Notices
ScoobyNet General General Subaru Discussion

sti7 ppp - wrc tech "wrc 350" upgrade

Thread Tools
 
Search this Thread
 
Old 18 January 2006 | 12:16 PM
  #31  
GazTheHat's Avatar
GazTheHat
Scooby Regular
 
Joined: Aug 2005
Posts: 7,638
Likes: 0
From: 392/361 MY04 STi
Default

Hmmm, has anyone done a comparison between their 330 Kit:
http://www.wrc-tech.co.uk/subaru-04sti-WRC330.htm

And the TSL333 ?? That would be interesting reading. Especially as the WRC Tech conversion is over £300 cheaper.
Old 18 January 2006 | 12:55 PM
  #32  
Andy Porter's Avatar
Andy Porter
Scooby Regular
 
Joined: Nov 1999
Posts: 2,490
Likes: 0
Default

Originally Posted by peter budgen
yes it was standard before at
exept a h&s back box
265bhp and 250lb ft
red lines on graph show before

budgie
**** me sideways I had no idea you could get that sort of power from a 'uk' turbo, I only thought the twin scrolls could reach that-very impressive. Now wheres the trader for standard UK 9's If only
Old 18 January 2006 | 05:38 PM
  #33  
Budgie's Avatar
Budgie
Scooby Regular
iTrader: (4)
 
Joined: Jul 2001
Posts: 10,429
Likes: 0
From: MSOC..........middlesex subaru owners club
Default

Originally Posted by sherlock
Hi budgie, where did you get this from?

http://img.photobucket.com/albums/v5...b/DSC00864.jpg

Thanks

Sherlock
custom made m8

budgie
Old 18 January 2006 | 05:43 PM
  #34  
Budgie's Avatar
Budgie
Scooby Regular
iTrader: (4)
 
Joined: Jul 2001
Posts: 10,429
Likes: 0
From: MSOC..........middlesex subaru owners club
Default

Originally Posted by mickyjeff
peter, did you get the 350 or 360 conversion done, sorry just realised you have the TMIC so its the 350 was it value for money ? i am itching to get my STI9PPP done did you get any extras
cheers mick
hi mick
if you look on wrc's web site at the 350 pack
you will notice that my dyno graph is the example used
this should tell you all you need to know about my spec
saved me some typing

budgie

sorry, nearly forgot extras
aquamist
boost controller
Old 18 January 2006 | 05:58 PM
  #35  
wrc350bhp's Avatar
wrc350bhp
Scooby Regular
 
Joined: Aug 2005
Posts: 183
Likes: 0
Default

Originally Posted by GazTheHat
Hmmm, has anyone done a comparison between their 330 Kit:
http://www.wrc-tech.co.uk/subaru-04sti-WRC330.htm

And the TSL333 ?? That would be interesting reading. Especially as the WRC Tech conversion is over £300 cheaper.
tsl 333 is slow i had a go in their demo, either that or my car was mega quick
Old 18 January 2006 | 06:42 PM
  #36  
jd5217's Avatar
jd5217
Scooby Regular
 
Joined: Feb 2005
Posts: 2,156
Likes: 1
From: over the hills and far away
Default

had the 350 conversion done on mine in september, but removed the PPP package.

http://www.wrc-tech.co.uk/subaru-04sti-WRC350_2.htm

got 351bhp & 370lb/ft.

Very pleased

Last edited by jd5217; 19 January 2006 at 02:25 PM.
Old 18 January 2006 | 07:04 PM
  #37  
mickyjeff's Avatar
mickyjeff
Scooby Regular
iTrader: (2)
 
Joined: Mar 2005
Posts: 858
Likes: 0
From: sunny stockton in a 300bhp scooby
Default

Originally Posted by peter budgen
hi mick
if you look on wrc's web site at the 350 pack
you will notice that my dyno graph is the example used
this should tell you all you need to know about my spec
saved me some typing

budgie

sorry, nearly forgot extras
aquamist
boost controller
cheers mick
Old 18 January 2006 | 07:24 PM
  #38  
ex-webby's Avatar
ex-webby
Orange Club
 
Joined: Oct 1998
Posts: 13,763
Likes: 1
Default

Originally Posted by Andy Porter
**** me sideways I had no idea you could get that sort of power from a 'uk' turbo, I only thought the twin scrolls could reach that-very impressive. Now wheres the trader for standard UK 9's If only
Andy,
It's not all about peak figures as in isolation they dont mean a fat lot. You try comparing the entire graph from a twin scroll to a UK car (especially up to 4.5k-5k..... then the benefits of a twin scroll become clearer!

Regardless though...... figures for a UK car are very good!

Regards,
Shaun.
Old 18 January 2006 | 07:27 PM
  #39  
Budgie's Avatar
Budgie
Scooby Regular
iTrader: (4)
 
Joined: Jul 2001
Posts: 10,429
Likes: 0
From: MSOC..........middlesex subaru owners club
Default

thanks webby

budgie
Old 19 January 2006 | 09:01 AM
  #40  
Andy Porter's Avatar
Andy Porter
Scooby Regular
 
Joined: Nov 1999
Posts: 2,490
Likes: 0
Default

Originally Posted by webmaster
Andy,
It's not all about peak figures as in isolation they dont mean a fat lot. You try comparing the entire graph from a twin scroll to a UK car (especially up to 4.5k-5k..... then the benefits of a twin scroll become clearer!

Regardless though...... figures for a UK car are very good!

Regards,
Shaun.
Cheers Shaun Rock on JDM's
Old 19 January 2006 | 09:52 AM
  #41  
GazTheHat's Avatar
GazTheHat
Scooby Regular
 
Joined: Aug 2005
Posts: 7,638
Likes: 0
From: 392/361 MY04 STi
Default

Originally Posted by wrc350bhp
tsl 333 is slow i had a go in their demo, either that or my car was mega quick
Interesting. So the 333 & chargecooler (which their demo car is) didn't feel as quick as the wrc350. Hmmm....

(Must save harder!!)
Old 19 January 2006 | 10:44 AM
  #42  
p1doc's Avatar
p1doc
Scooby Regular
 
Joined: Jun 2002
Posts: 3,034
Likes: 0
Default

Originally Posted by GazTheHat
Interesting. So the 333 & chargecooler (which their demo car is) didn't feel as quick as the wrc350. Hmmm....

(Must save harder!!)
would be interesting in a car to car comparison as well as an independent dyno
martin
Old 20 January 2006 | 03:21 PM
  #43  
Joescoobs74's Avatar
Joescoobs74
Scooby Regular
 
Joined: Oct 2004
Posts: 231
Likes: 0
Default

Do WRC Tech. use Tek3 in their overall package, as its not that clear from their website? Whats the quality/fit/sound like of their APS exhaust systems?
Old 20 January 2006 | 03:48 PM
  #44  
Robocop's Avatar
Robocop
Scooby Regular
 
Joined: Jun 2004
Posts: 950
Likes: 0
From: Old Detroit aka Chippenham
Default

Originally Posted by Joescoobs74
Do WRC Tech. use Tek3 in their overall package, as its not that clear from their website? Whats the quality/fit/sound like of their APS exhaust systems?
Yes it's a Ecutek remap.
Old 20 January 2006 | 09:03 PM
  #45  
Budgie's Avatar
Budgie
Scooby Regular
iTrader: (4)
 
Joined: Jul 2001
Posts: 10,429
Likes: 0
From: MSOC..........middlesex subaru owners club
Default

Originally Posted by Joescoobs74
Do WRC Tech. use Tek3 in their overall package, as its not that clear from their website? Whats the quality/fit/sound like of their APS exhaust systems?
the aps exhaust sound awesome m8
i have the 3.5 inch system
pop by if you dont believe me

budgie
Old 20 January 2006 | 10:11 PM
  #46  
sherlock's Avatar
sherlock
Scooby Regular
iTrader: (1)
 
Joined: Aug 2001
Posts: 762
Likes: 0
From: 22b Baker St
Default

Hay Budgie,
Going back to WRC next week! Spoke to Alan yesterday and i'm now going back for APS induction kit, TMIC and re-map! I only popped in as i was passing!

Sherlock

Last edited by sherlock; 20 January 2006 at 10:44 PM.
Old 22 January 2006 | 09:00 AM
  #47  
jimby's Avatar
jimby
Scooby Regular
 
Joined: May 2005
Posts: 64
Likes: 0
Default

Originally Posted by ScoobyH
I had 330 conv done in June on a V7 sti no ppp..Transformed the performance of the car, went from 254bhp to 330bhp and 250FTlb torque to 350FTLb. Fuel consumption has remained the same.
it makes more torque by using more fuel. its one of the basic principles of engines.

if you run a 250ftlb engine at full load next to a 350ftlb engine at full load and measure the two rates of fuel use the 350lbft engine will consume fuel at a faster rate. assuming they are running the correct and same air/fuel ratio (which they would be to meet emissions)

Old 22 January 2006 | 10:35 AM
  #48  
davedipster's Avatar
davedipster
Scooby Senior
 
Joined: Sep 2003
Posts: 2,600
Likes: 0
From: Essex
Default

Don't std cars over fuel anyway, so a sensible remap may not see vastly decreased mpg.
Old 22 January 2006 | 11:00 AM
  #49  
JohnD's Avatar
JohnD
Scooby Regular
iTrader: (5)
 
Joined: Apr 2000
Posts: 6,252
Likes: 1
From: Havering, Essex
Default

I would love some more torque and driveability from my STi PPP but don't want a non standard looking underbonnet. Would not a re-map with the use of a free flowing panel filter give worthwhile gains? I would not dismiss the bigger intercooler if I thought it would give positive advantage over the standard STi unit, but I don't particularly want the induction kit.
Who has had a re-map on an otherwise standard PPP?
JohnD
Old 22 January 2006 | 11:59 AM
  #50  
davedipster's Avatar
davedipster
Scooby Senior
 
Joined: Sep 2003
Posts: 2,600
Likes: 0
From: Essex
Default

I'm guessing @ £600 for a re-map and 3 port thingy.
Apart from that std and 320hp.

Just what I have read on here.

dipster
Old 22 January 2006 | 01:46 PM
  #51  
Nixon's Avatar
Nixon
Scooby Regular
 
Joined: Apr 2004
Posts: 257
Likes: 0
From: Dorchester | Dorset
Default

I too had the WRC330 fitted to my standard STi-8 Type UK, made 344.9bhp and 360ft/lb.

Now fitted the Andy.F 18g hybrid turbo with remap by him also to about 380bhp / 380ft/lb..... just even more lairy than before!

Next up FMIC, parallel fuel lines and coilovers
Old 22 January 2006 | 01:54 PM
  #52  
Ministry Maniac's Avatar
Ministry Maniac
Scooby Regular
 
Joined: Mar 2003
Posts: 120
Likes: 0
From: In front of an evo
Default

Originally Posted by JohnD
I would love some more torque and driveability from my STi PPP but don't want a non standard looking underbonnet. Would not a re-map with the use of a free flowing panel filter give worthwhile gains? I would not dismiss the bigger intercooler if I thought it would give positive advantage over the standard STi unit, but I don't particularly want the induction kit.
Who has had a re-map on an otherwise standard PPP?
JohnD

I am in the same position. Would like a bit more from the ppp but don't want to change the intercooler and dont want the noise from the induction kit. I was thinking of putting a green panel filter in and having the TSL 333 remap. Should see some improvement over standard ppp.
Old 22 January 2006 | 04:53 PM
  #53  
D-an-W's Avatar
D-an-W
Scooby Regular
iTrader: (1)
 
Joined: Jan 2006
Posts: 1,016
Likes: 0
From: Trumpton
Default

@ budgie

Are they hydraulic bonnet stays standard on the STi, if not more details please?

Tnx...D-an-W
Old 22 January 2006 | 05:55 PM
  #54  
wrc350bhp's Avatar
wrc350bhp
Scooby Regular
 
Joined: Aug 2005
Posts: 183
Likes: 0
Default

Originally Posted by GazTheHat
Interesting. So the 333 & chargecooler (which their demo car is) didn't feel as quick as the wrc350. Hmmm....

(Must save harder!!)
just to put the record straight mine was dynoed at 350 by wrc not modded by them, chris said on a good day would do over 360,car now sold now have 05 standard sti awaiting further mods
Old 22 January 2006 | 08:17 PM
  #55  
Budgie's Avatar
Budgie
Scooby Regular
iTrader: (4)
 
Joined: Jul 2001
Posts: 10,429
Likes: 0
From: MSOC..........middlesex subaru owners club
Default

Originally Posted by D-an-W
@ budgie

Are they hydraulic bonnet stays standard on the STi, if not more details please?

Tnx...D-an-W
no m8
scott lowe group buy
well worth it
£65 i think

budgie
Old 22 January 2006 | 08:19 PM
  #56  
Budgie's Avatar
Budgie
Scooby Regular
iTrader: (4)
 
Joined: Jul 2001
Posts: 10,429
Likes: 0
From: MSOC..........middlesex subaru owners club
Default

Originally Posted by sherlock
Hay Budgie,
Going back to WRC next week! Spoke to Alan yesterday and i'm now going back for APS induction kit, TMIC and re-map! I only popped in as i was passing!

Sherlock
put mine on the rollers again today
ran a 365BHP using octane booster and optimax
well pleased, i love the winter mornings

budgie
Old 22 January 2006 | 08:31 PM
  #57  
~DrEaM~'s Avatar
~DrEaM~
Scooby Regular
 
Joined: Oct 2005
Posts: 1,746
Likes: 0
From: Herts
Default

Originally Posted by peter budgen
put mine on the rollers again today
ran a 365BHP using octane booster and optimax
well pleased, i love the winter mornings

budgie
is it possible to get 350 without the APS TMIC??
Old 22 January 2006 | 08:33 PM
  #58  
RobHardy's Avatar
RobHardy
Scooby Regular
 
Joined: Jan 2006
Posts: 139
Likes: 0
From: High Wycombe
Default

that is well good. i bet that is so fast.
Old 22 January 2006 | 09:37 PM
  #59  
Budgie's Avatar
Budgie
Scooby Regular
iTrader: (4)
 
Joined: Jul 2001
Posts: 10,429
Likes: 0
From: MSOC..........middlesex subaru owners club
Default

Originally Posted by ~DrEaM~
is it possible to get 350 without the APS TMIC??
sorry ,dont know

budgie
Old 22 January 2006 | 09:38 PM
  #60  
WR 1mposter's Avatar
WR 1mposter
Scooby Regular
iTrader: (1)
 
Joined: Jul 2005
Posts: 812
Likes: 0
From: SW Cornwall
Default

Originally Posted by ~DrEaM~
is it possible to get 350 without the APS TMIC??
I manage 361 / 378 on a rolling road day with a little boost on a standard sti tmic with out boost 345 /350 but it was a hot day so......

And will be going back next week for some extra bits


Quick Reply: sti7 ppp - wrc tech "wrc 350" upgrade



All times are GMT +1. The time now is 12:53 AM.