Hawkeyes, Stand up and show yourselves!
13 April 2013, 07:42 PM
#721
Scooby Regular
I've been at 370 for a while now and done about 5 trackdays. I would say I put it through its paces. I've been told that the hawk boxes were improved and stronger than the other newages
The 5 speed works well for me on track. Only downside is on the long straights. I know a few guys with 6speed that get a higher top speed in time due to having that 6th gear.
The 5 speed works well for me on track. Only downside is on the long straights. I know a few guys with 6speed that get a higher top speed in time due to having that 6th gear.
yeah my evnetual plan is to go hawkeye 6 speed, dont want shorter ratiopns with this power, goes through the gears fast enough as it is lol
agree mate
16 April 2013, 09:14 PM
#723
Scooby Regular
iTrader: (1)
Join Date: Jan 2013
Location: Manchester
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Heres mine:
Rota Formula Mesh 18" Alloys, Godspeed 335mm Front brake ki
Rota Formula Mesh 18" Alloys, Godspeed 335mm Front brake kit, 32mm thick discs:
VF43 Turbo, Full Milltek Exhaust, Wallbro Fuel Pump, Remapped to 329Bhp
Rota Formula Mesh 18" Alloys, Godspeed 335mm Front brake ki
Rota Formula Mesh 18" Alloys, Godspeed 335mm Front brake kit, 32mm thick discs:
VF43 Turbo, Full Milltek Exhaust, Wallbro Fuel Pump, Remapped to 329Bhp
28 April 2013, 08:39 PM
#726
Scooby Newbie
iTrader: (1)
Join Date: Dec 2009
Location: ireland
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
my2006 sti , 350bhp/400torques by Bob Rawle on racerom , Miltek , prodrive , apexi , tein , kyb , perrin and zunsport bits and pieces thrown in for good measure 
29 May 2013, 10:29 AM
#727
Scooby Regular
iTrader: (16)
Join Date: Mar 2005
Location: Ljubljana,Slovenia
Posts: 1,574
Likes: 0
Received 0 Likes
on
0 Posts
Hawks have drop to page 5 so i had to do something......buy a hawk
Euro spec,stage 1 with few nice parts.
Euro spec,stage 1 with few nice parts.
Last edited by beliblisk; 30 May 2013 at 11:15 AM.
18 June 2013, 06:54 PM
#728
Here is a last picture of my car at Snetterton doing Time Attack, this is the last time it will look like this, the car has been at ABW having further body modifications so I can make it even wider!!
Below was with wheels that were 18x9.5" ET35 (tyres 265/35/18)
The new set up will be 18x10.5" ET17 (tyres 292/30/18) running with AS Performance 10mm spaces behind each wheel!!!
Below was with wheels that were 18x9.5" ET35 (tyres 265/35/18)
The new set up will be 18x10.5" ET17 (tyres 292/30/18) running with AS Performance 10mm spaces behind each wheel!!!
23 June 2013, 06:46 PM
#729
Scooby Newbie
Join Date: Apr 2013
Location: West Midlands
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
PINNED 2.5 BLOCK
ACL RACE BEARINGS
COSWORTH PISTONS
COSWORTH RODS
COSWORTH BAFFLED SUMP
COSWORTH OIL PUMP
ARP 14MM HEAD STUDS
MOCAL TOP MOUNTED OIL COOLER
APS INTERCOOLER SYSTEM
GT SPEC HEADERS
3 BOLT UPIPE
GARRETT GT3582r
TIAL EXTERNAL WASTEGATE
RCM DOWNPIPE 76MM
RCM 76MM COMPETITION EXHAUST
PERRIN PARRELLEL FUEL RAILS
PERRIN FUEL PRESSURE REGULATOR
ID 1000CC INJECTORS
BOSCH 044 PUMP WITH SPEC C ANTI SURGE UNIT
TURBOSMART ADJUSTABLE BOOST SOLENOID
SAMCO TURBO INTAKE
VIPER FRONT WING RAM AIR INTAKE
RCM INTAKE WITH BIG K&N FILTER 12"INCH
COSWORTH TIMING BELT
BC RM COILOVERS
HKS SSQV VALVE
MOTEC M800 ECU
HYPERFLOW BREATHER SETUP
HYPERFLOW BATTERY CLAMP
HYPERFLOW RADIATOR OVERFLOW
EXCEDY HYPER TWIN PLATE CLUTCH
EXCEDY LIGHTWEIGHT FLYWHEEL
SIEBON CARBON BONNET
SPEC C MATT BLACK INTERIOR FASCIA TRIMS
PRO SPORT 60mm OIL PRESSURE/TEMP/BOOST GAUGES
XXR527 WHEELS
V-LIMITED FRONT SPLITTER & SIDE SKIRTS
ABW REAR DIFFUSER
552hp-531fl/lb
Last edited by spectrum; 23 June 2013 at 06:57 PM. Reason: Cuz im a fool
16 July 2013, 07:54 AM
#734
Scooby Newbie
Join Date: Apr 2013
Location: West Midlands
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
30 July 2013, 09:48 PM
#743
Scooby Regular
30 July 2013, 11:54 PM
#745
Scooby Regular
Join Date: Jul 2013
Location: N.Ireland
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
may as well add my WRX to the pile.. got it about a week ago. 63k with full history, all standard bar me swapping the wheels over to the ones pictured and changing full beam, sidelight and rear numberplate bulbs to items a bit nicer than the boggo standard bulbs. some ideas in the works but no real plans as of yet bar wanting some more poke from it and potentially mapping it myself. will be picking up a panel filter for it soon, either cosworth or HKS.
Last edited by DmcL; 31 July 2013 at 12:00 AM.
31 July 2013, 02:59 PM
#746
Scooby Regular
Join Date: Feb 2008
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
