I've done the void on the diff carrier, plus group n mounts on the engine and gearbox, but I don't want refined.

 

I would 👍

 

My Type R has a multitude of bushes, including TOTALLY soild (ALU) dif bushes, and i have fitted soo many to so many VARIANTS to my many Scooby's.

So my comment was off the cuff off that

 

I had the void filling PU whiteline parts fitted early on in my hatch's life ( one side only, apparently to avoid excess NVH ) and found them maybe NOT hard enough and maybe both should have been done.

Subframe bushes done too, and lateral links. And all front wishbone etc with powerflex black.

 

Hi Guys

I'm looking for a set of uk sti quad avcs heads for 08/09 hatch.

Thanks
Donie

 

Does anyone know what size the thermostat housing 10mm bolts are? One was seized, so I'm stuck on the driveway. Just hope I can grip the stump but its very corroded

 

Dont know about the thread size but ive been using these for years to grab hold of any thing thats left.

Very effective in the right hands

 

M6 x 1.25. use heat to get it out, & if you can get any Wurth Rost Off its magic stuff.

 

Thanks Lockheed and Paul. I may be able to grip the stump with mole grips or bite into it with electrical side snips, and I'll get some heat on it. There isn't enough for Stilton unfortunately. Life under the car isn't so easy since those busted vertebrae!

 

quick question chaps, seat covers for 330s seats what is everyone using, I have a set of newage covers but dont reckon they will fit over the bolsters plus airbags to think about

 

Anyone? surely some of the other 330s owners have seat covers?

 

Loads of seat covers on eBay. I did have some in mind for mine which were more of a genuine product but i discounted them on cost in the end and on a quick look i can't find the link.

Maybe these https://www.capitalseating.co.uk/protective-seat-covers

 

Thanks Matt, an idea if they cause issues with the airbags in the seats?

 

Hopefully they wont be going off

 

haha very true, thanks for the link I will contact them and see which they recommend to be close to the 330s seats

 

Cool, let us know the outcome, i was thinking the "Trendline" but not sure.

 

The recaros are a variation of the Recaro SR seat so these covers would be a better fit

https://www.capitalseating.co.uk/rec...e-seat-cover-2

 

Capital have come back and suggested this, https://www.capitalseating.co.uk/sub...ive-seat-cover

However I think the suggestion Gambit gave is much more like it.

 

I got mine from capital seating, unfortunately I can't find the invoice but I believe they are the ones for the Civic Type R FN2/FD2. The Recaro SR one didn't fit as well.

 

I've managed to achieve (if that's considered an achievement!) 9.1 km/lt (equivalent of 26 mpg) on the trip computer on a 260-mile roundtrip. Speeds for most part of the journey were around 100-130 km/h. The low fuel warning light came on at 488 km from brimming the car, not bad I think!
A couple of photos from a mid journey coffee pit stop, the Fusso99 synthetic wax is fantastic!

 

these bad boys https://www.capitalseating.co.uk/hon...ive-seat-cover

 

Yes. We offered both on the seat when I had the driver's side bolster repaired and the FN2/FD2 was the best fit.

 

I can confirm, though I bought one that had Recaro and (something honda related but I removed the stitching) and it was thick canvas type material with felt backing. Excuse the crap pics, they were from trial fitting so still a bit creased from being packaged up.




Can't for the life of me remember where I bought it.
this may be where . . .
https://www.ukcustomcovers.com/covers-and-liners/custom-seat-covers/honda/honda-integra-type-r-dc2-recaro-seat-covers-x2-grey

 

 

 

Lovely pics Rob

 

@hedgecutter how much do your spec C wheels weigh? Just interested in a comparison with the 330s wheels, lighter I am sure but by how much

 

I don't know! Fivos loves that wheel weight stuff!

 

everything to reduce unsprung weight! :P

 

https://forums.nasioc.com/forums/sho....php?t=2239019

Wheel weights