like it

keep up the good work lads.

 

 

I think it looks awesome!

 

very nice

 

mmmmm that looks quite cool mate

 

Very Nice keep it up lads.........

 

Right I've just ebay'd your 2.35 engine clive I put it on a buy it now for £3.50 needless to say it went quite quickly.

I wonder what I could get for the gearbox and turbo

 

come on daz you know you want it as your avatar now lol.

 

Mar indeed, its what I will be aiming for weather permitting!

Agree with prior testing part. Picked mine up yesterday with sleepersy and boy am I gonna have to carry out some practice with that clutch of mine before Mar '11....rattle rattle....stall....rattle rattle stall!! Not quite use to it shall we say!

Your project is looking very good and do like the theme of decals/colours!

 

Good to hear your car was ready for collection JP Pleased with it?
What mods did you opt for in the end ?

 

Looks good

 

nice variation on the RCM theme...perhaps some yellow rims though?

 

Love it.

White cars. FTW.

 

I managed to finish building the long engine today and I've also managed to time it all up too.

 

very nice

 

Not quite finished yet as final mapping still to follow, hence my visit to Paul (Zen) yesterday following collection. But overall am pleased with it - it keeps bloody growling all the time as if it wants to bite the car in front!!

Re final choice of mods.....will pm you as not fair to hijack your thread

 

Nice work Daz, you do all the timing of the verniers too ?

 

daz, how did you get the rocker covers finished like that mate they look very nice.
awesome project btw

andy h

 

Andy- VHT wrinkle finish black. Available in a rattle tin.

 

Haven't got as far as that yet Clive I've just set them up standard for the moment . I'll address the fine tuning stuff in a week or two I just want it all together at the moment.

 

andy h
http://www.frost.co.uk/item_Detail.a...%20%28310ml%29

 

Daz,

Neat work

 

Read all 19 pages and some of the P1 stuff, loving the work so far guys.

Top work Daz.

Shame to think the build has or is likely to blow open the 25k mark, would have been a good marker for future builds..

Good luck and keep up the quality in-depth updates.... makes very interesting reading.

Rob

 

UPDATE:

A majority of P2 has now been purchased (thank god).
With business as bad as what it is, projects like this don't mix to well !

Only a few bits & pieces left now.
Daz will be briefing you within the next two days of some changes that will result in more power.



For those of you that are interested, this is the current list to date.

(Everything purchased)
No particular order due to spreadsheet format copied from.





SHELL

STi 4 1998 RHD lightweight 2 door Type R shell

Custom Cage fully welded Int. group N T45 cage
strengthened strut tops
strengthened flitch plates
double skinned cills
Alloy firewall
seat rails
doors with electric mirrors/glass with safety film
Alloy bonnet facelift (SOLD)
STi8 Scoop / bonnet pins & lamp pod fasteners
boot with V6 STi spoiler,
polycarbonate quick release side windows,
laminated front screen
rear tinted screen
WRC roof vent
modified wings to take 18" wheels
sump guard mounting points
front/rear bumpers
facelift grill
lights
modified heater
crossmembers
dash
modified steering column
STi wiring loom with DCCD
dash clocks/DCCD
tank(no pump)
wipers
Walbro uprated fuel pump/
spec C intank pick up,
braided aeroequip fuel lines
Fuel pressure regulator(fuel labs) with pressure gauge FEV
GTEC FIA approved electric plumbed in fire extinguisher system
Red top battery/battery box/
Electric cut off switch and all wiring Bias
Pedalbox/hydraulic handbrake and all braided hoses
Aluminium Bonnet
Reverse Bonnet Scoop
Subaru V5 front bumper
RH Carbon Door card
RH Carbon Rear 1/4 cardLH Carbon Door card
LH Carbon Rear 1/4 cardCobra Competition Seat
Cobra Competition Seats seat railsMomo Steering wheel boss
Momo Suede steering wheel
Momo steering wheel boss
Seat Belts 3" 6 point harness
Flocking of dashboard (to be done)




ENGINE and TRANSMISSION

Used EJ22 closed deck block, stripped, cleaned,
2.5lt STI 79mm crank
Lateral/Wiseco custom 2.35lt piston kit, with up rated pins
Custom ceramic coated piston crown, and low friction skirt
Lateral/Crower "H" section stroker rods,
Cosworth multi layer steel head gaskets (pair) 1.1mm
Roger Clark 14mm head stud kit
Modified 14mm block dowels
ACL “Race series” main bearings, phase 2 (set)
ACL “Race series” centre main
ACL “Race series” big end bearings (set)
Cosworth Kevlar timing belt
Engine build parts, oil filter, etc’ (subject to final spec’)
Fuelab 1000bhp pump
Fuelab billet filter
Exedy twin Plate Clutch (6 speed)
Group N Engine & gear box Mounts (set of 3)
Syvecs S6GP, connector, & pins,
Garrett Hybrid GT35 (Billet wheel) Turbo
Turbo Kit /up & down pipe / 38mm w/gate / all ceramic
Ceramic Coating of Exhaust manifold
Ceramic coating Tubular Manifold
Hybrid GT3 Inter cooler
RCM Super-Light Pulley set
RCM Track Attack Oil Catch Tank Kit (With Drain Back)
STI Pink Trailing arms Spherical Brg
Stud for starter motorRH Rocker Cvr Gasket- to confirm
Rocker Bolt Seal
Samco Hose Kit Heater Matrix
Samco Hose Kit top & Bottom Rad Hose
Spark Plug Gasket - to confirm
Tensioner
Tensioner Idler
Three Bond Grey Sealer
Timing Belt Idler
Toothed Engine Idler
Uprated 78 Degree Thermostat
Used Tensioner Bracket
V3/4 Coil Pack New
V3/4 HT Lead 2
V3/4 HT Lead 3
V3/4 HT Lead 4
Water Pump Gasket
Water pump seal
Water Transfer Seal
Male / Male Dash 4 take off Boost control
Nut for starter motor
Oil Cooler Modine
Oil Filter
RCM Cool panel Guide
RCM Thermostatic Oil Cooler KitRCM Bucket Shim Head Conversion
RCM Combustion Chamber Conversion to 97mm bore
RCM Double Valve spring set
RCM Double Valve spring Spacer
RCM GRP Reversed Bonnet vent
RCM High Lift Camshaft clearance conversion
RCM Manifold fitting kit
RCM Modified 10mm Oil Pump
RCM Rear thrust conversion
RCM Team Ice Big Port Conversion (With ST Valves)
RCM Titanium Retainer
RCM Tubular Manifold- Unequal length-
RCM V3/4 High Lift Camshaft Kit
RCM Vernier Cam pulleys V3/4 Steel
RCM/K&N Induction Filter
Rear Crank Oil Seal
Rebore block to piston (Clearance to be confirmed).NGK Running In Spark plug
Oil Filter
Oil pick up O ring
Orange Block O ring
RCM 100mm Induction Hose
RCM 100mm Induction Trumpet
RCM 14mm Head Dowel
RCM 14mm Head stud kit
RCM Aftermarket Timing Belt kit V1-2-
RCM Baffle sump Dash 8 Return
RCM Bronze Exhaust Valve guide- With Option A
RCM Garret GT35 Turbo 0.82 ExhaustLH Rocker Cvr GasketCosworth Baffle Plate
Cosworth Timing Belt
Front crank Oil seal
Genuine Subaru Water pump
Gudgeon Pin Seal
Half Moon Seal
Head Drilling for 14mm stud kit
Head Face Skim
Head Gasket 97MM Bore to be confirmed
Inlet Manifold Gaskets
Inspection O Ring sealAlloy Boost take off
Block breather EJ22
Engine Bucket Shim
100mm Stainless steel Induction Hose Clamp
14MM Stud conversion
3" Exhaust Gasket
6 Speed DCCD Gear Box-Prop-Linkage
Reverse Bonnet Scoop
BC ER Coil Over Set
Block Case Dowety Seal
Block Face Skim
Block O ring
Frosts Crinkle Paint (black)
16 ft Brian James Amax trailer

As previously mentioned the budget has expired. +15K will complete the car.

Shell booked in for Sept 1st for the paint.

Looking forward to jumping in this bugger

 

Very nice job with the car.

 

what u doing with p1 these days, project is def taking shape now

 

Thanx Geoff


hhh: P1 is finished now. We could have carried on and gone for silly power but as my everyday car 562 Bhp is enough to be honest. There will be cars out there that are quicker in a straight line, but from A to B there would be very few.
Was introduced to the owner of a new Ferrari 460 a few weeks ago.
Took him for a spin and when we parked up he shook my hand and said "different league sir".

I have a real good crack with the bikers now. Good bunch of guys that always show respect.


Most recent pics a couple of weeks ago

 

You passed again Clive while I was sitting outside Hilden Manor on Saturaday afternoon 2 weeks ago, you must have been driving back from the clinic again

 

such a niced spec p1 and so mint, fairplay to you for teasing the bikers, whats it like against a big r1

 

great spec list clive only 3 HT leads though ?????????? lol