cheers

 

Just airfilter and engine complete.
Was going to get Pat to look after mapping and race support but just can't get hold of him on a regular basis. Heard alot of good things about simon and he is getting good results on lots of subaru's so I will be giving him a bell soon to sort out a start up map and when I get the bumper back (hopefully this year ), I can get the mapping done.

 

What about using zac at mocom. Only down the road from you. Mocomracing.com

 

i'll take a look, trouble is he started doing it so don't know where I stand

 

Give Simon a ring, can highly recommend him after he did mine.

 

what rods are you using?

 

infact what is the engine spec?

 

subscribed:

Excellent read up, keep it coming mate

 

Bumper mould complete and I should have a bumper with me friday.

Full spec details can be found here http://www.magnumperformance.co.uk/?page_id=60

Well that should be all probably missed a few things

 

Very nice, I like the breather tank, Ive never seen one that size or shape.

 

Yeah I wanted to keep it mounted around heat so that If I need to return oil to sump it will stay like oil and not go to creamy gunk, thats the idea around it anyway.

 

Good a few updates for you all,sorryfor the delay been a little busy with other stuff, but got her started at last so nearly ready for engine to be run in.

Exhaust way to loud though so will have to look at other option hopefully just a silencer swap






Will be selling these bumpers as well
Completed engine bay


O and some new brakes to cope with those late lungs into the corners to pass the competitors

 

some impressive looking disks!!!

what paint is on the calipers??

 

Meant to be black high temp stuff but it don't like brake fluid, might be better once brakes get upto temp and bakes on

 

jesus that is some car

 

Wish I could afford to do a build like this :-(

 

Thanks for the comments guys should be out on track by the end of next month, so will give a write up on first outing.

New silencer turned up today so hopefully that will quieten it down

 

wow this looks awesom. it looks like you are going to race this if so ive noticed a niggle with the seat monts i may be wrong but id hate for you to get it to a race and have it fail scruiteneering. If you check the MSA blue book the ends of the seat tubes should have a spreader plate 3mm thick with a cetain square cm area to stop them ripping out of the floor in a shunt. I looks like yours havent. if im wrong then im wrong if not i may save you alot of time money and embarasment on the start line. Hope this helps.

 

I would hope they are ok as Custom Cages done them, will have a closer look 2mo.
Thanks for pointing it out though

 

Nearly blingy as mine!

Gd to speak to you yesterday Daz - hope to see it in the flesh very soon!


Jag

 

just read this thred fu6k me wat a car and blimy you must have some deep pockets.

 

No worrys anytime

 

Thanks a lot , not anymore

 

you would have hope they already covered it then. it probably on the othere side of the shell skin or the ends of the tubes meet the area require ment? My cage is made buy them and i no they know there stuff so it probably ok.

nearly mat blacked mine but i couldnt bring my self to spoil the v ltd blue. so im just having a few mat black highlites.

any how a cool build non the less, get some photos of it up in action.

 

Had a look today there isn't no surround around the tubes that are welded to tunnel but is on other side, is that what you meant ?

 

yup, the tubes will probably go through and out the other side and then re-enforced on the back side, glad to hear its ok id hate to see a good project altered. so late along the line. I chose custom cages to had good experiaces with them. I fitted mine in house tho.

here are my load spreaders, these are front side i did it this way so i could drop as low to the floor as poss, im 6ft and my sholders are just below the door line in the race seat

 

I will check under car and see, can't say I have noticed them though, may have to get welder out then

 

you need a copy of the msa blue book it will show you how to do them you could end up modding them and still not be in the ruels! I should think custom cages did them corectly tho. as they will have got thousands of car through the regs.

 

also these are not custom cages mounts we make our own ones. so its just my interpretation of the rules every ones will be different.

 

I have a few more pics updated on my site and I have started to run it in now so shouldn't be to long before I can get back on the track

http://www.magnumperformance.co.uk/

cheers all