maybe 3 on top and 3 underneath ?

or just drive faster to cool them down ha ha ha

 

well,ive just found out the fans im using are 47 cfm each so thats 141 for all of them.

just found these

Scythe Kaze Jyuni 1900RPM Slip Stream 120mm Fan

cheap enough and kick out 110 cfm each, so thats a good 330 total and if i fit one underneath as well as the 3 on top that will be 440 cfm so pretty good.

fingers crossed

 

Supercharge the damn thing with them !

LOL

dunx

 

Look just fit the deltas and have done with it, don't believe all cfm figures btw a lot of them bs figures.

The top scythe is about 133cfm make sure it's the 3000rpm model of course, personally me id go right for the deltas, you'll know 100% sure if it's doable then, be a 99w draw though.
http://www.madshrimps.be/?action=getarticle&articID=892

 

id love to bud but the £££ dont help, to do it with the deltas im looking at near £100

with the other its just £30

if they go pop with the water etc after i silicone the boards thats is etc, if they did go pop,£30 aint bad to lose, near £100 id be a bit more annoyed.

also,gettin them from the usa adds another problem with the tax etc

otherwise id have them for sure !!!

 

also,these arent in that test are they ?

Scythe Kaze Jyuni 1900RPM Slip Stream 120mm Fan

 

Nope you want the scythe ultra kaze 3000rpm model, i can understand about the price, but it's the price you usually pay for performance.

There is this delta that is 190cfm and available over here.

http://www.scan.co.uk/Product.aspx?W...source=froogle

 

Just out of interest, why are you going to all this trouble to help your cooling, yet still using the worst tmic subaru made?
Do the charge temps really make that much difference? As using full power from a standstill you'll get wheel spin, wasting that power, by the time you get full traction, the i/c will have cooled down more than those fans will achieve. At this point, you'll be loosing ram air cooling as you've reduced the surface area by 25%.
Just my thoughts....

 

cheers for the link bud,might go with those, get 3 of them, use 2 on top of the I/C and one underneath this time ??

 

Id stick with either 3 on top or 3 under.

 

cheers.

just remembered these,wonder if they would be better than the p.c ones,being waterprrof n all etc ??

7'' SLIM LINE radiator / Intercooler Fan MR2 Universal on eBay, also Engine Tuning Parts, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 19-Apr-09 14:37:38 BST)

 

well,the offical SPAL 7.5" fan kicks out 740 cfm,

http://www.larkspeed.com/index.pl?p=134190BS&a=i

so thats nice, but still pricey,im reckoning the copy one on ebay will kick out half that so say 350 cfm ??

awaiting the guys reply but for £20 350 cfm is ample really

just gotta see how to mount 7.5£ around the intercooler,if it can go on top still and not hit the bonnet

hmmm

 

And apparantly, its quite a regular mod done from searching this forum,other forums so im not going mad,one guy went nuts and installed like 7 fans under his bonnet now that looked mad

cheers

 

Why not buy a later TMIC for peanuts (I sold one last year for £20) and then ram it full of fans?

 

Or, just buy a later tmic, and sod the fans!

 

Or just go FMIC and stop bloody peeing about!

 

would love to but the lag you get and also the new ecu and the remap id need just isnt in my wallet !!