existing subaru sliders, after some measuring, drilling, cutting and swearing it's in plus the harness ...

Then the brakes, added some braided lines all round too and changed the fluid...

With wheels back on...

Also got the front and rear whiteline arbs fitted and rear drop links.
Tomorrows job, RCM headers and uppipe, spoiler on, then just the door cards and dash to rebuild!
Drew
Good progress today...
RCM headers and uppipe on, 22b bonnet vents fitted, ominous directional splitter tie bars installed, plus even had time to service it.
Here's some teaser pics...




I am really pleased with it, looks so menacing!
Drew
RCM headers and uppipe on, 22b bonnet vents fitted, ominous directional splitter tie bars installed, plus even had time to service it.
Here's some teaser pics...




I am really pleased with it, looks so menacing!
Drew











