When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Are these posted in the price above ??
and what colours can you do ??
plus do i keep the old pins etc or do you get new ones ??
cheers craig..
Hi
Yes they are the Subaru 4 pot calipers , they are supplied on an exchange basis for £175 a pair, as long as your casting aren't damaged , and the threads are all in tact.
You can have them any colour you want , yes you can keep your pins and clips .
Cheers Ian
Last edited by Godspeed Brakes; 20 July 2008 at 08:28 PM.
Received the 294mm discs this morning, and really pleased with them, they look like a top quality bit of kit, looking forward to getting them on!
Cheers!
Tom
Ian, re the 326mm 2 piece set for STi brembos. When the discs are worn, what price are they roughly on their own. Whats the benefits of these over the single piece?
Ian, re the 326mm 2 piece set for STi brembos. When the discs are worn, what price are they roughly on their own. Whats the benefits of these over the single piece?
They are £250 a pair including a set of nuts and bolts.
Hi ian im going to order the front disc's and pads but im also after rear pads and rear hand brake shoes do you supply these for a 2004 wrx?
Im going to try the Mintex Extreme pads are these anygood or has anyone used these before?
Hi
The rear pads are also £65 a set , and handbrake shoes are £30 a set.
The Mintex pads are a good pad , if you do a lot of town use , and give it a bit of stick now and again , not really suitable for track days , not everyone is a road racer all of the time
They are a good pad.
My discs and pads need changing on my my99 wagon, do I go with uprated pads and disks or upgrade the caliper to a 304mm setup, as if I can avoid it I want to keep my alloys as I have new tyres all around. What can you recommend.
My discs and pads need changing on my my99 wagon, do I go with uprated pads and disks or upgrade the caliper to a 304mm setup, as if I can avoid it I want to keep my alloys as I have new tyres all around. What can you recommend.
It depends on how much you want to spend , the 304mm kits I make with either AP or Brembo calipers will fit under the standard 16" wheels as I make my bells with more offset than other kits to take the discs and calipers further in from the spokes.
Cheers Ian
How much of an improvement would the front 294mm discs with DS2500's for classic 4 pots be over the standard 4pot setup?
Sold my RA lastweek and left the Ksport 8pots on the car, the new RA has standard discs/pads and the braking is crap.
If you only have standard pads and discs , then it will be a big improvement , you should also check that the caliper pistons are all free and not sticking at all