£69.99-£74.99 SUPERHIDS SLIMLINE HID GB - CHEAPEST EVER!
mine are in and seem to be working fine, see how good they are tonight!
couple of comments though:
no fitting guide included - some people will struggle
use an all weather fuse holder especially as the washer bottle is right next to where these are fitted
provide some sort of rubber sock to blank off the un-used bulb socket (for H4 fit)
put a rubber sock on the HID plug that plugs into the bulb socket.
provide better quality cable ties - 2 broke as soon as i started to pull them through.
with these points addressed i think you would have the dogs danglies HID set
couple of comments though:
no fitting guide included - some people will struggle
use an all weather fuse holder especially as the washer bottle is right next to where these are fitted
provide some sort of rubber sock to blank off the un-used bulb socket (for H4 fit)
put a rubber sock on the HID plug that plugs into the bulb socket.
provide better quality cable ties - 2 broke as soon as i started to pull them through.
with these points addressed i think you would have the dogs danglies HID set
My two pence worth...great brightness and worth the money. Not quite plug and play, but close. Time for install about 2 hours for HID's and LED side lights, which means taking out the head lights (I have a Hybrid FMIC too).
A few pics:
Ballast installed behind and under nearside light
The black crimp was too small as supplied:
Wider crimp crimped on:
Still a bit loose, so I used the pliers. The electrics pos and neg were **** about face.
Taped up and safe:
Btw, if you are taking out the head lights, take off the front grill, take out the back clips all along the top of the front bumper, which makes life easier when angling the headlights out. There's three bolts on each headlight, two on the top and one behind the front bumper which locks through some white platic mount.
I think you need electrical tape to make sure there's no exposed electrics and perhaps Bobs could supply some wider crimps if all Blob Eyes are the same.
The side lights twist out.
Like I said though, well worth the money
Anders
A few pics:
Ballast installed behind and under nearside light
The black crimp was too small as supplied:
Wider crimp crimped on:
Still a bit loose, so I used the pliers. The electrics pos and neg were **** about face.
Taped up and safe:
Btw, if you are taking out the head lights, take off the front grill, take out the back clips all along the top of the front bumper, which makes life easier when angling the headlights out. There's three bolts on each headlight, two on the top and one behind the front bumper which locks through some white platic mount.
I think you need electrical tape to make sure there's no exposed electrics and perhaps Bobs could supply some wider crimps if all Blob Eyes are the same.
The side lights twist out.
Like I said though, well worth the money
Anders
Well worth the money.
Anders
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
