NEW HID GroupBuy - 12% Cheaper
Count me in then Bob paypal payment sent 
1. BOB'5 - H4 6k Bi - Deposit Paid
2. WillGill - H4 6k Bi - Deposit Paid
3. WUZ - H4 6k Bi -
4. Frayz - H1 6K Single Deposit Paid
5.AsianGunner H4 8k bi - deposit paid
6. Bully3176 - H1 6K Single - Deposit Paid
1. BOB'5 - H4 6k Bi - Deposit Paid
2. WillGill - H4 6k Bi - Deposit Paid
3. WUZ - H4 6k Bi -
4. Frayz - H1 6K Single Deposit Paid
5.AsianGunner H4 8k bi - deposit paid
6. Bully3176 - H1 6K Single - Deposit Paid
Thread Starter
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Originally Posted by R19KET
No, its not those ones. Its the exact same ones as the other GB.
GB closes at Noon tomorrow. All deposits to be paid before then.
I'll back out of this one after a few conversations with "certain people" and the fact that I'd rather pay the extra 16 pounds for the extra 2 years warranty!
Good luck Guys!
Russell
Good luck Guys!
Russell
Last edited by WUZ; Oct 30, 2006 at 07:29 AM.
Thread Starter
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Russel: The 'extra' 2 years warranty doesn't cover the bulbs, which make up the biggest part of the costs.
for example:
Bi kit = £113+post
Bulbs = £75 (at GB rates)
Amount covered by extra warranty = £38
Then take out costs of returning the kit (assume the same rate of postage) = £22
In reality the "Extra" warranty covers only £16 of the kit, for which you are charged an extra £16 for.
Personally wouldn't pay £1000 on warranty cover on a £1000 telly
No worries though. Its all the same kit, so no doubt you'll be happy whichever way you go.
for example:
Bi kit = £113+post
Bulbs = £75 (at GB rates)
Amount covered by extra warranty = £38
Then take out costs of returning the kit (assume the same rate of postage) = £22
In reality the "Extra" warranty covers only £16 of the kit, for which you are charged an extra £16 for.
Personally wouldn't pay £1000 on warranty cover on a £1000 telly
No worries though. Its all the same kit, so no doubt you'll be happy whichever way you go.
Thread Starter
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Should anybody want any spare bulbs at reduced cost, please let me know asap.
Worth buying as spares so you dont have to wait for replacements.
Need to know by tomorrow morning.
Cheers,
Bob
Worth buying as spares so you dont have to wait for replacements.
Need to know by tomorrow morning.
Cheers,
Bob
Last edited by Aztec Performance Ltd; Nov 16, 2006 at 09:45 PM.
Scooby Regular
iTrader: (18)
Joined: May 2006
Posts: 3,420
Likes: 2
From: Middx / Herts / Bucks / Essex
Originally Posted by saxperience
Anymore of these kits available?
I've just missed the groupbuy and very interested on a HID H4 kit.
If anyone backsout let me know
I will be happy to take you place in the groupbuy!
I've just missed the groupbuy and very interested on a HID H4 kit.
If anyone backsout let me know
I will be happy to take you place in the groupbuy!
errr... there's always the original GB of HID's thats running constantly - no chance of missing that one
Thread Starter
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Good News! Kits have landed 
Unless anybody is in a particular rush, I will get these sent out on Fri/Sat.
AsianGunner: Haven't recieved payment from you yet. If I dont have cleared payment by Friday I will assume you have backed out and sell the kit on (you will lose your deposit).
Frayz: Received the 1st cheque, just awaiting the 2nd.
Bully: Payment received
WillGill: Payment received
Cheers Gents.
Unless anybody is in a particular rush, I will get these sent out on Fri/Sat.
AsianGunner: Haven't recieved payment from you yet. If I dont have cleared payment by Friday I will assume you have backed out and sell the kit on (you will lose your deposit).
Frayz: Received the 1st cheque, just awaiting the 2nd.
Bully: Payment received
WillGill: Payment received
Cheers Gents.
Last edited by Aztec Performance Ltd; Nov 7, 2006 at 07:01 PM.
Originally Posted by saxperience
Anymore of these kits available?
I've just missed the groupbuy and very interested on a HID H4 kit.
If anyone backsout let me know
I will be happy to take you place in the groupbuy!
I've just missed the groupbuy and very interested on a HID H4 kit.
If anyone backsout let me know
I will be happy to take you place in the groupbuy!
Scooby Regular
Joined: Apr 2005
Posts: 182
Likes: 0
From: County Durham
Originally Posted by AsianGunner
hi guys
the H4 8k BI kit that i ordered is the wrong one for my prodrive lights.
do you's know anyone that would take them off my hands for the GB price of 119 quid?
the H4 8k BI kit that i ordered is the wrong one for my prodrive lights.
do you's know anyone that would take them off my hands for the GB price of 119 quid?
I nearly ordered a H4 fitment as i checked some online fitment guides which said an 02 WRX STI Prodrive used them. I had a feeling they didn't because the main beam stays on when putting full beam on so i went and checked.
Main beam was H1 and i think full beam was HB3 or something like that. Hope that helps.
Originally Posted by JPS3290
Hey,
I nearly ordered a H4 fitment as i checked some online fitment guides which said an 02 WRX STI Prodrive used them. I had a feeling they didn't because the main beam stays on when putting full beam on so i went and checked.
Main beam was H1 and i think full beam was HB3 or something like that. Hope that helps.
I nearly ordered a H4 fitment as i checked some online fitment guides which said an 02 WRX STI Prodrive used them. I had a feeling they didn't because the main beam stays on when putting full beam on so i went and checked.
Main beam was H1 and i think full beam was HB3 or something like that. Hope that helps.
just to check, they are the fitment for these ones :
----------------------------------------------------------------------
----------------------------------------------------------------------
Scooby Regular
Joined: Apr 2005
Posts: 182
Likes: 0
From: County Durham
No they are different to mine. Here's mine. Ignore the upside down badge, paint shop put it on the wrong way after having stone chips repaired, fixed now though
Look similiar but without the tinted cover. Mine have 4 holders, Main light, Full beam light, side light and indicator.
Easiest way is to take the bulb out as mine had H1 wrote on it
Yours
Look similiar but without the tinted cover. Mine have 4 holders, Main light, Full beam light, side light and indicator.
Easiest way is to take the bulb out as mine had H1 wrote on it
Yours
Thread Starter
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Frayz: Have left yours with Zak.
Bully: Dispatched today.
WillGill: Dispatched today.
Asiangunner/sax: Will sort something with you guys when I get back.
Am away till Wednesday.
Bully: Dispatched today.
WillGill: Dispatched today.
Asiangunner/sax: Will sort something with you guys when I get back.
Am away till Wednesday.
Thread Starter
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Easy enough to fit. Allow 2-3hours for first time fit.
Single bulbs are main beam or dipped only. You would need 2 kits if you have this bulb type on your car and wish to have HID for main beam and dipped.
Bi bulbs are combined main beam and dipped.
The ones that you will need will be decided by what you have on your car now. For example....a classic with a H4 combined bulb would need a Bi kit.
I'll get some pics up of my install later.
Single bulbs are main beam or dipped only. You would need 2 kits if you have this bulb type on your car and wish to have HID for main beam and dipped.
Bi bulbs are combined main beam and dipped.
The ones that you will need will be decided by what you have on your car now. For example....a classic with a H4 combined bulb would need a Bi kit.
I'll get some pics up of my install later.
Thread Starter
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
BIG difference.
I will check the beam pattern against an OE HID system and take some pics.
Lights up the road well and seems under control. The light starts a bit further down the road than an OE HID system, although that is on another car.
I will check the beam pattern against an OE HID system and take some pics.
Lights up the road well and seems under control. The light starts a bit further down the road than an OE HID system, although that is on another car.
Joined: Sep 2005
Posts: 19,945
Likes: 2
From: "Engineering Perfection in Essex"
BOB5,
Can you PM me with your addy and how much i owe you for the replacement bulbs?... I havent forgotten.. cheers mate :d
Anyone got a fitting guide for these yet?
Can you PM me with your addy and how much i owe you for the replacement bulbs?... I havent forgotten.. cheers mate :d
Anyone got a fitting guide for these yet?
