FMIC Kit
Scooby Regular
iTrader: (8)
Joined: Jul 2005
Posts: 998
Likes: 0
From: Now with added 2.1 jun/cosworth power
Recieved mine today 
Many thanks bren and louise, very happy with the kit all looks good.
Can you get hold of many other performance gc8 bits bren as im currently rebuilding my car ??.
Cheers
Worbs
Many thanks bren and louise, very happy with the kit all looks good.
Can you get hold of many other performance gc8 bits bren as im currently rebuilding my car ??.
Cheers
Worbs
Scooby Regular
Joined: Aug 2006
Posts: 163
Likes: 0
cheers ralfandcarol thats what i done in the end cut out the middle section of front member!! if you mount the intercooler at the top from the cross member the cooler sits too low for the pipework!
Just got to finish triming the bumper and its all done appart from my BOV i got to get welded into the pipe work!!
Just got to finish triming the bumper and its all done appart from my BOV i got to get welded into the pipe work!!
Originally Posted by DaOne
anyone got pics of there fmic fitting?
But only once engine is run in........200miles to go.
Will post pics soon ..
I,m also gonna get hardpipes powdercoated blue...i think..and i am sure the intercooler was fitted up onto cross beam on my mates my99..using an autobahn intercooler..ie beam was trimmed not cut out completely.
Maybe he had a different kit???
Have also sourced some better fixings for pipe connections...Mikalor Supra Hose Clamps
STAGONSET - Online Stainless Steel Fasteners
Best on price i could find...
STAGONSET - Online Stainless Steel Fasteners
Best on price i could find...
Originally Posted by rooferman
Have also sourced some better fixings for pipe connections...Mikalor Supra Hose Clamps
STAGONSET - Online Stainless Steel Fasteners
Best on price i could find...
STAGONSET - Online Stainless Steel Fasteners
Best on price i could find...
do you know how many, what sizes we need for the fmic kit?
Im looking to pass the facelift intercooler part of the group buy back over to Matt33, he is getting hold of his suppliers now
We will be looking an an Apex coilover group buy in the near future. We have sold hundreds of our kits and they go down very well. We sent a set out to a Scooby owner (RHH on here) for evaluation and long term testing many moons ago and he reported back recently saying alls still good and that hes more than happy with them.
He said he was happy to give his views and opinions on them. He is completely unbiased and was chosen because I needed someone with a high level of track and suspension experience in order to get usable feedback. He was recommended to me my John Felsted, I assume many of you know John.
We will be looking an an Apex coilover group buy in the near future. We have sold hundreds of our kits and they go down very well. We sent a set out to a Scooby owner (RHH on here) for evaluation and long term testing many moons ago and he reported back recently saying alls still good and that hes more than happy with them.
He said he was happy to give his views and opinions on them. He is completely unbiased and was chosen because I needed someone with a high level of track and suspension experience in order to get usable feedback. He was recommended to me my John Felsted, I assume many of you know John.
Scooby Regular
Joined: Apr 2006
Posts: 256
Likes: 0
From: Kempston Bedford
fitted my fmic no probs to my Sti Type Ra kept everything in place even the air ducts to the brakes exellent quality! i got some black ally mesh to protect intercooler and it looks great i will post some photos tomorrow (how to get photos onto thread 
)
)
Originally Posted by morto15
fitted my fmic no probs to my Sti Type Ra kept everything in place even the air ducts to the brakes exellent quality! i got some black ally mesh to protect intercooler and it looks great i will post some photos tomorrow (how to get photos onto thread )
)
Scooby Regular
Joined: Dec 2004
Posts: 985
Likes: 3
From: Gloucestershire
How are you all fitting your dump valves with this kit? I'm looking at putting mine on and I have 19mm outer diameter on the DV and 37mm outer diameter on the intercooler kit. What do you use to connect these? I cant fine a reducer that caters for this.
Scooby Regular
Joined: Sep 2003
Posts: 682
Likes: 0
From: boostville
Borat, either buy another dump valve to suit, or if you know of a local machine shop, then get them to turn you a little alloy reducer down, then you can buy 2 bits of staright hose to fit.
I think Forge valves are bigger in diameter.
I think Forge valves are bigger in diameter.
Scooby Regular
Joined: Nov 2006
Posts: 68
Likes: 0
i got two fmics in this group buy one for me and one for my mate
he's now gone to the other side n bought a skyline so his scooby has gone so his fmic is up for sale
brand new still in the box
pm me if anyone is interested same price as the group buy price
195 quid but will need to add on postage but not very much
cheers
he's now gone to the other side n bought a skyline so his scooby has gone so his fmic is up for sale
brand new still in the box
pm me if anyone is interested same price as the group buy price
195 quid but will need to add on postage but not very much
cheers
Scooby Regular
Joined: Nov 2003
Posts: 268
Likes: 0
From: dont post much
Originally Posted by haxbyscoobs
i got two fmics in this group buy one for me and one for my mate
he's now gone to the other side n bought a skyline so his scooby has gone so his fmic is up for sale
brand new still in the box
pm me if anyone is interested same price as the group buy price
195 quid but will need to add on postage but not very much
cheers
he's now gone to the other side n bought a skyline so his scooby has gone so his fmic is up for sale
brand new still in the box
pm me if anyone is interested same price as the group buy price
195 quid but will need to add on postage but not very much
cheers
