finalzero

Looking good mate, I have a Zero/Sports intercooler splitter however I have found a flaw with these, when you use your IC spray the vanes stop the water from spraying across the IC so it all collects at the front or leaks down into the engine!

Going to be refitting the standard one and probably make up my own IC splitter that allows the spray to go across the IC as I don't want to go down the FMIC route yet (just don't have the power output).

Your car is looking good mate and great to see you tackled the work yourself even if it made you cry

marcelgtt

First off all thanks

I painted it myself with a spraycan that they made for me @ a local paintshop,so new paint on a 9 year old car.
The color sometimes lookes oke and other times its darker.

I dont had that problem i dont have IC spray and my splitter was a lot cheeper then one from a shop

marcelgtt

To long ago after the last update

The STI R/RA MY'93 exhaust manifold with SLM exhaust gas temp meter.



Alloy STI wishbones mounted along with STI topmounts



Gril with hardware store mesh in it and painted complete in car color.


Also fitted the STI shortshift with Kartboy shifter bushes



Also fitted braided brake hoses on the back.
Wanted to do the same @ the front but we could not find out how to mount it without bending the lines to much (we where afraid off almost breaking them )

Mayby someone here has pic's off these hoses when mounted or nows how howe to


And my Vibrant Round Metal Core Catalytic Converter: 2.50" has arrived from the U.S..


The latest pic's taken @ the supermeet in de Meern.

marcelgtt

I've been busy looking for a white MY'03 and had some plans for that one already but because of the hard times of selling your own car and feeling bad to get rid of the car whe now have i'm going on to update this one


Before the yearly MOT overhere i had a metal sportcat installed in the downpipe and put heatwrap around it and sprayed it with exhaust paint.


I only think it cost me more hps than i thought it would be mayby its time for a remap

From the UK came a front Brembo set but the problem was when they arrived that the disks and pads where worn so after some search work i came across Godspeed and ordered new grooved disks and pads and also new braided hoses



Also bought a set home made whiteline brackets with new bushes


And also aset of powerflex bushes for the front stabi.


That's it for now and i'm looking out for a set of wheels that will fit the brembo's

marcelgtt

After doing a little refurbishing on the Brembo calipers it was time to mount them on the car last week.

marcelgtt

It's bin a long time since i updated on here.

After alot of strange problems with our Classic whe had the chance to go to a newer car with a reasonable price for the classic wich i stripped off most parts.

Whe are now the owners of a MY'06 Hawkeye.

Update list on first page and here are some pics.

1st test drive


Exchance of the old and the new one



How it sits @ he moment

Abx

iTrader: (15)

Like that a lot.

Steve777

iTrader: (8)

Great thread

salsa-king

nice clean car, I'm liking the spoiler-less style, wheels in black so much better too, as they 17"s?

Dirk Diggler 75

Good Thread....
Nice Motors......

marcelgtt

Thank you very much guys

Plan is that it stays without a spoiler for now mayby in the future i can find another bootlid with a spoiler the mayby i go the spoiler route we will see how it goes.

And these black STI wheels are the winterset in 17'' wich i need for the Brembo's who are waiting to be put on the car and for the summer i have Rota tarmac bronze lying around.

marcelgtt

Long time ago since last update so here's a new list

Zero port intake


Momo steering wheel with gold sparco extensioner
Duracon spoon style gearknob
Home made shifter and handbrake cover


New stickers on windows and mudflaps


Finally time to mount the Apex coilover set with extensioners along with Whiteline anti lift kit and bumpsteer kit.






And the summer Rota set back with new tyres and black nuts






Next 2 weeks are full but i'll hope to put the Brembo set back on after those weeks and some other things like STI RA/R MY'93 exhaust manifold,STI 8 tmic,kartboy shifter bushes,apexi induction kit and ....

marcelgtt

That has been a long time but we still have the hawkeye with us.

Now and then i'm looking on Scoobynet but never took the time to update my profile

Meanwile i offcorse changed and added some things, i updated the list in the first post.

I had to change a new coilover set because the Apex set had a broken spring and was getting old, the new one is Tein set.

There is a replica wing on the trunk.

There is new Aliexpress headunit with my old Rockford fosgate amplifier and subwoofer installed.

We have a new set of gauges wich are a defi style set.

And the car is mapped with ecutec.

Also the bottem of the car is treated against rust by a company but i'm not so happy with the result, and i tackled the wheel arches myself.

I'll ad some photo's, i think you guys like that more then my writing

seriong_hoo

Beautiful cars thanks for sharing.

marcelgtt

Thanks

Little update again, mounted a brake cylinder brace and a pulley cover.





And i have been busy putting a Defi advance ZD set into the car.
As i already have Defi gauges connecting it was easy i only need some help with connecting some extra other sensors.
Bought a extra gear lever surrounding and played with it a little bit, i think it turned out okay by my standards





Is it possible for me to change the topic title, i can not find how to to do it?