08/09 Hatches, Stand up and show yourselves!!!
#1711
Scooby Regular
iTrader: (3)
Join Date: Nov 2000
Location: Norfolk
Posts: 2,239
Likes: 0
Received 0 Likes
on
0 Posts
A few options around mate
Been following a few threads over in states (IWSTI & NASIOC). They seem to think front side pillar mounting is fine (seen a picture with the airbags deployed and it is the side curtain air bag that comes out of the very top of the pillar only). But no-one is making the pods just yet (most are homebrew ones).
I don't like all the other aftermarket options (on top of the clock pod, top of the dash pod, steering column pods, replacing the middle air vents option) and having a double din DVD unit, like you, I don't want to replace it with a single din unit and fit the single din 3 gauge units they do (DEFI etc.)
So far the best compromise I have found is the HKS CAMP 2 setup for DVD displays (not cheap though)...not essential so only a wish list for me
HKS USA HKS CAMP2 Real-Time Engine Monitoring
Been following a few threads over in states (IWSTI & NASIOC). They seem to think front side pillar mounting is fine (seen a picture with the airbags deployed and it is the side curtain air bag that comes out of the very top of the pillar only). But no-one is making the pods just yet (most are homebrew ones).
I don't like all the other aftermarket options (on top of the clock pod, top of the dash pod, steering column pods, replacing the middle air vents option) and having a double din DVD unit, like you, I don't want to replace it with a single din unit and fit the single din 3 gauge units they do (DEFI etc.)
So far the best compromise I have found is the HKS CAMP 2 setup for DVD displays (not cheap though)...not essential so only a wish list for me
HKS USA HKS CAMP2 Real-Time Engine Monitoring
Do you know if data for air intake temp, oil temp, oil pressure, boost can be taken from ecu or do you have to buy the sensors at extra cost ?
The vent gauges from Revolution would cost a min £200 + £160 for the pre drilled replacement vent plate to fit them in - so not much less than the HKS dvd display
Cheers
Stan
Last edited by StanS; 19 January 2010 at 09:27 AM. Reason: more info
#1712
Scooby Regular
Join Date: Sep 2003
Location: At the diesel pump...
Posts: 8,677
Likes: 0
Received 0 Likes
on
0 Posts
[Dons flame suit in case everyone knew this & it's just me who didn't read all the manual....]
So I was getting hacked off at the fan / heating controls / AC being either freezing cold or too hot,
spotted this on IWSTI, post #9
This is what they call *auto* climate control?! - IWSTI.com: Subaru WRX STI Forums
Tried it tonight.......at last it works properly press the AC button for two seconds till it flashes & hey presto 17degC is only marginally warmer than 16degC, rather than before
Was starting to think Subaru can't design anything right
So I was getting hacked off at the fan / heating controls / AC being either freezing cold or too hot,
spotted this on IWSTI, post #9
This is what they call *auto* climate control?! - IWSTI.com: Subaru WRX STI Forums
Tried it tonight.......at last it works properly press the AC button for two seconds till it flashes & hey presto 17degC is only marginally warmer than 16degC, rather than before
Was starting to think Subaru can't design anything right
#1713
Scooby Regular
iTrader: (2)
found an interesting website whilst searching for R205 stuff:
ƒIƒŠƒWƒiƒ‹¤•iˆê——^ƒAƒ‰ƒCƒ‚[ƒ^[ƒXƒ|[ƒcŠ”Ž®‰ïŽÐ
ƒIƒŠƒWƒiƒ‹¤•iˆê——^ƒAƒ‰ƒCƒ‚[ƒ^[ƒXƒ|[ƒcŠ”Ž®‰ïŽÐ
#1715
Hello I'm BJM over on the sidc website. Much bigger following of the hatches over here so thought I'd ask you guys:
where's the best place to get a front splitter? I'm after an oem look but refuse to pay full dealer price for it.
What bulbs should I be buying for the side lights to 'match better' with the headlights?
Thanks in advance
EDIT - is a 08 sti
where's the best place to get a front splitter? I'm after an oem look but refuse to pay full dealer price for it.
What bulbs should I be buying for the side lights to 'match better' with the headlights?
Thanks in advance
EDIT - is a 08 sti
Last edited by BJMScot; 19 January 2010 at 12:05 PM. Reason: Insert car model
#1716
Many thanks Dave ! I understood the bits that were in English, but got lost in the technospeak.
Do you know if data for air intake temp, oil temp, oil pressure, boost can be taken from ecu or do you have to buy the sensors at extra cost ?
The vent gauges from Revolution would cost a min £200 + £160 for the pre drilled replacement vent plate to fit them in - so not much less than the HKS dvd display
Cheers
Stan
Do you know if data for air intake temp, oil temp, oil pressure, boost can be taken from ecu or do you have to buy the sensors at extra cost ?
The vent gauges from Revolution would cost a min £200 + £160 for the pre drilled replacement vent plate to fit them in - so not much less than the HKS dvd display
Cheers
Stan
I worked it out as costing around $1000 in the US and costing around £720 by the time you get all the stuff you need over here (i.e. with the import tax, but without fitting costs). Haven't seen a UK supplier yet, but I haven't really looked into it.
Given the CAMP2 unit plugs into the OBDII port would be interesting to know if you can read/re-set fault codes as well for that money!
#1717
Hello I'm BJM over on the sidc website. Much bigger following of the hatches over here so thought I'd ask you guys:
where's the best place to get a front splitter? I'm after an oem look but refuse to pay full dealer price for it.
What bulbs should I be buying for the side lights to 'match better' with the headlights?
Thanks in advance
EDIT - is a 08 sti
where's the best place to get a front splitter? I'm after an oem look but refuse to pay full dealer price for it.
What bulbs should I be buying for the side lights to 'match better' with the headlights?
Thanks in advance
EDIT - is a 08 sti
Revolution Performance Motorstore
For the front splitter there are a few options around, but the OEM one looks the best IMO. Suggest you get a price from a main dealer, then ring Ian at Litchfields and see what price he can do it for you...
Litchfield
p.s. welcome to The UK Hatch Thread mate
#1718
Scooby Regular
iTrader: (3)
Join Date: Nov 2000
Location: Norfolk
Posts: 2,239
Likes: 0
Received 0 Likes
on
0 Posts
Oil Pressure,Oil Temp & Boost are all seperate sensors and you need an oil filter sandwich plate adapter etc. and then the HKS IF meter interface unit to plug them into.This then plugs into the CAMP 2 main control box.
I worked it out as costing around $1000 in the US and costing around £720 by the time you get all the stuff you need over here (i.e. with the import tax, but without fitting costs). Haven't seen a UK supplier yet, but I haven't really looked into it.
Given the CAMP2 unit plugs into the OBDII port would be interesting to know if you can read/re-set fault codes as well for that money!
I worked it out as costing around $1000 in the US and costing around £720 by the time you get all the stuff you need over here (i.e. with the import tax, but without fitting costs). Haven't seen a UK supplier yet, but I haven't really looked into it.
Given the CAMP2 unit plugs into the OBDII port would be interesting to know if you can read/re-set fault codes as well for that money!
Incidentally I hear that Ecutek are releasing software in March to tuners to allow mapping on the S and S# settings
#1719
Scooby Regular
Thread Starter
Does anyone know what the switch is near seat belt on the centre console?
#1721
Scooby Regular
Thread Starter
#1722
Scooby Regular
iTrader: (15)
Join Date: Apr 2006
Location: Kent
Posts: 2,995
Likes: 0
Received 0 Likes
on
0 Posts
Not ideal but another option for those that do not like music!
http://www.japanparts.com/images/Ima...ase=1&no=24969
http://www.japanparts.com/images/Ima...ase=1&no=24969
#1723
Scooby Regular
iTrader: (15)
Join Date: Apr 2006
Location: Kent
Posts: 2,995
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=silver demon;9167057]Looks interesting
Does anyone know what the switch is near seat belt on the centre console?
That is where my heated seat buttons are but mine are different, 2 x roller type, maybe just the drivers is heated?
Does anyone know what the switch is near seat belt on the centre console?
That is where my heated seat buttons are but mine are different, 2 x roller type, maybe just the drivers is heated?
#1724
Scooby Regular
Thread Starter
Not ideal but another option for those that do not like music!
http://www.japanparts.com/images/Ima...ase=1&no=24969
http://www.japanparts.com/images/Ima...ase=1&no=24969
#1728
Scooby Regular
Thread Starter
I/C water-spray! never understood why that was dropped on the hatch?
Its been on all other STI's for years. Now its back?
Also see the red stitching is back on the steering wheel
The seats look similar to my Recaro's which are not heated.
I like the rear under spoiler
Its been on all other STI's for years. Now its back?
Also see the red stitching is back on the steering wheel
The seats look similar to my Recaro's which are not heated.
I like the rear under spoiler
#1729
Scooby Regular
iTrader: (3)
Join Date: Nov 2000
Location: Norfolk
Posts: 2,239
Likes: 0
Received 0 Likes
on
0 Posts
Not ideal but another option for those that do not like music!
http://www.japanparts.com/images/Ima...ase=1&no=24969
http://www.japanparts.com/images/Ima...ase=1&no=24969
(nothing new there then !)
Look good though !
#1732
Scooby Regular
iTrader: (15)
Join Date: Apr 2006
Location: Kent
Posts: 2,995
Likes: 0
Received 0 Likes
on
0 Posts
Hmmm, well that was easy to find, front page as a new release, so who is going to be the first to retro fit, price does not seem to bad and includes all you need!
japanparts.com : PARTS DATABASE
japanparts.com : PARTS DATABASE
#1734
Scooby Regular
iTrader: (3)
Join Date: Nov 2000
Location: Norfolk
Posts: 2,239
Likes: 0
Received 0 Likes
on
0 Posts
Hmmm, well that was easy to find, front page as a new release, so who is going to be the first to retro fit, price does not seem to bad and includes all you need!
apanparts.com : PARTS DATABASE
apanparts.com : PARTS DATABASE
#1735
Scooby Regular
iTrader: (2)
Hmmm, well that was easy to find, front page as a new release, so who is going to be the first to retro fit, price does not seem to bad and includes all you need!
japanparts.com : PARTS DATABASE
japanparts.com : PARTS DATABASE
ye saw this this morning, bloody great price!!!
dont think i could be arsed to rip out the interior to rn the piping & relays
#1736
Scooby Regular
Join Date: Jun 2007
Location: fife scotland
Posts: 550
Likes: 0
Received 0 Likes
on
0 Posts
Hello I'm BJM over on the sidc website. Much bigger following of the hatches over here so thought I'd ask you guys:
where's the best place to get a front splitter? I'm after an oem look but refuse to pay full dealer price for it.
What bulbs should I be buying for the side lights to 'match better' with the headlights?
Thanks in advance
EDIT - is a 08 sti
where's the best place to get a front splitter? I'm after an oem look but refuse to pay full dealer price for it.
What bulbs should I be buying for the side lights to 'match better' with the headlights?
Thanks in advance
EDIT - is a 08 sti
geo
gp motorsport
#1737
Scooby Regular
iTrader: (2)
I/C water-spray! never understood why that was dropped on the hatch?
Its been on all other STI's for years. Now its back?
Also see the red stitching is back on the steering wheel
The seats look similar to my Recaro's which are not heated.
I like the rear under spoiler
Its been on all other STI's for years. Now its back?
Also see the red stitching is back on the steering wheel
The seats look similar to my Recaro's which are not heated.
I like the rear under spoiler
I couldnt ever tell if it made a difference when i used it on my 2 hawkeye STI's
they reckon that the massive intake and i/c on the sti hatch didnt require the i/c spray (so why fit it on the spec c & R205?