Turbo 2000 refresh
#276
Scooby Regular
iTrader: (5)
Join Date: Jan 2010
Location: Ossett
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
I don't know if anyone as asked you this (if they have sorry for the repeat question) but what spray gun are you using? my cheap old Sealy suction gun as just given up the ghost and I'm wandering what to replace it with, it's been OK but I'm thinking a better quality make such as Devilbiss or Sata may be worth while, so given the HQ finish you've achieved I'd be interested in whether it was obtained with a pro gun or a DIY type.
I realise prep is the key to a good finish but the gun does play a small part, and I need all the help I can get !!!
I realise prep is the key to a good finish but the gun does play a small part, and I need all the help I can get !!!
Last edited by budd; 09 September 2010 at 11:31 PM.
#277
I don't know if anyone as asked you this (if they have sorry for the repeat question) but what spray gun are you using? my cheap old Sealy suction gun as just given up the ghost and I'm wandering what to replace it with, it's been OK but I'm thinking a better quality make such as Devilbiss or Sata may be worth while, so given the HQ finish you've achieved I'd be interested in whether it was obtained with a pro gun or a DIY type.
I realise prep is the key to a good finish but the gun does play a small part, and I need all the help I can get !!!
I realise prep is the key to a good finish but the gun does play a small part, and I need all the help I can get !!!
#283
Ha, not been here in a little while!!
Small update, have finally got round to getting some later headlamps! I had a small issue that meant one had to be split to sort it, so I decided to paint the shroud black on them both whilst they were apart
Looks so much better and I can actually see where I'm going in the dark
I'm in the middle of two projects to go on the car, so hopefully some updates soon
Small update, have finally got round to getting some later headlamps! I had a small issue that meant one had to be split to sort it, so I decided to paint the shroud black on them both whilst they were apart
Looks so much better and I can actually see where I'm going in the dark
I'm in the middle of two projects to go on the car, so hopefully some updates soon
#287
Big boy, who've you been talking too?
Black crystals are on my wish list......... its my birthday in March if anyones looking for an idea for what to buy me
Got some of these before xmas
so stripped them to bits
Only had two seized pistons so not too bad.
Just finished stripping and painting them. Got some SS pistons and seals from godspeed so will hopefully start popping them back together later
Black crystals are on my wish list......... its my birthday in March if anyones looking for an idea for what to buy me
Got some of these before xmas
so stripped them to bits
Only had two seized pistons so not too bad.
Just finished stripping and painting them. Got some SS pistons and seals from godspeed so will hopefully start popping them back together later
#288
Unmapped 12.4s @ 105
iTrader: (29)
Join Date: Apr 2005
Location: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Posts: 11,776
Likes: 0
Received 4 Likes
on
4 Posts
I've got a spare driver's side black crystal side light.
You'd just need to find someone that crashed the drivers side for a spare passenger one.
You'd just need to find someone that crashed the drivers side for a spare passenger one.
#295
Well after LOTS of cleaning and wire brushing, followed by a lick of paint, my four pots now look like this
Just need to build them back up, I have 8 brand new stainless pistons and a new seal kit courtesy of Ian at Godspeed
Discs, which came with kevlar pads, also from godspeed
Hoping to get the fronts on at the weekend
These came today, rear two pots and a spare set of front four pots (bargain price) which I'm going to refurb and put on wifeys car to save having it off the road! Rears will be finished as per my fronts.....