08/09 Hatches, Stand up and show yourselves!!!
17 August 2016, 07:22 PM
Any more joy looking into wheel options on yours Guesty ?
I'm not in any position to buy any at the min but just curious all the same !
I'm not in any position to buy any at the min but just curious all the same !
17 August 2016, 09:39 PM
Quick question about wheels. If my tyres are 245 (9.5inch) , does that mean i have 18x9.5 wheels? I have seen a set of wheels that are 18x8.5 worry they'd look more lost than what i have.
Would i need to get the offset details off him ? I have never understood all this lol.
What's the Hatch stud pattern? 5x114 something?
Would i need to get the offset details off him ? I have never understood all this lol.
What's the Hatch stud pattern? 5x114 something?
17 August 2016, 10:09 PM
Scooby Regular
Join Date: May 2016
Location: Leigh
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
5x114.3 i beleave it all depends on the offset as ur wheels now might sit further in to car rather than further out mate what wheels u got now and what you changeing to
17 August 2016, 10:19 PM
Quick question about wheels. If my tyres are 245 (9.5inch) , does that mean i have 18x9.5 wheels? I have seen a set of wheels that are 18x8.5 worry they'd look more lost than what i have.
Would i need to get the offset details off him ? I have never understood all this lol.
What's the Hatch stud pattern? 5x114 something?
Would i need to get the offset details off him ? I have never understood all this lol.
What's the Hatch stud pattern? 5x114 something?
I ran a 18x9 et35 and that was right on the arch line.
so if you ran an 8.5 wide rim you'd need at least an et30 to make it look right
18 August 2016, 07:18 AM
Turns out his wheels are 5x100 anyway.
I have the 330s wheels, dealer fitted a new set when i bought the car a few months ago. Ideally I'd like to keep them on the car (want to keep origional wheels and don't need a set of wheels sitting in the garage doing nothing) but wish the filled the arches a bit more. Spacers would be the ideal solution but only if they were a simple bolt on job , not getting extended wheel bolts etc.
I have the 330s wheels, dealer fitted a new set when i bought the car a few months ago. Ideally I'd like to keep them on the car (want to keep origional wheels and don't need a set of wheels sitting in the garage doing nothing) but wish the filled the arches a bit more. Spacers would be the ideal solution but only if they were a simple bolt on job , not getting extended wheel bolts etc.
18 August 2016, 09:59 AM
18 August 2016, 12:31 PM
Scooby Regular
Mine are 8.5 aswell
18 August 2016, 05:46 PM
Scooby Regular
iTrader: (1)
Join Date: Jul 2015
Location: Argyll
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Turns out his wheels are 5x100 anyway.
I have the 330s wheels, dealer fitted a new set when i bought the car a few months ago. Ideally I'd like to keep them on the car (want to keep origional wheels and don't need a set of wheels sitting in the garage doing nothing) but wish the filled the arches a bit more. Spacers would be the ideal solution but only if they were a simple bolt on job , not getting extended wheel bolts etc.
I have the 330s wheels, dealer fitted a new set when i bought the car a few months ago. Ideally I'd like to keep them on the car (want to keep origional wheels and don't need a set of wheels sitting in the garage doing nothing) but wish the filled the arches a bit more. Spacers would be the ideal solution but only if they were a simple bolt on job , not getting extended wheel bolts etc.
I've got a full set of h&r spacers sitting in the cupboard if your interested. Think they are 15mm but would need to double check as I never took them out the box after ordering them, change of plan on wheel choice
Pm if interested
Cheers
Phil
Last edited by Phil9289; 18 August 2016 at 05:47 PM.
18 August 2016, 06:47 PM
Thanks but i can't fit spacers , my wheels have no recess on the back to hide the origional studs. Dont fancy cutting studs to be honest.
18 August 2016, 09:10 PM
Scooby Regular
Join Date: Mar 2003
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
18 August 2016, 10:01 PM
19 August 2016, 06:33 PM
Scooby Regular
Join Date: Mar 2003
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
Last time I looked on the Subaru Accessories website which doesn't list them when I've just looked they were £395 each
Just found these,
http://subaru.shukersparts.co.uk/18-...8111fg051.html
Last edited by kev m; 19 August 2016 at 06:37 PM.
19 August 2016, 07:49 PM
Last time I looked on the Subaru Accessories website which doesn't list them when I've just looked they were £395 each
Just found these,
http://subaru.shukersparts.co.uk/18-...8111fg051.html
Just found these,
http://subaru.shukersparts.co.uk/18-...8111fg051.html
I'd like to keep a hold of them but on the other hand don't see the point in buying a different wheel and have them sitting in the garage doing nowt.
If i ever need new discs or something I'd get extended studs fitted at the time which will allow me to fit spacers.
A future project it'll have to be.
19 August 2016, 08:46 PM
Scooby Regular
Last time I looked on the Subaru Accessories website which doesn't list them when I've just looked they were £395 each
Just found these,
http://subaru.shukersparts.co.uk/18-...8111fg051.html
Just found these,
http://subaru.shukersparts.co.uk/18-...8111fg051.html
But they are listed here...........
http://imdomino.imgroup.co.uk/IMGGB/...3?Opendocument
20 August 2016, 10:55 AM
Kev, far to "old hat" to be on the main website
But they are listed here...........
http://imdomino.imgroup.co.uk/IMGGB/...3?Opendocument
But they are listed here...........
http://imdomino.imgroup.co.uk/IMGGB/...3?Opendocument
Crazy price for a not overly attractive wheel IMHO. I expect quite heavy also.
20 August 2016, 01:33 PM
20 August 2016, 06:01 PM
Scooby Senior
Yes they will.
😀
But 330s alloys wouldn't be 2014. As the hatch finished it's run on 10/11plates
So the model is my08-10
My11 had the bumper change.
Have you pix?
BBS alloys were on the euro import cars.... I also think they were an optional extra. I'd have to look in the brochure to check.
😀
But 330s alloys wouldn't be 2014. As the hatch finished it's run on 10/11plates
So the model is my08-10
My11 had the bumper change.
Have you pix?
BBS alloys were on the euro import cars.... I also think they were an optional extra. I'd have to look in the brochure to check.
21 August 2016, 10:49 AM
No plans this year I'm going to drive it until end sept first week into October and then it's going into hibernation for winter. Think about a rebuild then and go from there
21 August 2016, 05:10 PM
Scooby Regular
