The new car...
lovers tiff coming on
Update:
De-stickered boot.
Half interior strip including boot lining.
Headunit removed.
17" Advan Racing RG's fitted.
Carbon mirrors.
Whiteline 22mm rear ARB fitted.
Whiteline wire type rear drop links fitted.
Eibach rear camber bolts fitted.
Whiteline ALK fitted.
To be done before Uxbridge Auto Show
Wheel refurb and new rubber. Done
Wheel nuts. Done
Alignment. Sort of done
New (standard) discs and pads all round.
Exhaust. Done
Full machine polish. Done
Fit replacement RA sticker. Done
Maybe some kind of swirl pot setup to reduce fueling issues during enthusiastic cornering
De-stickered boot.
Half interior strip including boot lining.
Headunit removed.
17" Advan Racing RG's fitted.
Carbon mirrors.
Whiteline 22mm rear ARB fitted.
Whiteline wire type rear drop links fitted.
Eibach rear camber bolts fitted.
Whiteline ALK fitted.
To be done before Uxbridge Auto Show
Wheel refurb and new rubber. Done
Wheel nuts. Done
Alignment. Sort of done
New (standard) discs and pads all round.
Exhaust. Done
Full machine polish. Done
Fit replacement RA sticker. Done
Maybe some kind of swirl pot setup to reduce fueling issues during enthusiastic cornering
Update:
De-stickered boot.
Headunit removed.
17" Advan Racing RG's fitted.
Carbon mirrors.
Whiteline 22mm rear ARB fitted.
Whiteline wire type rear drop links fitted.
Eibach rear camber bolts fitted.
Whiteline ALK fitted.
Wheel refurb and new rubber.
Wheel nuts.
Alignment. Done properly thanks to FBtuning
New (standard) discs and pads all round. Front done, rears not. In need of some better pads, or better brakes generally
Full decat with open neck down pipe and modified TSL group N system.
Fitted replacement RA sticker.
Maybe some kind of swirl pot setup to reduce fueling issues during enthusiastic cornering. Not done yet and needed more by the day, hence soon to be on order
Exedy pink clutch and skimmed flywheel fitted by FB.
Driveshaft oil seal replaced by FB.
Gear and diff oils changed by FB.
Replacement gear linkage section to cure the slop, fitted by FB.
A level of filth not previously seen on a monkey owned car, other than the landy.
So currently planned:
Bluestuff pads all round.
Swirl pot and Bosch 044(or similar) setup in the boot using the walbro as a lift pump.
Either new struts and springs or coilovers if I can find some that will give me enough travel.
Suspension bushes.
De-stickered boot.
Headunit removed.
17" Advan Racing RG's fitted.
Carbon mirrors.
Whiteline 22mm rear ARB fitted.
Whiteline wire type rear drop links fitted.
Eibach rear camber bolts fitted.
Whiteline ALK fitted.
Wheel refurb and new rubber.
Wheel nuts.
Alignment. Done properly thanks to FBtuning
New (standard) discs and pads all round. Front done, rears not. In need of some better pads, or better brakes generally
Full decat with open neck down pipe and modified TSL group N system.
Fitted replacement RA sticker.
Maybe some kind of swirl pot setup to reduce fueling issues during enthusiastic cornering. Not done yet and needed more by the day, hence soon to be on order
Exedy pink clutch and skimmed flywheel fitted by FB.
Driveshaft oil seal replaced by FB.
Gear and diff oils changed by FB.
Replacement gear linkage section to cure the slop, fitted by FB.
A level of filth not previously seen on a monkey owned car, other than the landy.
So currently planned:
Bluestuff pads all round.
Swirl pot and Bosch 044(or similar) setup in the boot using the walbro as a lift pump.
Either new struts and springs or coilovers if I can find some that will give me enough travel.
Suspension bushes.
Hold fire on the swirl pot as I'm in the middle of organising a group buy on Oil catch Cans & Im gona get you a Swirl pot with my catch can. I owe you one for fitting my BC's & exhaust welding mate 
Thread
Thread Starter
Forum
Replies
Last Post
Mad Max
ScoobyNet General
25
May 23, 2001 02:01 PM